[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 470.

Ther0byte

newbie

Activity: 5

Merit: 0

Hey tytanik,

can you go a bit deeper on what we can expect in terms of functionality with the grouped rigs ? Does that mean that we will be able to set different rigs in different miners with different oc settings and so on ?

Thanks

zerf2004

newbie

Activity: 24

Merit: 0

Quote from: alred911 on May 08, 2017, 09:13:37 PM

anyone else experimenting this screen during first boot with a pen drive ?

http://imgur.com/a/wi8Jc

then nothing.

thought ?

Turn off 4g decoding in bios.

alred911

member

Activity: 72

Merit: 10

anyone else experimenting this screen during first boot with a pen drive ?

http://imgur.com/a/wi8Jc

then nothing.

thought ?

technokratas

newbie

Activity: 6

Merit: 0

Hi tytanick, just short info:

My problem looks like HW problem (motherboard), so instability is not caused by powerstage settings.

Thank you for your time.

Btw. if you need some help with UI/dashboard coding, i can give you some time;)

Quote from: tytanick on May 04, 2017, 04:35:54 AM

Quote from: technokratas on May 04, 2017, 04:33:39 AM

Hi guys, please can you explain:

1. How Overclocking > Powerstage settings works?
2. What's the default value?
2. Is there possibility to disable this function (if i understand, i can modify voltage control directly in bios)?

My system is unstable even with default settings a i can't figure out where is the problem (i suspect it may be Powerstage settings).

I use Sapphire Nitro+ RX 570 gpu's.

Thank you.

There are two overclocking scripts in RX OS. You can try using old one where Powerstage isnt touched.

Old RX OS script:
Try writing in core: 6
memory: 0
Powerstage: 7 (it will be ignored anyways)

If the first script was stable try those values:

New RX OS script:
core: 1000
memory: 1800
powerstage 6 or 7

Anyway i think that my OC script isnt causing your issue but let me know if this will fix your problem !
There are sooooo many possible problems in crypto mining that i can count

Most common unstability problems:
-Bad riser
-too much OC
-too much undervolting
-wrong timings
-motherboard bios settings problems / firmware problem
-motherboard hardware problem
-PSU problem
-bad eletricity
-bad weather
-bad air
-bad pidgeon shitting on roof or your car
-accually everything.

I had so many problems, that are unlogical !
Even unplugging everything and plugging back on can solve problem Cheesy

or not.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: jotay on May 08, 2017, 05:13:23 PM

Hello tytanick, i am mining ETH/DCR.... i am trying your software today and i have a question for you... why could be the reason that Ethermine report this stats?:

Reported Hashrate: 115.1 Mh/s . - . Current Hashrate 91.4 Mh/s... it is almost 24 Mh/s ... meanwhile the others rigs with direct mining the different is 5-7 Mh/s

thanks

J

I think the question is for pool operators and claymore. I am just putting miner programs available in net into my SMOS

Meaby i dont understand what you asking also

jotay

newbie

Activity: 22

Merit: 0

Hello tytanick, i am mining ETH/DCR.... i am trying your software today and i have a question for you... why could be the reason that Ethermine report this stats?:

Reported Hashrate: 115.1 Mh/s . - . Current Hashrate 91.4 Mh/s... it is almost 24 Mh/s ... meanwhile the others rigs with direct mining the different is 5-7 Mh/s

thanks

J

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: dakky on May 08, 2017, 11:22:50 AM

Hey tytanick, could you add an option to "pause" mining to a dashboard? It would help with troubleshooting. My 2 rigs are working fine, but the third one shuts itself down after 6-7 minutes and all of them have the same hardware configuration.

So just a "disable" option for a certain rig, so if it boots up and stays alive without mining, it's probably GPU related problem.

In future in rig grouping there will be possibility to do those things.

Quote from: clspeter on May 08, 2017, 02:40:27 PM

Using RX470.
With mod bios,power draw dose not change.
even try core 930mv,900mv
nothing changed.
please help
thanks

undervolting in linux works only with custom bios with offset.

About this device for fan controlling, sorry, it wont be welcomed by market.
Mining rigs should be in openframe + if you have too much heat just fan blowers to maximum and thats it.
Nobody cares about fan adjusting speed - it makes no sens, better to set on maximum.
Anyway i cant do this device for you.

clspeter

newbie

Activity: 1

Merit: 0

Using RX470.
With mod bios,power draw dose not change.
even try core 930mv,900mv
nothing changed.
please help
thanks

espressodelisi

full member

Activity: 322

Merit: 100

Quote from: tytanick on May 08, 2017, 04:27:53 AM

Guys, please do some more tests of new dashboard:
https://beta.simplemining.net
Tell me if all buttons works and all things works also

If not, please send me an email to [email protected]
Subject: BETA Dashboard problem

Miner selection list will be reorganized, now it looks like crap - i know this

Hello again.

Should we wait for you to implement individual GPU clock settings?
I can modify the scripts but as you said, I do not want to modify anything.

espressodelisi

full member

Activity: 322

Merit: 100

Quote from: tytanick on May 08, 2017, 09:14:29 AM

Quote from: espressodelisi on May 08, 2017, 07:22:56 AM

Hello tytanick!

I look at the SRR device. it's a nice device to have with the rig.
I have some suggestions for it too.
you made a good resetting device. can you put some fan controlling circuit on it too?
The fans on the GPU's are controlled by software and its ok. But the fans on the rig ara not controlled. Not all the mainboards have fan outputs that can be controlled by software in linux. I need to control the fans of my rig so they do not run fast and noisy when it's not needed.

Maybe you'll make a seperate device named like "Mining Rig Fan Controller". connect it to usb and connect the power from PSU and connect the fans to fan headers on the device and set some parameters on a software that control the device and if there are no signal from software the device runs the fans with the last settings.

Hi, I would need to have 100+ pre orders to do such device and i dont know anybody who would need it Cheesy

What case do you see here - when software (some of the gpus will hang and stop adjusting fan speed on themselves ?)
I guess then the software should react and reboot the rig or something.
I guess there would be totally no demand for such device. Or am i wrong ?

I can not guarrantie you 100 preorders.

I was not talking about the fans on gpu. We can adjust them from the web and its ok.

I was talking about the case fans on the rig.
I have two 12cm fans blowing air to the GPU's and I need a way for the to autoadjust too. if the temps low, they need to run low to make less noise and when the pemps getting higher they start to run faster.
in the daytime, its hot and fans running fast and making a little bit noise is not a big problem with all the daytime city noise outside. in the night, its cool enough to turn the fans slower so they do not make too much noise.
Is not that a good use case?

And sorry, I forgot to thank you for your work. it's good, I am just trying to add ideas to improve the usage.

And another question? I tried to enter the beta site but it asked me to request secure link by email. is it ok? do I lose my previous link?

espressodelisi

full member

Activity: 322

Merit: 100

Quote from: drrobert on May 08, 2017, 11:10:29 AM

Somebody try to flash from ubuntu live or other linux ? Cause atm we need always a windows installation with another drive to flash smos on ssd.

I had to install a windows just for flashing smos.
Windows is too hard for me. it took one day just to install windows.
And installing linux with all the tools I need takes only half an hour with online updates.

We need an image to write from linux.

mafaz

newbie

Activity: 48

Merit: 0

Quote from: tytanick on May 04, 2017, 06:27:52 AM

Lol
I tested Z270-A PRO MSI and i had up and running 6 gpus.
Now i can run only 5 Tongue

I messed with options.
Anybody have this motherboard and can tell what did you changed to work 6 gpus ? Cheesy

Enable 4G Decoding & set PCIe to x1 Wink

[/quote]

SO what else did you change in motherboard bios exactly? I have one with only 3 gpu showing up and windows works for maximum 15 minutes and freezes. Even with simple miner i have no luck for it to work.

dakky

newbie

Activity: 53

Merit: 0

Hey tytanick, could you add an option to "pause" mining to a dashboard? It would help with troubleshooting. My 2 rigs are working fine, but the third one shuts itself down after 6-7 minutes and all of them have the same hardware configuration.

So just a "disable" option for a certain rig, so if it boots up and stays alive without mining, it's probably GPU related problem.

drrobert

full member

Activity: 129

Merit: 100

Somebody try to flash from ubuntu live or other linux ? Cause atm we need always a windows installation with another drive to flash smos on ssd.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: espressodelisi on May 08, 2017, 07:22:56 AM

Hello tytanick!

I look at the SRR device. it's a nice device to have with the rig.
I have some suggestions for it too.
you made a good resetting device. can you put some fan controlling circuit on it too?
The fans on the GPU's are controlled by software and its ok. But the fans on the rig ara not controlled. Not all the mainboards have fan outputs that can be controlled by software in linux. I need to control the fans of my rig so they do not run fast and noisy when it's not needed.

Maybe you'll make a seperate device named like "Mining Rig Fan Controller". connect it to usb and connect the power from PSU and connect the fans to fan headers on the device and set some parameters on a software that control the device and if there are no signal from software the device runs the fans with the last settings.

Hi, I would need to have 100+ pre orders to do such device and i dont know anybody who would need it Cheesy

What case do you see here - when software (some of the gpus will hang and stop adjusting fan speed on themselves ?)
I guess then the software should react and reboot the rig or something.
I guess there would be totally no demand for such device. Or am i wrong ?

espressodelisi

full member

Activity: 322

Merit: 100

Hello tytanick!

I look at the SRR device. it's a nice device to have with the rig.
I have some suggestions for it too.
you made a good resetting device. can you put some fan controlling circuit on it too?
The fans on the GPU's are controlled by software and its ok. But the fans on the rig ara not controlled. Not all the mainboards have fan outputs that can be controlled by software in linux. I need to control the fans of my rig so they do not run fast and noisy when it's not needed.

Maybe you'll make a seperate device named like "Mining Rig Fan Controller". connect it to usb and connect the power from PSU and connect the fans to fan headers on the device and set some parameters on a software that control the device and if there are no signal from software the device runs the fans with the last settings.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Guys, please do some more tests of new dashboard:
https://beta.simplemining.net
Tell me if all buttons works and all things works also

If not, please send me an email to [email protected]
Subject: BETA Dashboard problem

Miner selection list will be reorganized, now it looks like crap - i know this

PcChip

sr. member

Activity: 418

Merit: 250

Quote from: ?? on ??

let me guess, you're adding 0x8D 0x00 0xXX 0x00 to the VoltageObjectInfo init regulator section. What you might not know is that that section is missing on MANY GPUs. What you probably didn't know is that even if it is there, that will only work for MOST GPUs - that is, the ones that have IR3567B-compatible VRM controllers.

would a solution be for him to search for "01 07 0C 00" in the BIOS ROM before applying his "low wattage mode" ?

(and is there even a tool to read this in Linux?)

carloshell

member

Activity: 61

Merit: 10

Hello,

I am using the beta dashboard and suddenly when I click on MORE, there is no menu drop down, nothing is happening. I tried to reload the page, still the problem persists.

Just wanted you guys know.

Issues repeated on:
Windows 10 Google Chrome
RaspberryPI Chromium
Windows 10 Edge

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: Hostels on May 07, 2017, 12:45:14 PM

Guys what is root password?
Need connect via ssh!

Ok thanks, i change it Tongue

root / miner1324
miner/miner

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 470. (Read 835786 times)