Monero Support - page 30. | Bitcointalksearch.org

buy-black

full member

Activity: 238

Merit: 100

I need a little help please.

I sent coins form my wallet to mintpal yesterday and they never showed up. Mintpal wallet is running today but no coins...

This is what my wallet showed when the coins were sent:

Height 232128, transaction , spent 0.600000000000
Height 232128, transaction , spent 0.500000000000
Height 232128, transaction , spent 0.500000000000

I sent it to this address 46aaTzGffy6MmCsY7rQ5CdSAbpPHPj5xkf7yDdfDZSs9YWWEvFhSSkjdr2veqC44q8dt3q1egrLdnZ3 oecB1JSMF856eDwb
and id 4919550fc0dac173fdc003d553441d110980d98de1cdd1cb243b684872ace941

using the command:

transfer 0 46aaTzGffy6MmCsY7rQ5CdSAbpPHPj5xkf7yDdfDZSs9YWWEvFhSSkjdr2veqC44q8dt3q1egrLdnZ3 oecB1JSMF856eDwb 1.6 4919550fc0dac173fdc003d553441d110980d98de1cdd1cb243b684872ace941

I have used that same command in the past without any issues.

Thanks

superresistant

legendary

Activity: 2142

Merit: 1131

Booooooring.

Farthom

newbie

Activity: 14

Merit: 0

Fair enough. I am relieved to know there's a good reason for what happened. I've heard of people using bitcoin accidentally giving away their balance as fees by not sending transactions correctly, and I just wanted to make sure this wouldn't happen when I'm holding 15 XMR and trying to send 1 XMR.

Thanks a lot.

tacotime

legendary

Activity: 1484

Merit: 1005

Quote from: Farthom on September 20, 2014, 06:29:26 PM

I have had an issue regarding Monero TX fees. I had in my wallet, exactly 1.539246463904 XMR, and sent 1.4 XMR to an exchange. The resulting transaction is in the blockchain here:

https://minergate.com/blockchain/mro/transaction/6140829924b68547172fa16069a343632b6f653e8d04fb3b239b9edf55689eb6

Notice the three input transactions correctly total my wallet balance, and the two output transactions total the sent 1.4. What confuses me, is the remainder of my entire balance, turned into the transaction fee, 0.139246463904, leaving me with 0 XMR. I thought the network fee was 0.1 XMR, thus I would have expected one additional output, returning the change back to me.

I'm obviously haven't lost a lot here (0.039246463904 XMR) but I want to make sure I didn't make a mistake, which may result in me losing much more coin next time.

Dust (amounts less than 0.1) are burned off as fees, because they can not contribute to the anonymity set of outputs.

Farthom

newbie

Activity: 14

Merit: 0

I have had an issue regarding Monero TX fees. I had in my wallet, exactly 1.539246463904 XMR, and sent 1.4 XMR to an exchange. The resulting transaction is in the blockchain here:

https://minergate.com/blockchain/mro/transaction/6140829924b68547172fa16069a343632b6f653e8d04fb3b239b9edf55689eb6

Notice the three input transactions correctly total my wallet balance, and the two output transactions total the sent 1.4. What confuses me, is the remainder of my entire balance, turned into the transaction fee, 0.139246463904, leaving me with 0 XMR. I thought the network fee was 0.1 XMR, thus I would have expected one additional output, returning the change back to me.

I'm obviously haven't lost a lot here (0.039246463904 XMR) but I want to make sure I didn't make a mistake, which may result in me losing much more coin next time.

smooth

legendary

Activity: 2968

Merit: 1198

Quote from: puck2 on September 16, 2014, 09:43:30 PM

I can't download the blockchain from the link provided i OP, but when I delete my blockchain.bin file and resync, I end up with repeating errors such as the following:

SYNCHRONIZATION started
2014-Sep-16 19:43:47.427565 [P2P0][107.152.130.98:54232 INC]Sync data returned u
nknown top block: 221011 -> 202659 [18352 blocks (-12 days) ahead]

Can be ignored. Simply means that the identified peer is stuck on the fork from 12 days ago. It won't affect you and the peer will be disconnected soon after.

puck2

full member

Activity: 234

Merit: 105

I can't download the blockchain from the link provided i OP, but when I delete my blockchain.bin file and resync, I end up with repeating errors such as the following:

SYNCHRONIZATION started
2014-Sep-16 19:43:47.427565 [P2P0][107.152.130.98:54232 INC]Sync data returned u
nknown top block: 221011 -> 202659 [18352 blocks (-12 days) ahead]

smooth

legendary

Activity: 2968

Merit: 1198

Quote from: OrientA on September 16, 2014, 04:35:52 AM

Is the 0.8.8.4 version mandatory?

No just recommended. 0.8.8.3+ is mandatory.

OrientA

sr. member

Activity: 462

Merit: 250

Is the 0.8.8.4 version mandatory?

equipoise

hero member

Activity: 794

Merit: 1000

Monero (XMR) - secure, private, untraceable

Quote from: tomerkon on September 15, 2014, 10:14:57 AM

Hi,
I'm trying to transfer XMR from my wallet to an exchange. I try the command: transfer 0 {my-address} {amount} {id}
I get the error: transaction fee is not enough: 0.000001000000, minumim fee: 0.100000000000.
The amount I'm trying to transfer is 0.5 XMR. I'm using versin 0.8.8.3.

What should I do?

thanks

Your fee is too small. Because of a recent attack on the Monero blockchain the fee was changed to 0.1 XMR per transaction. Soon the fee will be changed again to vary depending on the transaction size (in kb) and then your transaction will be cheaper (except if you want to mix your 0.5 XMR with 1000 other transactions). In order to send it with the current fee you should update your wallet and daemon software from here: https://bitcointalksearch.org/topic/xmr-monero-a-secure-private-untraceable-cryptocurrency-583449, but you'll pay 20% fee for the 0.5 XMR transaction.

Quote from: monero on April 24, 2014, 08:38:50 PM

Please upgrade to 0.8.8.3 (fixes 202612 attack)
››› Windows 64-bit • OS X • Linux • Source code ‹‹‹

nioc

legendary

Activity: 1624

Merit: 1008

Also note that the fee will be changed "soon".

It will be determined by the KB size of the transaction not the amount of coins. This will make the fee around 0.01 for most transactions. Sending a transaction composed of many smaller previous transactions will cost more. Again we will find out the details, soon.

OrientA

sr. member

Activity: 462

Merit: 250

Quote from: tomerkon on September 15, 2014, 10:14:57 AM

Hi,
I'm trying to transfer XMR from my wallet to an exchange. I try the command: transfer 0 {my-address} {amount} {id}
I get the error: transaction fee is not enough: 0.000001000000, minumim fee: 0.100000000000.
The amount I'm trying to transfer is 0.5 XMR. I'm using versin 0.8.8.3.

What should I do?

thanks

When I have this problem, I just reduce the amount to be transferred. As the fee is at least 0.1 XMR, it is not worth transferring 0.5 XMR.

tomerkon

newbie

Activity: 2

Merit: 0

Hi,
I'm trying to transfer XMR from my wallet to an exchange. I try the command: transfer 0 {my-address} {amount} {id}
I get the error: transaction fee is not enough: 0.000001000000, minumim fee: 0.100000000000.
The amount I'm trying to transfer is 0.5 XMR. I'm using versin 0.8.8.3.

What should I do?

thanks

J1mb0

hero member

Activity: 983

Merit: 502

Quote from: nioc on September 11, 2014, 04:38:57 AM

You missed the reference to the tides. May I suggest you google it. "Why do the tides go in and out? No one can explain that."
Are you this snarky in real life?

Well I guess if you are not from U.S. it is pretty obscure!

However, it was entertaining viewing - Is that O'Reilly guy Sarah Palin's Old Man? Roll Eyes

nioc

legendary

Activity: 1624

Merit: 1008

Quote from: Spoetnik on September 11, 2014, 12:32:15 AM

Quote from: jwinterm on September 10, 2014, 10:46:25 PM

Quote from: Spoetnik on September 10, 2014, 10:29:46 PM

Why do you guys have so many different support topics and shill accounts here ?

Why do you have maxcoin in your signature? Why do the tides go in and out? No one can explain that.

i have MaxCoin in my sig because i support the coin and the tides go in and out because of the gravitational pull of the moon.
anything else you want to know ?

You missed the reference to the tides. May I suggest you google it. "Why do the tides go in and out? No one can explain that."
Are you this snarky in real life?

carpetbagger

sr. member

Activity: 258

Merit: 250

You can trust me, I have an avatar

Quote from: OrientA on September 11, 2014, 03:26:01 AM

Quote from: Spoetnik on September 11, 2014, 12:32:15 AM

Quote from: jwinterm on September 10, 2014, 10:46:25 PM

Quote from: Spoetnik on September 10, 2014, 10:29:46 PM

Why do you guys have so many different support topics and shill accounts here ?

Why do you have maxcoin in your signature? Why do the tides go in and out? No one can explain that.

i have MaxCoin in my sig because i support the coin and the tides go in and out because of the gravitational pull of the moon.
anything else you want to know ?

Maybe because he also supports XMR.

Nope. XMR hodling has no influence on the tides.

OrientA

sr. member

Activity: 462

Merit: 250

Quote from: Spoetnik on September 11, 2014, 12:32:15 AM

Quote from: jwinterm on September 10, 2014, 10:46:25 PM

Quote from: Spoetnik on September 10, 2014, 10:29:46 PM

Why do you guys have so many different support topics and shill accounts here ?

Why do you have maxcoin in your signature? Why do the tides go in and out? No one can explain that.

i have MaxCoin in my sig because i support the coin and the tides go in and out because of the gravitational pull of the moon.
anything else you want to know ?

Maybe because he also supports XMR.

Spoetnik

legendary

Activity: 1540

Merit: 1011

FUD Philanthropist™

Quote from: jwinterm on September 10, 2014, 10:46:25 PM

Quote from: Spoetnik on September 10, 2014, 10:29:46 PM

Why do you guys have so many different support topics and shill accounts here ?

Why do you have maxcoin in your signature? Why do the tides go in and out? No one can explain that.

i have MaxCoin in my sig because i support the coin and the tides go in and out because of the gravitational pull of the moon.
anything else you want to know ?

Spoetnik

legendary

Activity: 1540

Merit: 1011

FUD Philanthropist™

Quote from: smooth on September 10, 2014, 10:36:34 PM

Quote from: Spoetnik on September 10, 2014, 10:29:46 PM

Why do you guys have so many different support topics and shill accounts here ?

Why do you feel the need to bump every single Monero thread, even ones that are months old?

We thank you for the extra exposure, but it isn't something we really need.

i only read the first couple pages here so your a lying sack of shit Monero cheerleader.

jwinterm

legendary

Activity: 3136

Merit: 1116

Quote from: Spoetnik on September 10, 2014, 10:29:46 PM

Why do you guys have so many different support topics and shill accounts here ?

Why do you have maxcoin in your signature? Why do the tides go in and out? No one can explain that.

Topic: Monero Support - page 30. (Read 82975 times)