Happy New Years! Seventh alt coin thread! - page 35.

Truthchanter

sr. member

Activity: 689

Merit: 253

Quote from: philipma1957 on March 29, 2018, 09:36:31 AM

Quote from: Truthchanter on March 29, 2018, 09:32:36 AM

Anyone have a good mining profit calculator for ravencoin? Or if not can someone explain how to manually calculate profit? I've always relied on calculators like whattomine.com

Just mine ½ your gear on raven and ½ on zec

and look at daily numbers.

raven is a hold coin for the most part.

Pretty much all my gpus are AMD though

Also I prefer a sell immediately coin.. maybe sticking with eth is still better right now for me?

sNaKeyz0r91

member

Activity: 131

Merit: 10

Quote from: Storx on March 29, 2018, 08:33:48 AM

im using this miner on RVN
goo.gl/9QSF2n

-20 on all rigs, super stable....
avg ~19.33MH/s per 1080ti 70pwr/163core/-200mem

Currently mining on Suprnova @ 2,431.58MH/s average rate

You guys are suggesting that enemy is better than nevermore?
Right now on smOS I am using nevermore.

Thanks

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Truthchanter on March 29, 2018, 09:32:36 AM

Anyone have a good mining profit calculator for ravencoin? Or if not can someone explain how to manually calculate profit? I've always relied on calculators like whattomine.com

Just mine ½ your gear on raven and ½ on zec

and look at daily numbers.

raven is a hold coin for the most part.

Truthchanter

sr. member

Activity: 689

Merit: 253

Anyone have a good mining profit calculator for ravencoin? Or if not can someone explain how to manually calculate profit? I've always relied on calculators like whattomine.com

rdluffy

legendary

Activity: 2366

Merit: 1408

Guys, the best thing of Enemy miner is the usage of GPU, it's more stable than others, less spikes

Storx

full member

Activity: 322

Merit: 233

im using this miner on RVN
goo.gl/9QSF2n

-20 on all rigs, super stable....
avg ~19.33MH/s per 1080ti 70pwr/163core/-200mem

Currently mining on Suprnova @ 2,431.58MH/s average rate

Daaaveee

jr. member

Activity: 48

Merit: 1

Quote from: KaydenC on March 29, 2018, 04:59:47 AM

I'm using CCminer 2.2.5. Is there any performance benefits to enemy fork? I would prefer not to update all rigs to 390 drivers if possible, they are all rock solid on 385 drivers

Enemy is definitely faster, I'm not sure exactly how much, some have mentioned a 20% figure? That might be a tad optimistic I think, but it was definitely worthwhile for me to swap from 2.2.5, although that is only over 3 rigs.

vg54dettrecover

newbie

Activity: 9

Merit: 0

Thx!

konqueror

member

Activity: 99

Merit: 10

You can use ocminer's version too:

https://github.com/ocminer/suprminer

KaydenC

sr. member

Activity: 610

Merit: 265

I'm using CCminer 2.2.5. Is there any performance benefits to enemy fork? I would prefer not to update all rigs to 390 drivers if possible, they are all rock solid on 385 drivers

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: vg54dettrecover on March 29, 2018, 04:47:19 AM

Anyone could provide a working link to download enemy miner for windows ?

the enemy miner is a fork of tpruvot's ccminer

http://cryptomining-blog.com/9507-ccminer-enemy-1-03-fork-for-raven-rvn-mining-now-available/

There are also others in the NVIDIA camp...

Current releases:
https://github.com/brian112358/nevermore-miner/releases
Credit: Brianmct

https://github.com/MSFTserver/ccminer/releases/tag/2.2.5-rvn
Credit: tpruvot, and MSFTserver for hosting

vg54dettrecover

newbie

Activity: 9

Merit: 0

Anyone could provide a working link to download enemy miner for windows ?

tadeus1

member

Activity: 140

Merit: 11

I would say i19 is a sweet spot for me as well.
With only exception the raven coin makes my gpus' coils whine like crazy and the psu usage is like candlesticks up and down.
But overall pretty good so far with superminer and nevermore.
Nevermore seems better on win while superminer works better on my linux.

Daaaveee

jr. member

Activity: 48

Merit: 1

Quote from: citronick on March 28, 2018, 11:13:52 PM

-i 19 seems to be the sweetspot and get rejects low (ccminer/enemy-NVIDIA)

-i 21 goes to beast mode but unstable and could get your PSU rekt (use sgminer-brian-AMD instead, add -I 21 --thread-concurrency 1024 --gpu-threads 2)

d=16 minimum diff for x16R as per yiimp pool, so if you are at suprnova just remove it since ocminer said no need to set diff - the stratum servers will take care of it in the backend.

If you have VEGA cards, you will need AceNine sgminer instead.

How about -i 20? Seems to get a little more hash and is stable for me on enemy-1.03. I didn't test -i 19 that thoroughly though.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: crazydane on March 28, 2018, 10:28:37 PM

Quote from: citronick on March 28, 2018, 08:24:44 PM

try that ccminer-enemy fork with d=16 -i 19 settings

Thanks for the tip! I couldn't get ccminer running reliably under HIVE OS before, but after switching to the enemy fork, I doing just under 1 GH/s on x16r:
.
.
.

-i 19 seems to be the sweetspot and get rejects low (ccminer/enemy-NVIDIA)

-i 21 goes to beast mode but unstable and could get your PSU rekt (use sgminer-brian-AMD instead, add -I 21 --thread-concurrency 1024 --gpu-threads 2)

d=16 minimum diff for x16R as per yiimp pool, so if you are at suprnova just remove it since ocminer said no need to set diff - the stratum servers will take care of it in the backend.

If you have VEGA cards, you will need AceNine sgminer instead.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: crazydane on March 28, 2018, 10:28:37 PM

Quote from: citronick on March 28, 2018, 08:24:44 PM

try that ccminer-enemy fork with d=16 -i 19 settings

Thanks for the tip! I couldn't get ccminer running reliably under HIVE OS before, but after switching to the enemy fork, I doing just under 1 GH/s on x16r:

Nice numbers

RKXAduAisDkpM91x91E9cddTFUTkHxjDC3

crazydane

full member

Activity: 558

Merit: 194

Quote from: citronick on March 28, 2018, 08:24:44 PM

try that ccminer-enemy fork with d=16 -i 19 settings

Thanks for the tip! I couldn't get ccminer running reliably under HIVE OS before, but after switching to the enemy fork, I doing just under 1 GH/s on x16r:

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Just saw Newegg.ca now accepting BTC

https://www.newegg.ca/promotions/nepro/18-0812/index.html

Anybody tried it yet?

Is newegg dot ca only exclusively for Canadians?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: citronick on March 28, 2018, 08:24:44 PM

Quote from: Moondoggie on March 28, 2018, 08:17:36 PM

Hi guys,
I've jumped on the rvn bandwagon, but on 3 of 6 rigs I get the error
"Cude error in func 'cuda_check_cpu_setTarget' at line 41 : unspecified launch failure.

All rigs are the same, but the three with issues are in a different location.

Specs are asus z370a, 8gb ram, core i3 8100, 7x 1080ti
80% PL, +76 Core, +74 Mem

I have tried with intensity -19 and --cpu-priority 3
Any other suggestions?

try that ccminer-enemy fork with d=16 -i 19 settings

I have 5 rigs 16x 1080tis running it

using smos stable and makes more then zec

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Moondoggie on March 28, 2018, 08:17:36 PM

Hi guys,
I've jumped on the rvn bandwagon, but on 3 of 6 rigs I get the error
"Cude error in func 'cuda_check_cpu_setTarget' at line 41 : unspecified launch failure.

All rigs are the same, but the three with issues are in a different location.

Specs are asus z370a, 8gb ram, core i3 8100, 7x 1080ti
80% PL, +76 Core, +74 Mem

I have tried with intensity -19 and --cpu-priority 3
Any other suggestions?

try that ccminer-enemy fork with d=16 -i 19 settings

Topic: Happy New Years! Seventh alt coin thread! - page 35. (Read 34166 times)