MinerEU.com 850USD THunderX3 80 USD Blizzard , 4*Blizzard @ 60 USD each - page 14.

JoostB

sr. member

Activity: 391

Merit: 250

Quote from: VictorBC on June 28, 2014, 12:57:58 PM

I have already received my "Zeus ThunderX3 " and "HuracaneX3" at first seems to be all right. It has arrived well packaged and clean.

I have a problem is that the "ThunderX3" only goes 14Mhs. I connected all the blades. All seem to work, but the "script" of MinerEU just gives me 14MHs

I want to install the script of Zeus. "Zeus Controller". but I copy the image to the SD, but not to do. How to install the image on the "RaspberryPI"?. The Scrip MinerEU I installed with SD Rabian.

I have two "ThunderX3" and the two 14Mhs. Something I'm doing wrong

Any idea?

Images:

http://i62.tinypic.com/nxrodw.jpg
http://i59.tinypic.com/2z50g7b.jpg
http://i61.tinypic.com/2yu0itf.jpg

Forgive my ignorance. THANKS,

You can write the image to SD card under Windows with a program called 'Win32DiskImager'.

http://sourceforge.net/projects/win32diskimager/

emdje

hero member

Activity: 686

Merit: 500

Want to over-clock the device: https://bitcointalksearch.org/topic/overclocking-a2mini-669390

someone any ideas on how to do that?

azadbitcoin

member

Activity: 69

Merit: 10

Hi;

Why has not the product you ordered???
Not that I'm throwing mail very indifferent answer.,

Gridseed G-Blade Scrypt Miner (80 chip) Summer promotion × 1
Order no : 2169

VictorBC

member

Activity: 88

Merit: 10

I have already received my "Zeus ThunderX3 " and "HuracaneX3" at first seems to be all right. It has arrived well packaged and clean.

I have a problem is that the "ThunderX3" only goes 14Mhs. I connected all the blades. All seem to work, but the "script" of MinerEU just gives me 14MHs

I want to install the script of Zeus. "Zeus Controller". but I copy the image to the SD, but not to do. How to install the image on the "RaspberryPI"?. The Scrip MinerEU I installed with SD Rabian.

I have two "ThunderX3" and the two 14Mhs. Something I'm doing wrong

Any idea?

Images:

http://i62.tinypic.com/nxrodw.jpg
http://i59.tinypic.com/2z50g7b.jpg
http://i61.tinypic.com/2yu0itf.jpg

Forgive my ignorance. THANKS,

JPS2K5

full member

Activity: 266

Merit: 100

Quote from: JoostB on June 28, 2014, 04:51:22 AM

Maybe an artifact from manufacturing. It looks as if they are in series with the other 4 resistors that are clean.
Difficult to tell from that picture. Strange is the '0', that would mean 0 Ohm, or just a plain connection.
You have to measure them with a resistance-meter, but in-circuit it can give bogus values.

I'll just wait for Bill.... And he better answer my email.

JoostB

sr. member

Activity: 391

Merit: 250

Maybe an artifact from manufacturing. It looks as if they are in series with the other 4 resistors that are clean.
Difficult to tell from that picture. Strange is the '0', that would mean 0 Ohm, or just a plain connection.
You have to measure them with a resistance-meter, but in-circuit it can give bogus values.

JPS2K5

full member

Activity: 266

Merit: 100

Quote from: Muhammed Zakir on June 28, 2014, 03:52:34 AM

Quote from: JPS2K5 on June 28, 2014, 01:32:44 AM

I can't really understand how they have gone too hot when they are next to the fan. Unless that already happened before the miner got here.

Anyways, no word from Bill yet. I'm trying to give him some time before I explode...

If you kept it in a place where there is less airflow, it might happen. Roll Eyes

Kindly,
Muhammed Zakhir

Hehe... It's right in front of an open window, blowing outside Tongue

I noticed there are 2 rows of these. Both look the same, while on the other board they are clean and you can read a '0' on them.

Muhammed Zakir

hero member

Activity: 560

Merit: 509

I prefer Zakir over Muhammed when mentioning me!

Quote from: JPS2K5 on June 28, 2014, 01:32:44 AM

I can't really understand how they have gone too hot when they are next to the fan. Unless that already happened before the miner got here.

Anyways, no word from Bill yet. I'm trying to give him some time before I explode...

If you kept it in a place where there is less airflow, it might happen. Roll Eyes

Kindly,
Muhammed Zakhir

JPS2K5

full member

Activity: 266

Merit: 100

I can't really understand how they have gone too hot when they are next to the fan. Unless that already happened before the miner got here.

Anyways, no word from Bill yet. I'm trying to give him some time before I explode...

