Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 674. (Read 5352367 times)
December 12, 2017, 01:19:22 PM
Maybe if you made it better for smaller miners to come back, since the price has gone up, reduce the dust level, the hashrate would boost again.
December 12, 2017, 01:04:27 PM
canaan 1,424.56THs, seems they have dropped significant Hash Rate. I wonder why? Also, I am about growing my farm with Avalons, does anyone have specs on the new A8 that is rumored to come out in January. Looking to add another ~150 TH/s to max out my available power. Any info regarding the A8 would be appreciated. THX Mine On!!
December 12, 2017, 11:45:15 AM
Quote
My S9 from late november batch is labeled as 13.5 but it always mining around 14.0 Th .
The autotune freq colum 'ídeal' shows it tries to get 13.5 Th but it does not succeed and get constant average value of 14.0 Th , same every reboot.
Downside of this extra TH is that the antminer takes 1500 watt instead of my older S9 that only consumes 1400 watt. I would like to underclock a little.
The autotune freq colum 'ídeal' shows it tries to get 13.5 Th but it does not succeed and get constant average value of 14.0 Th , same every reboot.
Downside of this extra TH is that the antminer takes 1500 watt instead of my older S9 that only consumes 1400 watt. I would like to underclock a little.
Im trying to find the downside to that unless electric is so expensive that you are not profiting from the extra btc you can earn from that miner compared to the others. but all of the antminers specs say they will do +/- 5% of the stated hashrate in their specs. But Id rather one that was a few % higher rather then under. Heck Id gladly trade someone one of my 13.5 for one that did 14 being that there dont seem to be any way that actully works to change the clock speed on the antminers with autotune. even threw the advanced config url all it does is let you pick a clock speed from a list and restart the miner only to have it still stay at whatever clock speed it decides to pick for optimal speed and temperature. and dont seem to do jack swat for changing the speed at all.
I have one that consistently outperforms the other two....doesn't matter when I start the miners up after switching pools, the same one eventually outperforms with higher hash rate. Seems to draw just about the same amount of power for me, have it running on 220.
December 12, 2017, 10:58:00 AM
Quote
My S9 from late november batch is labeled as 13.5 but it always mining around 14.0 Th .
The autotune freq colum 'ídeal' shows it tries to get 13.5 Th but it does not succeed and get constant average value of 14.0 Th , same every reboot.
Downside of this extra TH is that the antminer takes 1500 watt instead of my older S9 that only consumes 1400 watt. I would like to underclock a little.
The autotune freq colum 'ídeal' shows it tries to get 13.5 Th but it does not succeed and get constant average value of 14.0 Th , same every reboot.
Downside of this extra TH is that the antminer takes 1500 watt instead of my older S9 that only consumes 1400 watt. I would like to underclock a little.
Im trying to find the downside to that unless electric is so expensive that you are not profiting from the extra btc you can earn from that miner compared to the others. but all of the antminers specs say they will do +/- 5% of the stated hashrate in their specs. But Id rather one that was a few % higher rather then under. Heck Id gladly trade someone one of my 13.5 for one that did 14 being that there dont seem to be any way that actully works to change the clock speed on the antminers with autotune. even threw the advanced config url all it does is let you pick a clock speed from a list and restart the miner only to have it still stay at whatever clock speed it decides to pick for optimal speed and temperature. and dont seem to do jack swat for changing the speed at all.
December 12, 2017, 09:35:35 AM
Quote from: jmccall005
I currently mine only with a bitcoin address and can view my stats via
www.kano.is/address.php?a=(BITCOIN ADDRESS). I just do not see any stats of when I have been paid or how often. Is there a detailed page that displays any of this information.
I also apologize if I wasn't supposed to start a new topic to receive this info.
Thanks!
You don't get any stats other than 'current' worker stats, if you mine to an address.www.kano.is/address.php?a=(BITCOIN ADDRESS). I just do not see any stats of when I have been paid or how often. Is there a detailed page that displays any of this information.
I also apologize if I wasn't supposed to start a new topic to receive this info.
Thanks!
The payout info is your wallet.
If you want more stats then you need to mine to an account.
Got it, Thanks!
