i`m going to use sysiob post as template:
Short report:
Units arrived yesterday - Romania.
Started smoothly, zero problems with the units, had some problems with PSUs (shuting down because there was no load on the 5v rail), digging with nominal speed.
Paid 180 lei (~45eur) fiscal taxes.
2 AntMiner (425w each) + raspeberyPi + BFL Little Single (150w) = 1kwh
big thanks sushi & bitmain
Topic: [GROUP BUY CLOS & SHIPPED] - ** GIVEAWAY ** BITMAIN AntMiner 180 GH/S 300 Units - page 4. (Read 38021 times)
December 20, 2013, 06:25:32 AM
December 20, 2013, 04:51:19 AM
Short report:
Unit arrived yesterday - Poland.
Started smoothly, zero problems, digging with nominal speed.
Paid 100 pln (25eur) fiscal taxes.
big thanks sushi & bitmain
Unit arrived yesterday - Poland.
Started smoothly, zero problems, digging with nominal speed.
Paid 100 pln (25eur) fiscal taxes.
big thanks sushi & bitmain
December 20, 2013, 04:27:08 AM
it leaving the customs \o/
What country are you in Xer0? December 20, 2013, 01:24:04 AM
it leaving the customs \o/
How did you explain it to the customs in the end?
Or what kind of proof was valid for them?
I'm probably going to have the same problem... That's why I'm asking
December 19, 2013, 07:43:42 PM
Fastest shipping I've ever seen from China and absolutely zero issues with the product. Extremely satisfied. Thanks BITMAIN and Sushi.
December 19, 2013, 07:35:40 PM
it leaving the customs \o/
right on, received mine, and hashing away....
December 19, 2013, 06:47:16 PM
Go go drawing!
December 19, 2013, 06:46:35 PM
it leaving the customs \o/
December 19, 2013, 06:17:06 PM
I was referring to BTC guild the pool... not BTC price, to which I agree with you.
Very well, then, lol.
@sushi, my man. What's the good word?
December 19, 2013, 05:11:57 PM
i didnt got them yet because only one from 2 packages got here right now ... btw .. any news with loterry ?
December 19, 2013, 04:01:43 PM
Sushi, racking # was actually correct, for some reason when I copy and pasted out of the subject line, it must of had some weird formatting because it wouldn't recognize it. So after manually typing it in it worked. Should show up today!
December 19, 2013, 03:48:03 PM
Thank you!!!
Miner delivered and running with a bag full of O's
Another successful job well done, I have sent the remnants of my wallet to Sushi's Tip Jar
Another successful job well done, I have sent the remnants of my wallet to Sushi's Tip Jar
December 19, 2013, 03:37:56 PM
Miner delivered and running with a bag full of O's
Another successful job well done, I have sent the remnants of my wallet to Sushi's Tip Jar
Another successful job well done, I have sent the remnants of my wallet to Sushi's Tip Jar
December 19, 2013, 03:22:54 PM
base power could be the issue...
Try connect a fan on 5v or a dvd.
What's the model number of that 1kW one? Most good high-end PSUs use a DC-DC design for the minor voltages, so don't need a load on them.
I had the non-start issue with some 1500w's , forgot to try the 5v fix.
Received all my 4 miners, everything worked fine, thanks a lot!
By the way I've noticed that while my low power (around 600W) Coolermaster PSUs had no problem powering ants from the start, my bigger 1kW Coolermaster PSU didn't want to start with ants (or ant, doesn't matter) connected to it, but if I turned it first, and after few secconds connected cables to ants, everything worked fine, so I guess some PSUs don't like to have high load from the start.
Paid 356 zł VAT to courier, so around 100 USD / 80 EUR.
By the way I've noticed that while my low power (around 600W) Coolermaster PSUs had no problem powering ants from the start, my bigger 1kW Coolermaster PSU didn't want to start with ants (or ant, doesn't matter) connected to it, but if I turned it first, and after few secconds connected cables to ants, everything worked fine, so I guess some PSUs don't like to have high load from the start.
Paid 356 zł VAT to courier, so around 100 USD / 80 EUR.
Try connect a fan on 5v or a dvd.
What's the model number of that 1kW one? Most good high-end PSUs use a DC-DC design for the minor voltages, so don't need a load on them.
December 19, 2013, 02:50:01 PM
The temp fix is too temp... Wire would not make contact after a short while.
try to ramm a piece of paperclip into the broken contact and then solder the parted wire to it December 19, 2013, 02:47:15 PM
I was referring to BTC guild the pool... not BTC price, to which I agree with you.
December 19, 2013, 02:08:35 PM
Yeah BTC has been on fire...
Irrelevant. If I mine x BTC, no matter what it's worth now, I have x BTC.Difficulty is on schedule to rise soon, so there's that...
December 19, 2013, 01:49:49 PM
Yeah BTC has been on fire...
December 19, 2013, 01:37:52 PM
I just got mine! However, there was a bad wire (looks like it broke off the connector).
I hope they can just send me a replacement wire harness.
http://dec.imghost.us/rWlw.jpg
http://dec.imghost.us/rWmp.jpg
I'm definately not going to power it up or anything in case it damages the unit. Please help, sushi! Can't hash without it, lol.
I hope they can just send me a replacement wire harness.
http://dec.imghost.us/rWlw.jpg
http://dec.imghost.us/rWmp.jpg
I'm definately not going to power it up or anything in case it damages the unit. Please help, sushi! Can't hash without it, lol.
Got mine since Dec 13 and I still haven't been able to use it properly due to the broken ribbon cable. Radio Shack does not any anything that would work. The temp fix is too temp... Wire would not make contact after a short while.
Lost a good window of luck at BTCGuild.
December 19, 2013, 01:28:23 PM
Received all my 4 miners, everything worked fine, thanks a lot!
By the way I've noticed that while my low power (around 600W) Coolermaster PSUs had no problem powering ants from the start, my bigger 1kW Coolermaster PSU didn't want to start with ants (or ant, doesn't matter) connected to it, but if I turned it first, and after few secconds connected cables to ants, everything worked fine, so I guess some PSUs don't like to have high load from the start.
Paid 356 zł VAT to courier, so around 100 USD / 80 EUR.
By the way I've noticed that while my low power (around 600W) Coolermaster PSUs had no problem powering ants from the start, my bigger 1kW Coolermaster PSU didn't want to start with ants (or ant, doesn't matter) connected to it, but if I turned it first, and after few secconds connected cables to ants, everything worked fine, so I guess some PSUs don't like to have high load from the start.
Paid 356 zł VAT to courier, so around 100 USD / 80 EUR.
Try connect a fan on 5v or a dvd.
What's the model number of that 1kW one? Most good high-end PSUs use a DC-DC design for the minor voltages, so don't need a load on them.
Jump to: