UPDATE Dashboard v3056
- new vote poll: Which OS app you would like to see first ?
- rig tooltip (under its name) will show now your public ip address which is mostly needed for pools (this will show up after reloading/rebooting rig)
- rig tooltip (under claymore speed) will now hide Dual Mining text if it is not using Dual Mining
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 137. (Read 835818 times)
July 05, 2018, 06:49:35 AM
July 05, 2018, 04:03:37 AM
Feature Request / Idea
Core Volt and MHz depending on Temparature
like Fan control
but if the fan is allready 100% then the Core MHz/Volts should drop
I live in switzerland where temperature can swing between -20 to +30 Degree Celsius
My rig is located in a kind of "outside" Room
nice would be a little matrix eg:
it only have to work, if GPU temp is over target AND fan is allready 100%
Core Volt and MHz depending on Temparature
like Fan control
but if the fan is allready 100% then the Core MHz/Volts should drop
I live in switzerland where temperature can swing between -20 to +30 Degree Celsius
My rig is located in a kind of "outside" Room
nice would be a little matrix eg:
| Label | GPU Temp (Trigger) | Core MHz | Core Volt |
| Ambient20C | 60C | 1300 | 840 |
| Ambient22C | 60C | 1300 | 830 |
| Ambient24C | 60C | 1200 | 820 |
| Ambient26C | 65C | 1200 | 810 |
| Ambient28C | 65C | 1100 | 800 |
| Ambient30C | 65C | 1100 | 800 |
it only have to work, if GPU temp is over target AND fan is allready 100%
July 04, 2018, 08:13:20 PM
So today one of my Riggs on smos went down.
This is what it says.
https://imgur.com/a/wQzao7l
Tried checking risers, reflashing image no luck. Put in a Windows disk everything works great. Any ideas, or just switch this one to Windows too?
This is what it says.
https://imgur.com/a/wQzao7l
Tried checking risers, reflashing image no luck. Put in a Windows disk everything works great. Any ideas, or just switch this one to Windows too?
July 04, 2018, 07:11:04 PM
@tytanick
Why you remove amount of gpu balloon in "Console" column ?
I was checking GPU's on this column as
GPU0,
GPU1,
GPU2
There is no another place for check how many GPU installed on rig.
Now I must count one by one all GPU's
Why you remove amount of gpu balloon in "Console" column ?
I was checking GPU's on this column as
GPU0,
GPU1,
GPU2
There is no another place for check how many GPU installed on rig.
Now I must count one by one all GPU's
July 04, 2018, 03:20:22 PM
Alright old-timers, question for ya! 
Just got my first rig, doing fine so far, trying to mine various algos, successful no real issues.
Rig is (so far) 4 x 1070, 1 x 1060(3g).
Most I have been able to figure out myself.
HOWEVER, I can't get crypto-night heavy to work!!
Anyone have a txt line (with respective miner...id assume ccminer?) I could try?
Coin doesnt matter, its the format I need to pinpoint.
Would really appreciate help from the more experienced.
PS I'm hooked. Just put 50% down on a z9. All I do is research this shit now. #addict
thanks!
tokenz
Just got my first rig, doing fine so far, trying to mine various algos, successful no real issues.
Rig is (so far) 4 x 1070, 1 x 1060(3g).
Most I have been able to figure out myself.
HOWEVER, I can't get crypto-night heavy to work!!
Anyone have a txt line (with respective miner...id assume ccminer?) I could try?
Coin doesnt matter, its the format I need to pinpoint.
Would really appreciate help from the more experienced.
PS I'm hooked. Just put 50% down on a z9. All I do is research this shit now. #addict
thanks!
tokenz
July 04, 2018, 02:48:28 PM
UPDATE v1180:
-fix: OhGodAnETHlargementPill now works also with Titan GPUs
-fix: fixed case when reloading miner after recent start/previous reload caused miner to stop
-info: when you are using old image and miner with Cuda9, you will get warning to upgrade OS image
-info: when miner reloads then it will clear console log and write some info in console
Where can I get v1180? The site only v1176. -fix: OhGodAnETHlargementPill now works also with Titan GPUs
-fix: fixed case when reloading miner after recent start/previous reload caused miner to stop
-info: when you are using old image and miner with Cuda9, you will get warning to upgrade OS image
-info: when miner reloads then it will clear console log and write some info in console
July 04, 2018, 02:43:52 PM
UPDATE new miners
- added miner ewbf-v0.3-cuda8
- added miner ewbf-v0.3-cuda9.1
- added miner z-enemy-v1.12-cuda9.1
- added miner ewbf-v0.3-cuda8
- added miner ewbf-v0.3-cuda9.1
- added miner z-enemy-v1.12-cuda9.1
Does not work any new miner with NVIDIA 1080ti!
Writes an error CUDA9!!!
Persistence mode is already Enabled for GPU 00000000:08:00.0.
Persistence mode is already Enabled for GPU 00000000:09:00.0.
All done.
Applying CoreOffset: 50 MemoryOffset: 50 for GPU 1 with GPU Type: 3
Applying PowerLimit: 220 watt for GPU 1
Applying CoreOffset: 50 MemoryOffset: 50 for GPU 2 with GPU Type: 3
Applying PowerLimit: 220 watt for GPU 2
Applying CoreOffset: 50 MemoryOffset: 50 for GPU 3 with GPU Type: 3
Applying PowerLimit: 220 watt for GPU 3
============ Starting Miner ===============
[ERROR ] 18/07/04 21:52:34 Unable to query number of CUDA devices!
Miner ended/crashed. Restarting miner in 10 seconds --------------
============ Starting Miner ===============
[ERROR ] 18/07/04 21:52:46 Unable to query number of CUDA devices!
Miner ended/crashed. Restarting miner in 10 seconds --------------
July 04, 2018, 10:13:07 AM
UPDATE v1180:
-fix: OhGodAnETHlargementPill now works also with Titan GPUs
-fix: fixed case when reloading miner after recent start/previous reload caused miner to stop
-info: when you are using old image and miner with Cuda9, you will get warning to upgrade OS image
-info: when miner reloads then it will clear console log and write some info in console
-fix: OhGodAnETHlargementPill now works also with Titan GPUs
-fix: fixed case when reloading miner after recent start/previous reload caused miner to stop
-info: when you are using old image and miner with Cuda9, you will get warning to upgrade OS image
-info: when miner reloads then it will clear console log and write some info in console
July 04, 2018, 07:47:45 AM
UPDATE new miners
- added miner ewbf-v0.3-cuda8
- added miner ewbf-v0.3-cuda9.1
- added miner z-enemy-v1.12-cuda9.1
- added miner ewbf-v0.3-cuda8
- added miner ewbf-v0.3-cuda9.1
- added miner z-enemy-v1.12-cuda9.1
July 03, 2018, 11:30:50 PM
adding lolMiner-144.5 v0.38 would be so great
July 03, 2018, 09:52:47 PM
July 03, 2018, 05:52:06 PM
That ETH enlargment not working on my titan xp cards. Would be nice if I can assign it to one machine.
ETH enlargment is wierd stuff. 1080ti mixed rig worked flawlessly, 1080 zotacs did not worked at all. July 03, 2018, 04:06:47 PM
Lyra2REv2 settings for 1070 Amor ?
No one is running 1070s in Lyra2REv2 ? I am looking for the overclock settings
Thanks
you should be able to use +125/+200 as a starting point and work your way towards +200/+600 depending on your specific card
July 03, 2018, 01:12:55 PM
pls add
EWBF Cuda Equihash Miner v0.3
EWBF Cuda Equihash Miner v0.3
July 03, 2018, 06:15:52 AM
That ETH enlargment not working on my titan xp cards. Would be nice if I can assign it to one machine.
tytanick assured me it will be fixed with next update July 03, 2018, 04:00:29 AM
I want to ask if I can adjust nvidia cards (undervolt etc) from simplemining.net. Thanks.
July 02, 2018, 03:34:44 PM
That ETH enlargment not working on my titan xp cards. Would be nice if I can assign it to one machine.
July 02, 2018, 02:48:45 PM
Suggestions will be appreciated. Rig is running very stable with 8 x 570 cards.
...
if you use the same core/mem clocks for all cards, why seperate them?...
If I find increase in the temperature of some cards then I pull the settings a bit lower, that's why I use separate settings.
July 02, 2018, 10:33:45 AM
Is the Global Option | OhGodAnETHlargementPill not working in simplemining.net?
July 02, 2018, 10:06:38 AM
Can I start OhGodAnETHlargementPill any way though SSH? Only for 1 rig.
Jump to: