Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 202. (Read 835838 times)
March 02, 2018, 05:34:11 AM
What gets me is all of the one's that keep crying update the miners. Then when he does all the same that where crying, start crying again that there hash rate dropped. And blame SMOS! The drop was because of the new miner wasn't that good!!!! And you cheap ass bastards want alot for a lousy $2.00 a month.
March 02, 2018, 05:14:03 AM
I also don`t understand why they are not updating to latest miners. Ethos lets you update miners yourself any time.
March 02, 2018, 05:11:08 AM
well you could say it was a head to head while I figured things out. the competitor has had the newer miner for a while which is needed for new algo and I'm ready to make the switch, so it looks like I will be going that route.
March 02, 2018, 01:26:17 AM
March 01, 2018, 10:21:51 PM
Hope to Add Shutdown button to the Actions Panel
March 01, 2018, 09:37:53 PM
Is there a way to pause a rig? It seems like it should be really easy, but I can't find any way to do it without powering down the rig.
March 01, 2018, 08:30:11 PM
Just load a Magic Packet application on the laptop. Turn on WOL in the BIOS of the machine you want to wake. Magic packet is sent to MAC address of NIC on the station that needs to be woke up.
March 01, 2018, 06:48:12 PM
Wake On Lan
Does anyone know how we can execute a wake on lan to boot up a pc running simpleOS?
I have 5 rigs and all are set to boot if power is lost but one of my rigs refuses to reboot after a power loss
so i am stuck with trying another option and ran across wake on lan but all the instructions online point to
doing some extra steps inside the os. My rigs are on a remote site and i have a laptop running 24/7 in the same
local network so just wanted to see if i can use that laptop to wake up the rigs that refuse to start.
Does anyone know how we can execute a wake on lan to boot up a pc running simpleOS?
I have 5 rigs and all are set to boot if power is lost but one of my rigs refuses to reboot after a power loss
so i am stuck with trying another option and ran across wake on lan but all the instructions online point to
doing some extra steps inside the os. My rigs are on a remote site and i have a laptop running 24/7 in the same
local network so just wanted to see if i can use that laptop to wake up the rigs that refuse to start.
March 01, 2018, 06:35:23 PM
Hi guys, my first touch with SMOS, but not the first touch to mining.
I am surprised I am finally able to undervolt similar like we use to do so under OverDriveNtool in Windows.
Currently I am running 12x Sapphire Rx470 8GB SAMSUNG, overclocking set to core 1120, mem 2150, undervolt 820, powerstage 3 and Claymore11.1.
Having fantastic score 361Mhps @ 2050W (30+Mh/s; 168W per card).
I was able to run 1260/2200 at 900mV powerstage 5 to fit almost 32Mh/s but each GPU card with riser consume 180W. In this setting I do not have incorrect shares, but there are errors incrementing in hwinfo.
My memory timing:
0:1750
777000000000000022CC1C00CEE55C46C0590E1532CD66090060070014051420FA8900A00300000 012123442C3353C19
0:2000
777000000000000022CC1C00CEE55C46C0590E1532CD66090060070014051420FA8900A00300000 012123442C3353C19
In this SMOS is there any CLI/WEB confirmation or command how to check which frequency is each card running, what exactly voltage is set to core/mem? Just like "show stats" in EthOS.
What else I am able to configure in SMOS under miner user?
Thanks in advance!
I am surprised I am finally able to undervolt similar like we use to do so under OverDriveNtool in Windows.
Currently I am running 12x Sapphire Rx470 8GB SAMSUNG, overclocking set to core 1120, mem 2150, undervolt 820, powerstage 3 and Claymore11.1.
Having fantastic score 361Mhps @ 2050W (30+Mh/s; 168W per card).
I was able to run 1260/2200 at 900mV powerstage 5 to fit almost 32Mh/s but each GPU card with riser consume 180W. In this setting I do not have incorrect shares, but there are errors incrementing in hwinfo.
My memory timing:
0:1750
777000000000000022CC1C00CEE55C46C0590E1532CD66090060070014051420FA8900A00300000 012123442C3353C19
0:2000
777000000000000022CC1C00CEE55C46C0590E1532CD66090060070014051420FA8900A00300000 012123442C3353C19
In this SMOS is there any CLI/WEB confirmation or command how to check which frequency is each card running, what exactly voltage is set to core/mem? Just like "show stats" in EthOS.
What else I am able to configure in SMOS under miner user?
Thanks in advance!
March 01, 2018, 05:16:51 PM
Guys! Please tell me if anyone here managed to get more than 27.7 MHs from ASUS RX 570 rog STRIX. Thanks in advance.
March 01, 2018, 02:33:58 PM
Hello!
Have been using ethOS but have read so many positive things about Simplemining, I really want to check it out.
Following the instructions on the Simplemining website, I used etcher to create a USB of the program and everything worked great.
When I went to one rig and put in the USB and rebooted it - all that would happen is that I would immediately go directly to the MOBO Bios. Couldn't get past that to access the Simplemining program.
Any suggestions you may have would be greatly appreciated. Thank you!
Have been using ethOS but have read so many positive things about Simplemining, I really want to check it out.
Following the instructions on the Simplemining website, I used etcher to create a USB of the program and everything worked great.
When I went to one rig and put in the USB and rebooted it - all that would happen is that I would immediately go directly to the MOBO Bios. Couldn't get past that to access the Simplemining program.
Any suggestions you may have would be greatly appreciated. Thank you!
March 01, 2018, 12:56:36 PM
Same, stability is great.
Here's my config for eth-only nicehash on v11. Should work anywhere.
-epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal YOUR_ADDRESS.$rigName -epsw x -esm 3 -allpools 1 -estale 0
Awsome, thanks @wakiyasi!
March 01, 2018, 11:22:54 AM
is there a way to set temp limit?
March 01, 2018, 10:50:18 AM
hi
yes is ubuntu but you lose control and configure it remotely on the site.
thanks for support
yes is ubuntu but you lose control and configure it remotely on the site.
thanks for support
March 01, 2018, 10:40:08 AM
Is this OS linux based? Can you run ccminer or bfgminer binary if you can compile it okay in Ubuntu 16.0.4?
March 01, 2018, 10:26:47 AM
hi
for simpleminig one miner for neoscrypt with AMd?
sgminer-gm-5.5.5 not work
thanks
for simpleminig one miner for neoscrypt with AMd?
sgminer-gm-5.5.5 not work
thanks
March 01, 2018, 07:40:11 AM
Update v1149
- from now on new miner programm will be downloaded automatically only when first used on rig instead of forcing all rigs to download even when no needed
- added miner claymore-eth-v11.1
- from now on new miner programm will be downloaded automatically only when first used on rig instead of forcing all rigs to download even when no needed
- added miner claymore-eth-v11.1
March 01, 2018, 06:52:13 AM
hello, I have a question,
Will you add the newest ccminer so we can mine most of the new coins that appear?
Will you add the newest ccminer so we can mine most of the new coins that appear?
March 01, 2018, 05:11:21 AM
I tried searching but couldnt find. Probably bad bitcointalk search feature.
Yeah I wish they would add a search through thread option. A lot of questions asked by people have probably already been answered but 99% of people aren't going to search through 400 pages manually.
March 01, 2018, 04:07:40 AM
Hy Umax,
how much RAM do you have?
What processor have you installed?
Did you try to run EthOS on the rigs?
how much RAM do you have?
What processor have you installed?
Did you try to run EthOS on the rigs?
Guys, I need some help as I am troubleshooting this issue for the last few days.
I have 4 x 13 GPUs rigs (GTX 1080Ti on Asrock H110 Pro Btc+ ), but none of them would boot with all cards connected, but as soon as I try disonnecting 1 card and boot boot with 12 cards all rigs can boot and start minining without a problem, stable 24h, no restarts.
I can replicate the same behaviour across all 4 rigs. I can mine on Win10 (dstm and NiceHash), HiveOS with all 13 cards, so risers are fine and I have enough PSU juice (running 4 x 1080Ti on 1400W PSUs).
When booting with 13 cards, every time I get this error http://shrani.si/f/2K/3/36xjpO7K/img8269.jpg
I have tried all different combinations is Bios (Gen 1, Gen 2, disabling all peripherals) to no avail. At the moment I am running with 4 x 12 cards and I made another rig of 4 cards. I would really like to get SMOS going with 13 GPU.
The SMOS is loaded on 32GB Lexar USB3 sticks. Could that have any connections to my problems, should I try running it from SSD?
I have 4 x 13 GPUs rigs (GTX 1080Ti on Asrock H110 Pro Btc+ ), but none of them would boot with all cards connected, but as soon as I try disonnecting 1 card and boot boot with 12 cards all rigs can boot and start minining without a problem, stable 24h, no restarts.
I can replicate the same behaviour across all 4 rigs. I can mine on Win10 (dstm and NiceHash), HiveOS with all 13 cards, so risers are fine and I have enough PSU juice (running 4 x 1080Ti on 1400W PSUs).
When booting with 13 cards, every time I get this error http://shrani.si/f/2K/3/36xjpO7K/img8269.jpg
I have tried all different combinations is Bios (Gen 1, Gen 2, disabling all peripherals) to no avail. At the moment I am running with 4 x 12 cards and I made another rig of 4 cards. I would really like to get SMOS going with 13 GPU.
The SMOS is loaded on 32GB Lexar USB3 sticks. Could that have any connections to my problems, should I try running it from SSD?
I have i3 3.9Ghz cpus and 8GB of ram. I have not tried ethOS, but I switched 3 x 13 gpu rigs to HiveOS yesterday, no problem booting 13 cards. If they will be stable for the next couple of days I might went for that OS, tho I would prefer stay on SMOS.
Jump to: