KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 675.

Minty_Andy

newbie

Activity: 33

Merit: 0

I'm in a bit of a battle with Eastshore.XYZ over 2x 14TH S9 i paid for back in early november (so 0.689 BTC !)

They have now sent an email to each of the people buying from that batch and have told us that they will be in fact shipping the 13.5 versions.

12 people total.

I know this because they CC'd the whole list of us !
(instead of BCC)

So not only have they shared all our emails around but they are sending machines i bought (through them instead of elsewhere) because it was the 14TH version.

They then said they would refund us the difference.
$60 !!! Angry

I'm really annoyed they are sending a different unit and i've now (in hindsight of course) virtually paid over $10k for the pair of them...

Their return policy is of course that it is non refundable, but they aren't even shipping me the item i purchased.

Am i out-of-line to be upset here?

beltsniffer

sr. member

Activity: 277

Merit: 250

Quote from: PPOC on December 11, 2017, 04:16:45 PM

Getting a couple S9's online, 14TH batch. Any way to adjust the fan speed and Clock anymore? cold basement and chips are 68-71. I'd like to turn fans down for noise and run chips around 88-92. I remember seeing a URL link to still access the fan and clock settings, latest shipped FW does not have those options anymore.

Doing the ip reporter reset will give you access to the fan speed again. It is discussed here https://enforum.bitmain.com/bbs/topics/3957

I have done this reset on a faulty R4 and though it did not fix my isssue it did give back the "customize the fan speed percentage" option.

Waztim

member

Activity: 210

Merit: 15

Quote from: Biffa on December 11, 2017, 05:13:38 PM

Quote from: PPOC on December 11, 2017, 04:16:45 PM

Getting a couple S9's online, 14TH batch. Any way to adjust the fan speed and Clock anymore? cold basement and chips are 68-71. I'd like to turn fans down for noise and run chips around 88-92. I remember seeing a URL link to still access the fan and clock settings, latest shipped FW does not have those options anymore.

http://miner.ip.addr/cgi-bin/minerAdvanced.cgi

That's as good as it gets but not fan speed directly just a small amount of control over the max frequency

How do I use this. Where do I insert that into my S9 SW interface? Your help is much appreciated. Mine On!!

Nevermind!! I asked a stupid question. Not willing to lose 3 hours of mining to play with Freq.

overcon

sr. member

Activity: 393

Merit: 250

911 IT Admin. I keep 911 up so you get help ASAP!

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: jmccall005

I currently mine only with a bitcoin address and can view my stats via

www.kano.is/address.php?a=(BITCOIN ADDRESS). I just do not see any stats of when I have been paid or how often. Is there a detailed page that displays any of this information.

I also apologize if I wasn't supposed to start a new topic to receive this info.

Thanks!

You don't get any stats other than 'current' worker stats, if you mine to an address.
The payout info is your wallet.

If you want more stats then you need to mine to an account.

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote

Well that sucks, I was able to run a quiet 2900-3200 RPM in the past, now these suckers stay at 4250. Don't know if I can take the humming

Ever since batch-16 many moons ago they have been auto-tune with zero user control over how they work... They are industrial miners and were never designed for 'Home or Office" use. Why do people keep forgetting that?

That said, there are several threads in Hardware about building noise reduction enclosures for these.

PPOC

hero member

Activity: 575

Merit: 500

Quote from: Biffa on December 11, 2017, 05:13:38 PM

Quote from: PPOC on December 11, 2017, 04:16:45 PM

Getting a couple S9's online, 14TH batch. Any way to adjust the fan speed and Clock anymore? cold basement and chips are 68-71. I'd like to turn fans down for noise and run chips around 88-92. I remember seeing a URL link to still access the fan and clock settings, latest shipped FW does not have those options anymore.

http://miner.ip.addr/cgi-bin/minerAdvanced.cgi

That's as good as it gets but not fan speed directly just a small amount of control over the max frequency

Well that sucks, I was able to run a quiet 2900-3200 RPM in the past, now these suckers stay at 4250. Don't know if I can take the humming

brad2388

member

Activity: 73

Merit: 10

Quote from: Biffa on December 11, 2017, 05:13:38 PM

Quote from: PPOC on December 11, 2017, 04:16:45 PM

Getting a couple S9's online, 14TH batch. Any way to adjust the fan speed and Clock anymore? cold basement and chips are 68-71. I'd like to turn fans down for noise and run chips around 88-92. I remember seeing a URL link to still access the fan and clock settings, latest shipped FW does not have those options anymore.

http://miner.ip.addr/cgi-bin/minerAdvanced.cgi

That's as good as it gets but not fan speed directly just a small amount of control over the max frequency

When i try that to raise the freq. it says the miner will be offline for 3 hrs.

Has anyone done this?

aideed

newbie

Activity: 53

Merit: 0

doing the block dance at 32,000 feet!

Biffa

legendary

Activity: 3234

Merit: 1221

rifleman74

member

Activity: 658

Merit: 21

4 s9's 2 821's

Time for a block dance. to the left, to the left, to the right, to the right, to the front, to the front, to the back, to the back, now dip baby dip baby dip baby dip.........

Biffa

legendary

Activity: 3234

Merit: 1221

Quote from: PPOC on December 11, 2017, 04:16:45 PM

Getting a couple S9's online, 14TH batch. Any way to adjust the fan speed and Clock anymore? cold basement and chips are 68-71. I'd like to turn fans down for noise and run chips around 88-92. I remember seeing a URL link to still access the fan and clock settings, latest shipped FW does not have those options anymore.

http://miner.ip.addr/cgi-bin/minerAdvanced.cgi

That's as good as it gets but not fan speed directly just a small amount of control over the max frequency

PPOC

hero member

Activity: 575

Merit: 500

Getting a couple S9's online, 14TH batch. Any way to adjust the fan speed and Clock anymore? cold basement and chips are 68-71. I'd like to turn fans down for noise and run chips around 88-92. I remember seeing a URL link to still access the fan and clock settings, latest shipped FW does not have those options anymore.

overcon

sr. member

Activity: 393

Merit: 250

911 IT Admin. I keep 911 up so you get help ASAP!

Quote from: leongb4 on December 11, 2017, 03:32:50 PM

My Blockchain bitcoin wallet changes its address every transaction I guess for security purposes, didn't even realize, since I got my first few payments no problem. I updated my wallet address here in the settings after I realized this, but we had already matured both blocks. Are my payments somehow gone? Or have they not been sent out yet? Sorry for the noob question.

They never leave, it just cycles new ones but the money is tied to your account not the specific address.

2tights

sr. member

Activity: 308

Merit: 251

I like big BITS and I cannot lie.

Quote from: leongb4 on December 11, 2017, 03:32:50 PM

My Blockchain bitcoin wallet changes its address every transaction I guess for security purposes, didn't even realize, since I got my first few payments no problem. I updated my wallet address here in the settings after I realized this, but we had already matured both blocks. Are my payments somehow gone? Or have they not been sent out yet? Sorry for the noob question.

pretty sure you still have access to any addresses that you have on your account

leongb4

newbie

Activity: 1

Merit: 0

My Blockchain bitcoin wallet changes its address every transaction I guess for security purposes, didn't even realize, since I got my first few payments no problem. I updated my wallet address here in the settings after I realized this, but we had already matured both blocks. Are my payments somehow gone? Or have they not been sent out yet? Sorry for the noob question.

luxMiner

jr. member

Activity: 97

Merit: 1

Quote from: noquedaeltiempo on December 11, 2017, 06:24:08 AM

Quote from: Sansaa on December 11, 2017, 05:53:30 AM

Hello I'm pretty new to the Kanopool I have started mining about 4 days ago on the pool with my 2 S9s. I have read that the payment is given after 100 confirmation of finding a block but in the last 2 blocks which was found 1,2 days ago I received the payment before the 100 confirmation and it showed that my average THs was only 2.3 -2.6 I don't understand why it showed such a low THs where as at the time my TH was around 28.
And my average % was showing more than 0.01%, can someone explain this to me?
Block   Block UTC     Miner Reward   N Diff   N Range   Pool N Avg     Your %   Your N Diff   Your N Avg   Your BTC
498508   10/Dec 03:39   17.43860143   7.958T   413hr 27m 45s   22.96PHs   0.01%   901.236M   2.60THs   0.00197478
498476   9/Dec 23:27   14.22993506   7.956T   414hr 20m 6s   22.91PHs   0.01%   801.733M   2.31THs   0.00143390

There is a ramp up period, take a look at the "Your N Avg" every time a new block is found (you can also take a look at your "Shift Graph" in the "Workers" Section when logged in Kano.is) it should get higher as the days pass. Fully ramp up period is about 13-15 days.

Guys, please read the thread, all these questions has been addressed millions of times. I'm a noob myself (about 3 months here at Kano), but people need to start reading the thread and the pool page info to figure these simple things by themselves.

Thread is getting swamped with the same questions over and over and over again and it's getting tiresome.

i don't find the 'thread getting swamped with the same questions' necessarily tiresome. the fact anyone can ask any question without worry of being looked down upon as silly, no matter how noob it may be, adds to the intimate quality of the kano pool community.

Minty_Andy

newbie

Activity: 33

Merit: 0

Quote from: brad2388 on December 11, 2017, 06:30:30 AM

So under my shift workers graph it shows the last 5nd reward in red.
My bar is past the 5nd now. Does that mean im done with the 5nd?

Where is the wiki that addresses each of these questions?

This thread here has obviously grown long and hard to mine for each answer.

I have picked things up from asking myself and seeing these similar questions asked in a variety of ways, but maybe a static wiki we can point new folks to is easier than answering or sending back into the thread?

HSchmirPo

newbie

Activity: 47

Merit: 0

Thanks to smutboy420 and to the Kano community!

smutboy420

full member

Activity: 341

Merit: 100

Quote from: HSchmirPo on December 11, 2017, 09:53:03 AM

So my S9 arrived and is connected to this pool. Cool

It shows firmware: Fri Nov 17 17:37:49 CST 2017
Is this the last firmware?

If its a new one then more then likely yes.. its almost a full year later then mine have for firmware.

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 675. (Read 5352367 times)