December 12, 2017, 09:03:48 AM
Using the Kano Pool, I currently mine only with a bitcoin address and can view my stats via
www.kano.is/address.php?a=(BITCOIN ADDRESS) and or using the CKPOOL app for android.
I just do not see any stats of when I have been paid or how often. Is there a detailed page that displays any of payment information.
https://bitcointalksearch.org/topic/m.26171713 www.kano.is/address.php?a=(BITCOIN ADDRESS) and or using the CKPOOL app for android.
I just do not see any stats of when I have been paid or how often. Is there a detailed page that displays any of payment information.
December 12, 2017, 09:00:11 AM
You have to set up an account and mine to that if you want to see reward stats.
December 12, 2017, 08:34:28 AM
Using the Kano Pool, I currently mine only with a bitcoin address and can view my stats via
www.kano.is/address.php?a=(BITCOIN ADDRESS) and or using the CKPOOL app for android.
I just do not see any stats of when I have been paid or how often. Is there a detailed page that displays any of payment information.
www.kano.is/address.php?a=(BITCOIN ADDRESS) and or using the CKPOOL app for android.
I just do not see any stats of when I have been paid or how often. Is there a detailed page that displays any of payment information.
December 12, 2017, 08:32:58 AM
Yikes
December 12, 2017, 08:28:10 AM
Does anyone use a Nano Ledger S as their wallet for BTC (actually anything)? Are you getting this all the time?
December 12, 2017, 08:23:54 AM
Common!
December 12, 2017, 05:44:39 AM
Many of us buy only from the mfrs direct, or from endorsed, official distributors
Would BITMAIN pre-sell one version and then ship a different one?
This is what Eastshore is claiming why they have the different version to ship in the first place.
FWIW, the 2 S9's I ordered for Dec 11-20th batch show Antminer S9-14TH/s in the order status. Granted that doesn't mean anything since I think they claim +/- 5%. This is my first Bitmain order.
My S9 from late november batch is labeled as 13.5 but it always mining around 14.0 Th .
The autotune freq colum 'ídeal' shows it tries to get 13.5 Th but it does not succeed and get constant average value of 14.0 Th , same every reboot.
Downside of this extra TH is that the antminer takes 1500 watt instead of my older S9 that only consumes 1400 watt. I would like to underclock a little.
December 12, 2017, 04:05:20 AM
Hmmm.... I think a little FAQ with the main questions that are asked over and over again here in this thread
will be a really important thing and should be placed somewhere.
If I was new to this pool I just pointed my S3 to this pool just to give it a try. I don't really care about payments and stuff.
But if you bought a serious miner for 2-3k or more than one and like to get your roi you need these informations.
I started reading the thread, but there is no way to find all of your answers in the thread as noob in time.
I know most people don't even read the faq, but if someone ask a noobish question in this thread you
can just point him to the faq.
So I just think a FAQ would be a really good idea.
will be a really important thing and should be placed somewhere.
If I was new to this pool I just pointed my S3 to this pool just to give it a try. I don't really care about payments and stuff.
But if you bought a serious miner for 2-3k or more than one and like to get your roi you need these informations.
I started reading the thread, but there is no way to find all of your answers in the thread as noob in time.
I know most people don't even read the faq, but if someone ask a noobish question in this thread you
can just point him to the faq.
So I just think a FAQ would be a really good idea.
December 12, 2017, 02:51:20 AM
Rubbing Lucky Rabbits foot, just sacrificed a piece of Lasagna and a Diet Coke for a Block!! Come on Luck, Lets Do This and Get 'r Done! We want variance to go our way!! Mine On.
December 12, 2017, 01:32:04 AM
Thanks for the NO FEE TIL 2018
I just joined Kano Pool. At the moment I have one S9 pointed to the pool that has been running for about 1.5 days. (I also have 27 more S9's shipping from Bitmain over the next couple of months and I am planning on pointing them all to Kano as well).
I have read Kano's "Payout Page" in order to understand how Payouts work. And I think I got it. But I am still unclear as to how often payments get made (Is it every evening?) - And, why is it that some portion of the "payout computation" is performed manually? Can't it be automated?
Currently once per block - what you earn in the block (if it's above dust) gets sent to you when I process the block's transaction at 101 confirms.I just joined Kano Pool. At the moment I have one S9 pointed to the pool that has been running for about 1.5 days. (I also have 27 more S9's shipping from Bitmain over the next couple of months and I am planning on pointing them all to Kano as well).
I have read Kano's "Payout Page" in order to understand how Payouts work. And I think I got it. But I am still unclear as to how often payments get made (Is it every evening?) - And, why is it that some portion of the "payout computation" is performed manually? Can't it be automated?
Quote
Also, how can I see (or estimate) my payout?
Is there a really good place (or book) I can go to read up on and better understand this?
Probably best here:Is there a really good place (or book) I can go to read up on and better understand this?
http://tradebtc.net/bitcalc.php
Put in your hash rate at "Your TH/s:" and it will estimate what you should average per day
(though it subtracts the 0.9% fee - but of course there's currenty no fee here until 2018)
At the moment we average about 1 block every 3 days, so your block reward would of course be something like 3 days expected reward, per block.
Another way you can work out what the average block time might be is to: look at the 5Nd time estimate on the Payouts Help page, and divide that by 5
December 11, 2017, 11:50:53 PM
Thanks for the NO FEE TIL 2018
I just joined Kano Pool. At the moment I have one S9 pointed to the pool that has been running for about 1.5 days. (I also have 27 more S9's shipping from Bitmain over the next couple of months and I am planning on pointing them all to Kano as well).
I have read Kano's "Payout Page" in order to understand how Payouts work. And I think I got it. But I am still unclear as to how often payments get made (Is it every evening?) - And, why is it that some portion of the "payout computation" is performed manually? Can't it be automated?
Also, how can I see (or estimate) my payout?
Is there a really good place (or book) I can go to read up on and better understand this?
I just joined Kano Pool. At the moment I have one S9 pointed to the pool that has been running for about 1.5 days. (I also have 27 more S9's shipping from Bitmain over the next couple of months and I am planning on pointing them all to Kano as well).
I have read Kano's "Payout Page" in order to understand how Payouts work. And I think I got it. But I am still unclear as to how often payments get made (Is it every evening?) - And, why is it that some portion of the "payout computation" is performed manually? Can't it be automated?
Also, how can I see (or estimate) my payout?
Is there a really good place (or book) I can go to read up on and better understand this?
December 11, 2017, 11:44:27 PM
Many of us buy only from the mfrs direct, or from endorsed, official distributors
Would BITMAIN pre-sell one version and then ship a different one?
This is what Eastshore is claiming why they have the different version to ship in the first place.
FWIW, the 2 S9's I ordered for Dec 11-20th batch show Antminer S9-14TH/s in the order status. Granted that doesn't mean anything since I think they claim +/- 5%. This is my first Bitmain order.
December 11, 2017, 11:26:02 PM
Many of us buy only from the mfrs direct, or from endorsed, official distributors
Would BITMAIN pre-sell one version and then ship a different one?
This is what Eastshore is claiming why they have the different version to ship in the first place.
FWIW, the 2 S9's I ordered for Dec 11-20th batch show Antminer S9-14TH/s in the order status. Granted that doesn't mean anything since I think they claim +/- 5%. This is my first Bitmain order.
December 11, 2017, 10:49:20 PM
Many of us buy only from the mfrs direct, or from endorsed, official distributors
Would BITMAIN pre-sell one version and then ship a different one?
This is what Eastshore is claiming why they have the different version to ship in the first place.
December 11, 2017, 10:45:16 PM
No, you're not out of line to complain here. It's how we find out about questionable contacts, etc.
The bad news is that you're SOL, but I think you already understand that. Your experience in this instance is representative of what us "old timers" have learned over the years. Many of us buy only from the mfrs direct, or from endorsed, official distributors (as Canaan has recently moved to). In any other instance with ASICs of any kind, you're doing a crap shoot if you pay in BTC. IMHO.
The bad news is that you're SOL, but I think you already understand that. Your experience in this instance is representative of what us "old timers" have learned over the years. Many of us buy only from the mfrs direct, or from endorsed, official distributors (as Canaan has recently moved to). In any other instance with ASICs of any kind, you're doing a crap shoot if you pay in BTC. IMHO.
Jump to: