Pages:
Author

Topic: How will this change the world of mining?? GTX 1080 / 1070 - page 14. (Read 134091 times)

legendary
Activity: 3248
Merit: 1070

the 480 does 31MH on ethereum plus 750 on sia? i really doubt this is the case and at 150w...

show proof at least, anyway he pushed it too much, he can adjust the core to consume 150w while maintaining a good compromise

Elivop said his 480 can do that. But he did not show the power usage yet. Only showed the GPUZ displayed 100W. So the true power could be 175 *112% on the wall.

he showed that it can do 31Mh on etheruem only, not 31MH PLUS 750MH on sia
legendary
Activity: 1510
Merit: 1003
show proof at least, anyway he pushed it to much, he can adjust the core to consume 150w while maintaining a good compromise
Yes, I tried to see what it can at max. For a long run I use another settings ... and another coin )))
legendary
Activity: 3248
Merit: 1070
Mine is SuperJetstream with Samsung memory. They already have bios with increased TDP so they can OC better. Plus in palit thunderstorm utility you can raise gddr memory voltage to achieve better memory OC.

so you increased the voltage for the +1000 mem? this explain everything

180 watt for 29 eth and 780 sia is bad
rx 480 does around 26 eth and 470 sia for half the price , that is if you can find any rx 480 lol
Yes, it is not so spectaculars as in lbry or lyra2v2 but it is 30+780 against 26+470 with the same power usage.
Now I stop with (31.6eth+630sia)@2050/[email protected]. Doubt that rx480 can come near even with bios mods.

actually the 480 does that at a max of 150 watts, 180 watts is just too much for my PSU's

the 480 does 31MH on ethereum plus 750 on sia? i really doubt this is the case and at 150w...

show proof at least, anyway he pushed it too much, he can adjust the core to consume 150w while maintaining a good compromise
legendary
Activity: 1510
Merit: 1003
Mine is SuperJetstream with Samsung memory. They already have bios with increased TDP so they can OC better. Plus in palit thunderstorm utility you can raise gddr memory voltage to achieve better memory OC.

actually the 480 does that at a max of 150 watts, 180 watts is just too much for my PSU's

Actually i didn't do correct wattage measurements from the wall. I rely to nvidia software readings ... So I guess it is 170-180watt.
I know that bios mod for rx480 can push it to 32mhs eth but only in single mode and no less then 180watt with crazy temps.
legendary
Activity: 2408
Merit: 1102
Leading Crypto Sports Betting & Casino Platform
180 watt for 29 eth and 780 sia is bad
rx 480 does around 26 eth and 470 sia for half the price , that is if you can find any rx 480 lol
Yes, it is not so spectaculars as in lbry or lyra2v2 but it is 30+780 against 26+470 with the same power usage.
Now I stop with (31.6eth+630sia)@2050/[email protected]. Doubt that rx480 can come near even with bios mods.

actually the 480 does that at a max of 150 watts, 180 watts is just too much for my PSU's
newbie
Activity: 30
Merit: 0
Its a palit with Samsung memory. If you have Micron GDDR5 memory then you really can't clock it much higher than 4300. If you have still Samsung memory but a bad cooling solution (f.e. inno3d) then it might also only let you clock to ~4400.

I can mine with 4800 memory clock on my Palit, will check the speeds right now.

same thing can't oc above +600-700 or artifact will be all over the place, this with g1 gaming, samsung memory, what palit do you have jetstream or gamerock?
I just checked GPU-Z, and it says I've got GDDR5 (Micron).  I've never heard of Palit before.  Even more interesting that Amph has the same Samsung memory as you, but he's seeing the same OC limits that I am...  If there's a card out there that can OC that much more, I'm pretty damn tempted to return my cards, get a refund, and purchase them instead - and something tells me I'm not the only one that feels this way.
legendary
Activity: 3248
Merit: 1070
Its a palit with Samsung memory. If you have Micron GDDR5 memory then you really can't clock it much higher than 4300. If you have still Samsung memory but a bad cooling solution (f.e. inno3d) then it might also only let you clock to ~4400.

I can mine with 4800 memory clock on my Palit, will check the speeds right now.

same thing can't oc above +600-700 or artifact will be all over the place, this with g1 gaming, samsung memory, what palit do you have jetstream or gamerock?
legendary
Activity: 1473
Merit: 1086
Its a palit with Samsung memory. If you have Micron GDDR5 memory then you really can't clock it much higher than 4300. If you have still Samsung memory but a bad cooling solution (f.e. inno3d) then it might also only let you clock to ~4400.

I can mine with 4800 memory clock on my Palit, will check the speeds right now.
newbie
Activity: 30
Merit: 0
180 watt for 29 eth and 780 sia is bad
rx 480 does around 26 eth and 470 sia for half the price , that is if you can find any rx 480 lol
...Now I stop with (31.6eth+630sia)@2050/[email protected]...
What brand & model 1070 did you buy?  I can't get anywhere near those OC numbers without artifacts and forced reboots.  Best I've been able to do with my MSI Gaming X 1070 is 1950 core, 4465 memory, and 1031mV core voltage.
legendary
Activity: 1510
Merit: 1003
180 watt for 29 eth and 780 sia is bad
rx 480 does around 26 eth and 470 sia for half the price , that is if you can find any rx 480 lol
Yes, it is not so spectaculars as in lbry or lyra2v2 but it is 30+780 against 26+470 with the same power usage.
Now I stop with (31.6eth+630sia)@2050/[email protected]. Doubt that rx480 can come near even with bios mods.
legendary
Activity: 3248
Merit: 1070
you need to underclock the core, you will not lose much on sia and reduce wattage
legendary
Activity: 2408
Merit: 1102
Leading Crypto Sports Betting & Casino Platform
gtx1070 (palit)
with new driver and new claymore, win7
tdp 170(180??) + 14%
gpu 2037-2125
mem 2400
dcri 80: 29.8 eth + 780 sia
dcri 70: 30.8 eth + 720 sia
dcri 60: 31.5 eth + 630 sia
dcri 50: 32 eth + 530 sia
dcri 50: 32.2 eth + 430 sia
dcri 40: 32.4 eth + 324 sia

performance is TDP limited!
ETH only 33mhs, with voltage add

If there is a good tdp unlocked bios then it will be possible to have 33mhs+330 sia


180 watt for 29 eth and 780 sia is bad
rx 480 does around 26 eth and 470 sia for half the price , that is if you can find any rx 480 lol
legendary
Activity: 1510
Merit: 1003
gtx1070 (palit)
with new driver and new claymore, win7
tdp 170(180??) + 14%
gpu 2037-2125
mem 2400
dcri 80: 29.8 eth + 780 sia
dcri 70: 30.8 eth + 720 sia
dcri 60: 31.5 eth + 630 sia
dcri 50: 32 eth + 530 sia
dcri 50: 32.2 eth + 430 sia
dcri 40: 32.4 eth + 324 sia

performance is TDP limited!
ETH only 33mhs, with voltage add

If there is a good tdp unlocked bios then it will be possible to have 33mhs+330 sia
newbie
Activity: 4
Merit: 0
Quote

GTX1070 gets 500 more points in 3DMARK11 performance test!!!!!!
Mines same as 368.81...(1070, w7)
On 1070,w7 for me neoscrypt now making ~1000 kH/s also Lyra2 is faster 10-12%

ccminer 1.8.1

ps. welcome. My 1 post on forum.
legendary
Activity: 1030
Merit: 1006
NEW GEFORCE DRIVERS are out!!!!!!

Version 372.54

http://www.geforce.com/drivers

they improve something or just an useless update?

GTX1070 gets 500 more points in 3DMARK11 performance test!!!!!!
Mines same as 368.81...(1070, w7)
legendary
Activity: 1457
Merit: 1001
NEW GEFORCE DRIVERS are out!!!!!!

Version 372.54

http://www.geforce.com/drivers

they improve something or just an useless update?

GTX1070 gets 500 more points in 3DMARK11 performance test!!!!!!
full member
Activity: 174
Merit: 100
NEW GEFORCE DRIVERS are out!!!!!!

Version 372.54

http://www.geforce.com/drivers

they improve something or just an useless update?
Now you dont have to fix .inf to make it work under win 7/8
legendary
Activity: 3248
Merit: 1070
NEW GEFORCE DRIVERS are out!!!!!!

Version 372.54

http://www.geforce.com/drivers

they improve something or just an useless update?
legendary
Activity: 1457
Merit: 1001
NEW GEFORCE DRIVERS are out!!!!!!

Version 372.54

http://www.geforce.com/drivers
sr. member
Activity: 420
Merit: 250
Claymore is releasing the Nvidia dual miner in the next 24 hrs.

I'm trying to set up LBRY mining. I'm a bit confused with every set up guide, where is the wallet?
Have it cross your mind to put your exchange address? And to ask this at some other tread, i.e. LBRY or MINING or...

I would just prefer to not use exchanges and store everything in wallets and just use shapeshift to do exchanges.
Pages:
Jump to: