Topic: More Epochs mod v1.1 for Claymore ETH miner 15. Epochs 385+ work, New Version! - page 2. (Read 5957 times)

Support for AMD 6x00 series was not planned. Miner supports NVIDIA RTX cards: https://bitcointalksearch.org/topic/m.56545910

Yeah updates to slow is the bigget issue -> no support for amd 6x00 series. Does it support RTX cards?

not planning to do it any time soon, sorry


Do you have any issues with the miner?

Your problem is not devfee

plz add amd 6700 6800 support

Don't forget to update to version 2.5 and get lowest 0.6% devfee in the industry !

New Version just released!


Changelog:

~ Devfee is reduced to lowest in the industry 0.6% ! (it means that every 95 minutes the miner will mine devfee for 35 seconds).

~ Now miner applies straps only once after first DAG generation at start, and doesn't reapply straps again in case of epoch's change during mining to
  increase stability.

cool, looking forward to it

It's hard to announce exact date. I hope to release Nvidia Linux version of the mod in a week or two.

great,thanks for reply. How long until linux version drops?

Hello, not yet. ETC devs changed algo some time ago, so it's not possible to mine ETC same way as ETH as it always been before.
I will try to add ETC support after I'll finish Linux version of the mod.

Hi,
Can I use this miner with RX570-580 4G RAM to mine ETC?
Thx

Yes, I started working on adding support for Linux version of the miner.

linux version?

Thank you very much for your reply, I have Micron and Samsung memory. Strap does not support, I believe you will succeed! ! !

C:\Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0>EthDcrMiner64.exe -epool cn.sparkpool.com:3333 -ewal 0x902a0c04466654967135ca2567a42797dd8c6a3y -eworker A18 -dbg -1 -strap 3
赏屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯突
?               Claymore's Dual GPU Miner - v15.0               ?
?             ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             ?
?                      Supercharged Edition                     ?
韧屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯图
******************************************************************
*                MoreEpochs mod v2.3 by JustAMiner               *
*                    [email protected]                     *
*       https://bitcointalksearch.org/topic/more-epochs-mod-v11-for-claymore-eth-miner-15-epochs-385-work-new-version-5305046        *
******************************************************************

ETH: 1 pool is specified
Main Ethereum pool is cn.sparkpool.com:3333
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 8
CUDA Driver Version/Runtime Version: 11.3/10.0
GPU #0: NVIDIA GeForce GTX 1660, 6144 MB available, 22 compute units, capability: 7.5  (pci bus 1:0:0)
GPU #1: NVIDIA GeForce GTX 1660, 6144 MB available, 22 compute units, capability: 7.5  (pci bus 2:0:0)
GPU #2: NVIDIA GeForce GTX 1660, 6144 MB available, 22 compute units, capability: 7.5  (pci bus 3:0:0)
GPU #3: NVIDIA GeForce GTX 1660, 6144 MB available, 22 compute units, capability: 7.5  (pci bus 4:0:0)
GPU #4: NVIDIA GeForce GTX 1660, 6144 MB available, 22 compute units, capability: 7.5  (pci bus 5:0:0)
GPU #5: NVIDIA GeForce GTX 1660, 6144 MB available, 22 compute units, capability: 7.5  (pci bus 6:0:0)
GPU #6: NVIDIA GeForce GTX 1660, 6144 MB available, 22 compute units, capability: 7.5  (pci bus 8:0:0)
GPU #7: NVIDIA GeForce GTX 1660, 6144 MB available, 22 compute units, capability: 7.5  (pci bus 9:0:0)
Total cards: 8
GPU #0, skip - memory timings tuning is not supported for this hardware
GPU #1, skip - memory timings tuning is not supported for this hardware
GPU #2, skip - memory timings tuning is not supported for this hardware
GPU #3, skip - memory timings tuning is not supported for this hardware
GPU #4, skip - memory timings tuning is not supported for this hardware
GPU #5, skip - memory timings tuning is not supported for this hardware
GPU #6, skip - memory timings tuning is not supported for this hardware
GPU #7, skip - memory timings tuning is not supported for this hardware
ETH: Stratum - connecting to 'cn.sparkpool.com' <203.107.33.230> port 3333 (unsecure)
ETH: Stratum - Connected (cn.sparkpool.com:3333) (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Authorized
Setting DAG epoch #411(4.21GB)...
ETH: 04/29/21-08:28:12 - New job from cn.sparkpool.com:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s

New Version just released!


Changelog:

~ Improved straps apply method for Polaris GPUs. Most issues when miner reports that strap was applied successfully but hash speed doesn't increase are solved. Custom memory timing level that was set in AMD Software (Wattman) doesn't affect straps apply success anymore.

~ Now miner warns if Compute Mode is not enabled for AMD GPUs.

I'm not sure it's possible. All I know about increasing hashrate of 1660 is that if you decrease memory clock, set it like -500 mhz or -502 mhz and if your 1660 has hynix memory you will get speed increase.

Straps are not suitable for GTX1660, can they be added?

New Version just released!


Changelog:

~ Now miner saves AMD Navi GPUs' core clocks/voltages and memory clocks at startup (before applying custom ones with -cclock,-mclock,-cvddc)
  and restores it during exit.

~ Fixed bug that can occur during save/restore of clocks/voltages for AMD Polaris GPUs.

New Version just released!


Changelog:

~ Now miner saves AMD Polaris GPUs' core and memory clocks/voltages at startup (before applying custom ones with -cclock,-mclock,-cvddc,-mvdcc)
  and restores it during exit.

~ Now miner shows AMD driver version at startup and warns if it's not supported.

~ Fixed bug of original miner with applying -cclock values to Navi GPUs on new video drivers.

~ Several minor fixes.