JoostB

sr. member

Activity: 391

Merit: 250

Quote from: JPS2K5 on June 27, 2014, 07:07:21 PM

This is the old board btw... I dont think it's supposed to look like that...

No it doesn't, these resistors clearly have been too hot. It doesn't have to mean that they are broken though.

JPS2K5

full member

Activity: 266

Merit: 100

This is the old board btw... I dont think it's supposed to look like that...

JPS2K5

full member

Activity: 266

Merit: 100

Quote from: james42 on June 27, 2014, 06:40:05 PM

Let me guess the brown one was your replacement?

Mhm....

james42

sr. member

Activity: 434

Merit: 250

Let me guess the brown one was your replacement?

JoostB

sr. member

Activity: 391

Merit: 250

Quote from: JPS2K5 on June 27, 2014, 04:24:56 PM

Quote from: JoostB on June 27, 2014, 04:19:17 PM

Quote from: JPS2K5 on June 27, 2014, 02:18:25 PM

Well, my board arrived..... I will contact 'Bill' first before I decide to post here what happened.... Angry

Doesn't sound good.

I received my refund for the A2Mini, maybe I have to reconsider buying a second one.
A miner with EnSilica chips looks very attractive, but it will probably take too long before it arrives.

Allow me to give you a 'teaser'

http://tinypic.com/view.php?pic=14vlmps&s=8#.U63gdvmVjto

One of the blades from factory A and one from factory B, a different PCB with a different size.
I already noticed that when I had the new A2Mini here for half a day.

JPS2K5

full member

Activity: 266

Merit: 100

Quote from: JoostB on June 27, 2014, 04:19:17 PM

Quote from: JPS2K5 on June 27, 2014, 02:18:25 PM

Well, my board arrived..... I will contact 'Bill' first before I decide to post here what happened.... Angry

Doesn't sound good.

I received my refund for the A2Mini, maybe I have to reconsider buying a second one.
A miner with EnSilica chips looks very attractive, but it will probably take too long before it arrives.

Allow me to give you a 'teaser'

http://tinypic.com/view.php?pic=14vlmps&s=8#.U63gdvmVjto

JoostB

sr. member

Activity: 391

Merit: 250

Quote from: JPS2K5 on June 27, 2014, 02:18:25 PM

Well, my board arrived..... I will contact 'Bill' first before I decide to post here what happened.... Angry

Doesn't sound good.

I received my refund for the A2Mini, maybe I have to reconsider buying a second one.
A miner with EnSilica chips looks very attractive, but it will probably take too long before it arrives.

JPS2K5

full member

Activity: 266

Merit: 100

Well, my board arrived..... I will contact 'Bill' first before I decide to post here what happened.... Angry

xray

sr. member

Activity: 341

Merit: 250

Are you taking paypal yet and update on scrypt miner prices

TCM

sr. member

Activity: 251

Merit: 250

Quote from: minereu.com on June 27, 2014, 07:00:14 AM

You won't believe it, but these mieners has been tested for 5 days in China and that is how dirty they get . really environment . You will know if you visit.
but you got the right point, they should then be cleaned and dusted. shouldn't be like that. no one will like what they bought looks like a second hand .

I have feed this back to them and we are helping them to keep miners clean by improve the testing plant and cleanning facility

Indeed, it's unbelievable. They can assemble all these delicate eletronics dust- and error-free and then test them in the dirtiest sewer they can find? It makes no sense. I'm running my miner in a very dusty environment as well and after 10 days, it still looks rather dust-free.

I don't know whether this is a general business attitude in Asia or just with "western foreigners", but there's always a flair of untrustworthiness and shady explanations going on.

minereu.com

sr. member

Activity: 244

Merit: 250

Quote from: JoostB on June 27, 2014, 04:10:45 AM

Quote from: Rimba on June 27, 2014, 03:39:21 AM

I bought a A2BOX not the mini the big one and it had many issues too but Im in talks with minereu.com.
I think we will solve this out....

I will let you know

My experience is that they will try to help you when there are problems. And they are not doing very difficult about refunds.

The thing I don't like is that sometimes they sell you stuff that clearly has been used in some mining plant and has been damaged for that.
Many of these Chinese factories are mining their asses off with equipment that should go to the customer.
A 24h burn-in test in a clean environment would be good, but 30 days in a coal mine seems not.

You won't believe it, but these mieners has been tested for 5 days in China and that is how dirty they get . really environment . You will know if you visit.
but you got the right point, they should then be cleaned and dusted. shouldn't be like that. no one will like what they bought looks like a second hand .

I have feed this back to them and we are helping them to keep miners clean by improve the testing plant and cleanning facility

Topic: MinerEU.com 850USD THunderX3 80 USD Blizzard , 4*Blizzard @ 60 USD each - page 14. (Read 94956 times)