HashFast BabyJet users thread - page 9.

btchedge

member

Activity: 92

Merit: 10

Still got one sick board that won't work. Anyone have any ideas on this...

Code:

 cgminer version 4.1.0 - Started: [2014-03-12 16:11:59]
--------------------------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m
 ST: 3  SS: 0  NB: 2  LW: 157  GF: 0  RF: 0
 Connected to us-vip-stratum.btcguild.com diff 512 with stratum as user x
 Block: ddfae88e...  Diff:3.81G  Started: [16:12:56]  Best share: 0
--------------------------------------------------------------------------------------------------
 [U]SB device management [P]ool management [S]ettings [D]isplay options [Q]uit
  0: HFB  0: 500MHz   0C  33% 0.60V  | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 WU:0.0/m
--------------------------------------------------------------------------------------------------
 [2014-03-12 16:13:07] HFB 0 HFHash usb write err:(-7) LIBUSB_ERROR_TIMEOUT
 [2014-03-12 16:13:07] HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS
 [2014-03-12 16:13:07] HFB 0 HFGetHeader usb read err:(-4) LIBUSB_ERROR_NO_DEVICE
 [2014-03-12 16:13:07] HFB 0: hfa_send_frame: USB Send error, ret 0 amount 0 vs. tx_length 64, retrying
 [2014-03-12 16:13:07] HFB 0 failure, disabling!
 [2014-03-12 16:13:12] HFA: Found old instance by op name 6c59a3e4 at device 0
 [2014-03-12 16:13:14] HFA 4 HFGetHeader usb read err:(-9) LIBUSB_ERROR_PIPE
 [2014-03-12 16:13:14] HFA 4 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
 [2014-03-12 16:13:14] Hotplug: Hashfast added HFA 4
 [2014-03-12 16:13:25] HFA: Found old instance by op name 6c59a3e4 at device 0
 [2014-03-12 16:13:50] HFA 5 HFClearRead usb read err:(-9) LIBUSB_ERROR_PIPE
 [2014-03-12 16:13:50] HFA 5 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
 [2014-03-12 16:13:50] Hotplug: Hashfast added HFA 5
 [2014-03-12 16:13:56] HFA: Found old instance by op name 6c59a3e4 at device 0
 [2014-03-12 16:14:09] Hotplug: Hashfast added HFB 0
 [2014-03-12 16:14:09] HFB 0 HFHash usb write err:(-7) LIBUSB_ERROR_TIMEOUT
 [2014-03-12 16:14:10] HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS
 [2014-03-12 16:14:10] HFB 0 HFGetHeader usb read err:(-4) LIBUSB_ERROR_NO_DEVICE
 [2014-03-12 16:14:10] HFB 0: hfa_send_frame: USB Send error, ret 0 amount 0 vs. tx_length 64, retrying
 [2014-03-12 16:14:10] HFB 0 failure, disabling!
 [2014-03-12 16:14:15] HFA: Found old instance by op name 6c59a3e4 at device 0
 [2014-03-12 16:14:51] HFA 7 HFClearRead usb read err:(-9) LIBUSB_ERROR_PIPE
 [2014-03-12 16:14:51] HFA 7 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
 [2014-03-12 16:14:51] Hotplug: Hashfast added HFA 7
 [2014-03-12 16:14:56] HFA: Found old instance by op name 6c59a3e4 at device 0
 [2014-03-12 16:15:08] Hotplug: Hashfast added HFB 0
 [2014-03-12 16:15:09] HFB 0 HFHash usb write err:(-7) LIBUSB_ERROR_TIMEOUT
 [2014-03-12 16:15:09] HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS
 [2014-03-12 16:15:09] HFB 0 HFGetHeader usb read err:(-4) LIBUSB_ERROR_NO_DEVICE
 [2014-03-12 16:15:09] HFB 0: hfa_send_frame: USB Send error, ret 0 amount 0 vs. tx_length 64, retrying
 [2014-03-12 16:15:09] HFB 0 failure, disabling!
 [2014-03-12 16:15:14] HFA: Found old instance by op name 6c59a3e4 at device 0
 [2014-03-12 16:15:27] Hotplug: Hashfast added HFB 0
 [2014-03-12 16:15:27] HFB 0 HFHash usb write err:(-7) LIBUSB_ERROR_TIMEOUT
 [2014-03-12 16:15:27] HFB 0 HFGetHeader usb read err:(-4) LIBUSB_ERROR_NO_DEVICE
 [2014-03-12 16:15:28] HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS
 [2014-03-12 16:15:28] HFB 0 failure, disabling!
 [2014-03-12 16:15:33] HFA: Found old instance by op name 6c59a3e4 at device 0
 [2014-03-12 16:15:45] Hotplug: Hashfast added HFB 0
 [2014-03-12 16:15:45] HFB 0 HFHash usb write err:(-7) LIBUSB_ERROR_TIMEOUT
 [2014-03-12 16:15:45] HFB 0 HFGetHeader usb read err:(-4) LIBUSB_ERROR_NO_DEVICE
 [2014-03-12 16:15:45] HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS
 [2014-03-12 16:15:45] HFB 0 failure, disabling!
 [2014-03-12 16:15:51] HFA: Found old instance by op name 6c59a3e4 at device 0
 [2014-03-12 16:16:04] Hotplug: Hashfast added HFB 0
 [2014-03-12 16:16:04] HFB 0 HFHash usb write err:(-7) LIBUSB_ERROR_TIMEOUT
 [2014-03-12 16:16:04] HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS
 [2014-03-12 16:16:04] HFB 0 HFGetHeader usb read err:(-4) LIBUSB_ERROR_NO_DEVICE
 [2014-03-12 16:16:04] HFB 0: hfa_send_frame: USB Send error, ret 0 amount 0 vs. tx_length 64, retrying
 [2014-03-12 16:16:04] HFB 0 failure, disabling!
 [2014-03-12 16:16:09] HFA: Found old instance by op name 6c59a3e4 at device 0
 [2014-03-12 16:16:23] Hotplug: Hashfast added HFB 0
 [2014-03-12 16:16:23] HFB 0 HFHash usb write err:(-7) LIBUSB_ERROR_TIMEOUT
 [2014-03-12 16:16:23] HFB 0 HFGetHeader usb read err:(-4) LIBUSB_ERROR_NO_DEVICE
 [2014-03-12 16:16:23] HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS
 [2014-03-12 16:16:23] HFB 0 failure, disabling!

CurcO

member

Activity: 84

Merit: 10

Quote from: HashFast_CL on March 11, 2014, 04:05:46 PM

Quote from: phreakk on March 11, 2014, 11:48:26 AM

So with the new 4.1.0 cgminer these 2 lines are what I get spammed after 10secs:

HFB 0 HFGetHeader usb read err:(-1) LIBUSB_ERROR_IO
HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS

No errors like this with 3.11.0. Firmware issue? I still have original firmware from batch 2 shipment.

Try the .4 firmware; it helps reduce LIBUSB errors.

Any updates on the new FW .5 , ?

cedivad

legendary

Activity: 1176

Merit: 1001

So not even the usb communications are stable on that thing? lol.
Posted from * - #q1gIXi5SHCsrSWNn

Witness

member

Activity: 68

Merit: 10

Quote from: HashFast_CL on March 11, 2014, 04:05:46 PM

Quote from: phreakk on March 11, 2014, 11:48:26 AM

So with the new 4.1.0 cgminer these 2 lines are what I get spammed after 10secs:

HFB 0 HFGetHeader usb read err:(-1) LIBUSB_ERROR_IO
HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS

No errors like this with 3.11.0. Firmware issue? I still have original firmware from batch 2 shipment.

Try the .4 firmware; it helps reduce LIBUSB errors.

fake

HashFast_CL

full member

Activity: 168

Merit: 100

HashFast Community Liaison

Quote from: phreakk on March 11, 2014, 11:48:26 AM

So with the new 4.1.0 cgminer these 2 lines are what I get spammed after 10secs:

HFB 0 HFGetHeader usb read err:(-1) LIBUSB_ERROR_IO
HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS

No errors like this with 3.11.0. Firmware issue? I still have original firmware from batch 2 shipment.

Try the .4 firmware; it helps reduce LIBUSB errors.

HashFast_CL

full member

Activity: 168

Merit: 100

HashFast Community Liaison

Quote from: dooferorg on March 11, 2014, 10:55:12 AM

Just got the upgrade kit.. boy the new single 120x38mm fan for the single radiator is loud. Anyone know what mounting these things take? It looks like Intel attachment arrangement so any watercooler should be fine, yes?

I'm thinking of getting some 280mm radiators with 140mm fans.

You may use any standard ATX watercooling arrangement as long as it has enough cooling capacity for the ASIC.

The fan/radiator mount holes at the bottom of the case are industry standard.

dentro

member

Activity: 92

Merit: 10

Quote from: dooferorg on March 11, 2014, 10:55:12 AM

Just got the upgrade kit.. boy the new single 120x38mm fan for the single radiator is loud. Anyone know what mounting these things take? It looks like Intel attachment arrangement so any watercooler should be fine, yes?

I'm thinking of getting some 280mm radiators with 140mm fans.

what version did you get? Did they ship the new evo board?

joshv06

hero member

Activity: 991

Merit: 500

Quote from: dooferorg on March 11, 2014, 10:55:12 AM

Just got the upgrade kit.. boy the new single 120x38mm fan for the single radiator is loud. Anyone know what mounting these things take? It looks like Intel attachment arrangement so any watercooler should be fine, yes?

I'm thinking of getting some 280mm radiators with 140mm fans.

What order number were you?

phreakk

sr. member

Activity: 307

Merit: 250

So with the new 4.1.0 cgminer these 2 lines are what I get spammed after 10secs:

HFB 0 HFGetHeader usb read err:(-1) LIBUSB_ERROR_IO
HFB 0 attempted reset got err:(0) LIBUSB_SUCCESS

No errors like this with 3.11.0. Firmware issue? I still have original firmware from batch 2 shipment.

dooferorg

full member

Activity: 163

Merit: 100

Just got the upgrade kit.. boy the new single 120x38mm fan for the single radiator is loud. Anyone know what mounting these things take? It looks like Intel attachment arrangement so any watercooler should be fine, yes?

I'm thinking of getting some 280mm radiators with 140mm fans.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: tacotime on March 10, 2014, 06:34:52 PM

4.1.0 + FW 0.3 is the most stable for me -- since running both my miners with these there have been zero shutdowns. 4.1.0 also seems to produce less HW errors.

If I upgrade to FW 0.4, cgminer 4.1.0 shuts down cores for being bad ("squelching"), which seems to result in me losing hashrate.

I guess you can try the --hfa-noshed option with 0.4. It doesn't entirely disable the squelching but may leave more intact. I think they're false positives in that firmware to be honest.

tacotime

legendary

Activity: 1484

Merit: 1005

4.1.0 + FW 0.3 is the most stable for me -- since running both my miners with these there have been zero shutdowns. 4.1.0 also seems to produce less HW errors.

If I upgrade to FW 0.4, cgminer 4.1.0 shuts down cores for being bad ("squelching"), which seems to result in me losing hashrate.

xunknownx

member

Activity: 62

Merit: 10

Quote from: regular on March 09, 2014, 02:13:16 PM

Did anyone find the self updating rPI image not work for them? I plugged in the HDMI cable and the image boots up archlinux but then shuts down on its own despite having the BJ plugged in. No mention of any flashing of the firmware at all.

same here as well. im not sure if it got updated and i dont know how to check my firmware version.

DoogieHouser

full member

Activity: 133

Merit: 100

Bitcoin Enthusiast

Quote from: phreakk on March 10, 2014, 11:47:32 AM

Quote from: regular on March 09, 2014, 02:13:16 PM

Did anyone find the self updating rPI image not work for them? I plugged in the HDMI cable and the image boots up archlinux but then shuts down on its own despite having the BJ plugged in. No mention of any flashing of the firmware at all.

Same thing happens to me...

I updated the firmware with the update utility, from my laptop. It worked like a charm. I have yet to plug in the replacement Pi from HashFast.

phreakk

sr. member

Activity: 307

Merit: 250

Quote from: regular on March 09, 2014, 02:13:16 PM

Did anyone find the self updating rPI image not work for them? I plugged in the HDMI cable and the image boots up archlinux but then shuts down on its own despite having the BJ plugged in. No mention of any flashing of the firmware at all.

Same thing happens to me...

regular

sr. member

Activity: 297

Merit: 250

Did anyone find the self updating rPI image not work for them? I plugged in the HDMI cable and the image boots up archlinux but then shuts down on its own despite having the BJ plugged in. No mention of any flashing of the firmware at all.

starsoccer9

legendary

Activity: 1630

Merit: 1000

Quote from: minternj on March 08, 2014, 04:12:04 PM

Quote from: -ck on March 07, 2014, 11:59:23 PM

New version of cgminer - 4.1.0 - with dramatic stability and performance improvements for these devices, along with new features. This version will work with all older firmwares as well:

https://bitcointalksearch.org/topic/m.5581480

The cause of the regression in performance was found and this should outperform any previous cgminer releases.

Wow huge improvement with 4.1.0 so far. Thank you.

Id have to agree, I noticed my miner seems to be running more stable and around a constant speed +/-10ghash. It used to move 50 ghash.

minternj

sr. member

Activity: 434

Merit: 250

Quote from: -ck on March 07, 2014, 11:59:23 PM

New version of cgminer - 4.1.0 - with dramatic stability and performance improvements for these devices, along with new features. This version will work with all older firmwares as well:

https://bitcointalksearch.org/topic/m.5581480

The cause of the regression in performance was found and this should outperform any previous cgminer releases.

Wow huge improvement with 4.1.0 so far. Thank you.

cedivad

legendary

Activity: 1176

Merit: 1001

Since that they have the chips in hand, i'm quite sure that the customers would be more than happy to pay for the manufacturing costs of the PCB themselves if that meant faster shipments.

That is obliviously not the case. God knows what they are doing with those chips.

And yes, i agree with the "two boards is better than four" thing, they will once again use the ambiguity of their terms in their favour.
Posted from asd, ref#iSXWuIHQOG7sK61v

ninjarobot

hero member

Activity: 761

Merit: 500

Mine Silent, Mine Deep

Quote from: cedivad on March 08, 2014, 03:12:18 PM

Quote from: starsoccer9 on March 08, 2014, 08:00:26 AM

Any status on MPP that are now over a month late?

Quote

However, as some customers were starting to try to point out, this wasn't going to be the case; every evidence (or lack thereof) was pointing towards the worst: the first miners would have been shipped just before the end of December contractual deadline, and the MPP was a bad marketing joke, given the lack of a shipping timeframe.

http://hashfast.org/

Nice job on the wiki cedivad!

And yes, I think the plan for MPP is to wait until the new EVO PCB is done. If they can sell and market it as 800 GH/s they will only have to ship 2 boards instead of 4 based on the older PCB which will be a lot cheaper for HF. Of course it means more delays. And since there is no deadline they are likely to prioritize all existing and new orders over MPP.

Topic: HashFast BabyJet users thread - page 9. (Read 69008 times)