Topic: [Guide] Dogie's Comprehensive C-Scape BiFury USB Setup [HD] (Read 5791 times)
Dogie's Miner Setup Guides:
Nicely formatted version available at dogiecoin.com!
Contents:
0a) What to Expect
0b) What You Need
1) Powering
2) Cooling
3) Configuration
4) Troubleshooting
5) Where to buy
0a) What to Expect (top)
The BiFury is designed by c-scape and features 2 Bitfury generation chips. It ships in a USPS cardboard sleeve and is wrapped in copious amounts of static paper.
0b) What You Need (top)
You will need the following:
1) Powering (top)
BiFurys are USB based miners, and as such are powered directly from a USB hub. Hub choice is extremely important when running multiple miners. The USB2
specification is designed to provide up to 0.5A, and USB3 0.9A and so USB3 is strongly recommended.
2) Cooling (top)
External cooling is not strictly required at stock speeds, but is strongly recommended. This can be done with the use of a 120mm or USB powered fan.
3) Configuration (top)
Configuration is straight forward. Both BFG and CGMiner are currently supported and a Windows based PC is therefore recommended.
BFGMiner:
Antpool Register!
4) Troubleshooting (top)
TBD as problems arise.
Legal disclaimer: This information is for general guidance and does not constitute expert advice. We are not responsible if you, your property or a third
party is injured or damaged as a result of any interaction with this information, and no warranty is provided. All text and images are covered by copyright.
5) Where to buy (top)
Nicely formatted version available at dogiecoin.com!
Contents:
0a) What to Expect
0b) What You Need
1) Powering
2) Cooling
3) Configuration
4) Troubleshooting
5) Where to buy
0a) What to Expect (top)
The BiFury is designed by c-scape and features 2 Bitfury generation chips. It ships in a USPS cardboard sleeve and is wrapped in copious amounts of static paper.
| Chips | 2x Bitfury gen2 |
| Hashrate | ~5GH stock |
| Rated Voltage | 5V |
| Rated Current | 0.9A |
| Power.Consumption | 4.5W |
0b) What You Need (top)
You will need the following:
- A host windows PC.
- A 1A+ USB hub (see below).
1) Powering (top)
BiFurys are USB based miners, and as such are powered directly from a USB hub. Hub choice is extremely important when running multiple miners. The USB2
specification is designed to provide up to 0.5A, and USB3 0.9A and so USB3 is strongly recommended.
- Plug in the USB hub's power adapter into the mains and the USB hub.
- Plug the BiFury into USB hub.
| USB 3 Hub: (Click.your.flag) |    |
2) Cooling (top)
External cooling is not strictly required at stock speeds, but is strongly recommended. This can be done with the use of a 120mm or USB powered fan.
| 120mm Fans: (Click.your.flag) | |
| USB fan: (Click.your.flag) | |
3) Configuration (top)
Configuration is straight forward. Both BFG and CGMiner are currently supported and a Windows based PC is therefore recommended.
BFGMiner:
- Plug in a USB cable from your USB hub to your PC.
- Power the BiFury as above and turn the hub on.
- No drivers need to be installed.
- Download BFGMiner and run it.
- Create a new text file using notepad, with your pool and miner information in it, as below. Save it as a .bat file in the same directory as BFGMiner.
- Run the bat file to start mining.
Antpool Register!
Code:
bfgminer.exe -o stratum.antpool.com:3333 -u username_worker -p anypassword
BTCGuild Register!Code:
bfgminer.exe -o stratum.btcguild.com:3333 -u username_worker -p anypassword
GHash IO Register!Code:
bfgminer.exe -o us1.ghash.io:3333 -u username_worker -p anypassword
4) Troubleshooting (top)
TBD as problems arise.
Legal disclaimer: This information is for general guidance and does not constitute expert advice. We are not responsible if you, your property or a third
party is injured or damaged as a result of any interaction with this information, and no warranty is provided. All text and images are covered by copyright.
5) Where to buy (top)
Jump to: