today some off my rigs are 0 MHS
i looked in the log and
ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
im not mining to NANOPOOL, i tried to change address on config to ethermine or ethermine using SSL, and this persist
ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
i changed to Cryptonight miner,
and this again, using monero miner it tries to connected to nanopool on ETH
ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
10 rigs are in this way
What da fock?
H4ck3d?
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 138. (Read 835515 times)
July 01, 2018, 05:57:12 PM
July 01, 2018, 05:21:29 PM
Looks like it opens a telnet session on your miner. You can use: screen -x miner to keep a running console display of your miner. You can exit that with Ctl-a and while still holding, press d too.
July 01, 2018, 01:38:08 PM
To display local console use: sudo cat /dev/vcs
July 01, 2018, 11:01:25 AM
Can anyone tell how to use this Shellinabox in simplemining in which command what will show?
July 01, 2018, 04:18:27 AM
Did anyone notice that Power settings for MSI nVidia 1080Ti cards is not working properly?
Gaming X and Armor cards should be set up 10-20W more to get the wanted power level.
For example, 1080ti set to 210W to get 180W power level on card.
Gaming X 1070ti are working properly.
But today I've found that 1070 (non TI) drawing 115W power for every setting lower than 115W
Here is for the 80W-115W power level:
ETH:
[INFO] [2018-07-01T10:03:54 02:00] [GPU 0] Speed: 30.28 MH/s Temp: 64C Fan: 30% Power: 115W 0.27 MH/J
Equihash:
[INFO] [2018-07-01T10:15:15 02:00] [GPU 0] Speed: 459.08 Sol/s 241.32 Nonce/s Temp: 65C Fan: 34% Power: 115W 3.99 Sol/J
For higher power it takes what you set, for lower, can't go below 114W-115W
Gaming X and Armor cards should be set up 10-20W more to get the wanted power level.
For example, 1080ti set to 210W to get 180W power level on card.
Gaming X 1070ti are working properly.
But today I've found that 1070 (non TI) drawing 115W power for every setting lower than 115W
Here is for the 80W-115W power level:
ETH:
[INFO] [2018-07-01T10:03:54 02:00] [GPU 0] Speed: 30.28 MH/s Temp: 64C Fan: 30% Power: 115W 0.27 MH/J
Equihash:
[INFO] [2018-07-01T10:15:15 02:00] [GPU 0] Speed: 459.08 Sol/s 241.32 Nonce/s Temp: 65C Fan: 34% Power: 115W 3.99 Sol/J
For higher power it takes what you set, for lower, can't go below 114W-115W
June 30, 2018, 05:50:01 PM
can we please get an update on xmrig miner?
June 30, 2018, 05:00:44 PM
Master!
Please add https://github.com/funakoshi2718/funakoshi-miner/releases
Just to chances of choice between equihash_144/5 miners.
Best regards and good healty!
PS: BTG algo switching will 3 days later
Please add https://github.com/funakoshi2718/funakoshi-miner/releases
Just to chances of choice between equihash_144/5 miners.
Best regards and good healty!
PS: BTG algo switching will 3 days later
June 30, 2018, 02:25:17 PM
Seems ok right now.
June 30, 2018, 01:39:07 PM
CONNECTION PROBLEMS
Hi guys, from 2 hours, there are some global connection problems.
Some of you could get false telegram alerts (10% of rigs are affected ).
Looks like our hosting provider has some problem with internet.
Hi guys, from 2 hours, there are some global connection problems.
Some of you could get false telegram alerts (10% of rigs are affected ).
Looks like our hosting provider has some problem with internet.
On the dash board, about 70% of my rigs are offline -- however hash at poolside seems business as usual.
June 30, 2018, 12:47:32 PM
CONNECTION PROBLEMS
Hi guys, from 2 hours, there are some global connection problems.
Some of you could get false telegram alerts (10% of rigs are affected ).
Looks like our hosting provider has some problem with internet.
EDIT:
The problem was on cloudflare side. Most probably the dns issue.
It last 30 minutes and then 1,5 hour.
10% rigs were affected and you could receive false alerts via telegram.
Hi guys, from 2 hours, there are some global connection problems.
Some of you could get false telegram alerts (10% of rigs are affected ).
EDIT:
The problem was on cloudflare side. Most probably the dns issue.
It last 30 minutes and then 1,5 hour.
10% rigs were affected and you could receive false alerts via telegram.
June 30, 2018, 02:42:21 AM
using SimpleMining OS for 1 year, its very simple. Awesome job dev. 3 months is my biggest uptime
June 30, 2018, 12:26:43 AM
Please add ccminer 2.3 and z-enemy ver1.12, please.
edited
edited
June 30, 2018, 12:18:26 AM
Update v1179
- fixed: case when miner was starting very long
- fixed: logout problem with notice about balance
- fixed: case when miner was starting very long
- fixed: logout problem with notice about balance
please update xmrig-amd
Thank you
June 29, 2018, 06:48:19 PM
Update v1179
- fixed: case when miner was starting very long
- fixed: logout problem with notice about balance
- fixed: case when miner was starting very long
- fixed: logout problem with notice about balance
June 29, 2018, 06:33:20 PM
ccminer 2.3 released for phi2 and so on
https://github.com/tpruvot/ccminer/releases/tag/2.3-tpruvot
btw:
OhGodAnETHlargementPill still not working by default for me at my rig with titan xp´s + 1070´s
only works if i start the pill manually over ssh..
Hi, please write to me email with https://github.com/tpruvot/ccminer/releases/tag/2.3-tpruvot
btw:
OhGodAnETHlargementPill still not working by default for me at my rig with titan xp´s + 1070´s
only works if i start the pill manually over ssh..
subject: ohgodapill forward to tytanick
message: please write me in email (and not here), what is Your email + rig name that has problems.
I would like to check what is going on.
June 29, 2018, 07:35:46 AM
....
** EDIT ** Stupid answer, didn't realize the topic....
dont worry, thats why i did not even want to answer you ** EDIT ** Stupid answer, didn't realize the topic....
June 29, 2018, 03:39:50 AM
ccminer 2.3 released for phi2 and so on
https://github.com/tpruvot/ccminer/releases/tag/2.3-tpruvot
btw:
OhGodAnETHlargementPill still not working by default for me at my rig with titan xp´s + 1070´s
only works if i start the pill manually over ssh..
OhGodAnETHlargementPill is a TSR-like application, you need to run it in the background, before starting your miner software.https://github.com/tpruvot/ccminer/releases/tag/2.3-tpruvot
btw:
OhGodAnETHlargementPill still not working by default for me at my rig with titan xp´s + 1070´s
only works if i start the pill manually over ssh..
Install screen ( apt install screen ) and start a session using
Code:
screen -dmS OhGod OhGodAnETHlargementPill
You should add this line to "/etc/rc.local" to make it run at startup.
** EDIT ** Stupid answer, didn't realize the topic....
June 29, 2018, 01:25:03 AM
ccminer 2.3 released for phi2 and so on
https://github.com/tpruvot/ccminer/releases/tag/2.3-tpruvot
btw:
OhGodAnETHlargementPill still not working by default for me at my rig with titan xp´s + 1070´s
only works if i start the pill manually over ssh..
https://github.com/tpruvot/ccminer/releases/tag/2.3-tpruvot
btw:
OhGodAnETHlargementPill still not working by default for me at my rig with titan xp´s + 1070´s
only works if i start the pill manually over ssh..
June 28, 2018, 08:56:12 PM
Woot! Amazing update, ssh, ethlargement, great work!
June 28, 2018, 05:11:53 PM
Woohoo! OhGodAnETHlargementPill is working for me now. Thanks.
OK good. I will be also working on selecting revA and revB in ohgodapill and also to make it FOR specific groups and not GLOBALLY.Maybe it's better with the button for each rig, so user can simply click and on/off Pill without making a specific group.
Otherwise, I have some problem with one 1080Ti rig and ETH. Rig is working well with other algos, but it looks like does not respond on OC settings (especially power settings).
Smos is fresh, installed yesterday. The symptoms are that core clock running below 1000Mhz and after claymore I've tried bminer which shows that cards are running on ~125W giving ~35Mhs on Ethash.
Any one?
Jump to: