Pages:
Author

Topic: More Epochs mod v1.1 for Claymore ETH miner 15. Epochs 385+ work, New Version! - page 5. (Read 5810 times)

member
Activity: 1196
Merit: 26
New Version just released!

More Epochs mod v1.7 for Claymore Eth Miner v15

Changelog:

~ now miner shows AMD GPUs power draw stats on newer AMD drivers (tested with 20.12.1)

Sounds great, doest it work with straps too? Could you please test with -strap command. will be really nice to use it again.

I'll get Polaris Gpu soon, so I will be able to test straps with newer drivers.
ok thanks. waiting forward
full member
Activity: 1167
Merit: 209
Warning!
This fake software uses a modified library to run it. libcurl.dll, which starts miner (located in MoreEpochs.dll painted and similar to claymore EthDcrMiner64.exe)
It's fake, don't use it
jr. member
Activity: 325
Merit: 2
New Version just released!

More Epochs mod v1.7 for Claymore Eth Miner v15

Changelog:

~ now miner shows AMD GPUs power draw stats on newer AMD drivers (tested with 20.12.1)

Sounds great, doest it work with straps too? Could you please test with -strap command. will be really nice to use it again.

I'll get Polaris Gpu soon, so I will be able to test straps with newer drivers.
jr. member
Activity: 325
Merit: 2
Not working whit older cards like claymore made it work.

3.5 compute is not compatible anymore no point using it if it dont support old cards.

thanks anyways for your try.

Thanks, what older cards do you mean?

Claymore supported 4xx series 6xx 7xxx, like 460 gtx 560 gtx 760 gtx, Radeon 5xxxx 6xxx 7xxxx for mining altcoins and other coins that dont need a big dag file.

it was only miner that supported this old cards.

Why you don´t use claymore for your oldcards? This new version is not needed if you want to mine with your oldcards.

because ETC can be mined whit old cards and claymore isnt updated for that.

Yes, ETC now uses other algo called Etchash. I will see what can be done about that eventually.
jr. member
Activity: 325
Merit: 2
hi
in Iran dev fee doesn't work properly

all miner work good except this miner

DevFee: ETH: Stratum - connecting to 'eu1.ethermine.org' <172.65.207.106> port 5555 (SSL/TLS)
ETH: 02/03/21-14:28:52 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.800 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.815 Mh/s, GPU2 38.772 Mh/s, GPU3 30.420 Mh/s
ETH: 02/03/21-14:28:56 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.858 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.836 Mh/s, GPU2 38.828 Mh/s, GPU3 30.401 Mh/s
ETH: 02/03/21-14:28:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.748 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.806 Mh/s, GPU1 38.773 Mh/s, GPU2 38.751 Mh/s, GPU3 30.419 Mh/s
ETH: 02/03/21-14:28:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.748 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.806 Mh/s, GPU1 38.773 Mh/s, GPU2 38.751 Mh/s, GPU3 30.419 Mh/s
ETH: 02/03/21-14:29:03 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.870 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.783 Mh/s, GPU1 38.834 Mh/s, GPU2 38.818 Mh/s, GPU3 30.435 Mh/s
ETH: 02/03/21-14:29:07 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.793 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.794 Mh/s, GPU2 38.772 Mh/s, GPU3 30.434 Mh/s
ETH: 02/03/21-14:29:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.643 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.784 Mh/s, GPU1 38.764 Mh/s, GPU2 38.726 Mh/s, GPU3 30.370 Mh/s
ETH: 02/03/21-14:29:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.643 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.784 Mh/s, GPU1 38.764 Mh/s, GPU2 38.726 Mh/s, GPU3 30.370 Mh/s
ETH: Stratum - Cannot connect to eu1.ethermine.org:5555
DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...

hi, probably ssl port 5555 is closed by your internet provider. If you are mining to ethermine, original miner would try to use ssl connection to mine
devfee there too. I can change this in next versions of the mod if you won't be able to solve the problem with port 5555 on your side.

did you solve issue with closed 5555 port? I'll release new version soon with workaround.

hello
the government belock most ssl site in iran   we are f***ed

I see, download v1.7 - problem solved.
newbie
Activity: 2
Merit: 0
hi
in Iran dev fee doesn't work properly

all miner work good except this miner

DevFee: ETH: Stratum - connecting to 'eu1.ethermine.org' <172.65.207.106> port 5555 (SSL/TLS)
ETH: 02/03/21-14:28:52 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.800 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.815 Mh/s, GPU2 38.772 Mh/s, GPU3 30.420 Mh/s
ETH: 02/03/21-14:28:56 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.858 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.836 Mh/s, GPU2 38.828 Mh/s, GPU3 30.401 Mh/s
ETH: 02/03/21-14:28:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.748 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.806 Mh/s, GPU1 38.773 Mh/s, GPU2 38.751 Mh/s, GPU3 30.419 Mh/s
ETH: 02/03/21-14:28:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.748 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.806 Mh/s, GPU1 38.773 Mh/s, GPU2 38.751 Mh/s, GPU3 30.419 Mh/s
ETH: 02/03/21-14:29:03 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.870 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.783 Mh/s, GPU1 38.834 Mh/s, GPU2 38.818 Mh/s, GPU3 30.435 Mh/s
ETH: 02/03/21-14:29:07 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.793 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.794 Mh/s, GPU2 38.772 Mh/s, GPU3 30.434 Mh/s
ETH: 02/03/21-14:29:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.643 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.784 Mh/s, GPU1 38.764 Mh/s, GPU2 38.726 Mh/s, GPU3 30.370 Mh/s
ETH: 02/03/21-14:29:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.643 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.784 Mh/s, GPU1 38.764 Mh/s, GPU2 38.726 Mh/s, GPU3 30.370 Mh/s
ETH: Stratum - Cannot connect to eu1.ethermine.org:5555
DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...

hi, probably ssl port 5555 is closed by your internet provider. If you are mining to ethermine, original miner would try to use ssl connection to mine
devfee there too. I can change this in next versions of the mod if you won't be able to solve the problem with port 5555 on your side.

did you solve issue with closed 5555 port? I'll release new version soon with workaround.

hello
the government belock most ssl site in iran   we are f***ed
hero member
Activity: 754
Merit: 500
1xBit the largest casino
Not working whit older cards like claymore made it work.

3.5 compute is not compatible anymore no point using it if it dont support old cards.

thanks anyways for your try.

Thanks, what older cards do you mean?


Claymore supported 4xx series 6xx 7xxx, like 460 gtx 560 gtx 760 gtx, Radeon 5xxxx 6xxx 7xxxx for mining altcoins and other coins that dont need a big dag file.

it was only miner that supported this old cards.

Why you don´t use claymore for your oldcards? This new version is not needed if you want to mine with your oldcards.


because ETC can be mined whit old cards and claymore isnt updated for that.
member
Activity: 1558
Merit: 69
Not working whit older cards like claymore made it work.

3.5 compute is not compatible anymore no point using it if it dont support old cards.

thanks anyways for your try.

Thanks, what older cards do you mean?


Claymore supported 4xx series 6xx 7xxx, like 460 gtx 560 gtx 760 gtx, Radeon 5xxxx 6xxx 7xxxx for mining altcoins and other coins that dont need a big dag file.

it was only miner that supported this old cards.

Why you don´t use claymore for your oldcards? This new version is not needed if you want to mine with your oldcards.
hero member
Activity: 754
Merit: 500
1xBit the largest casino
Not working whit older cards like claymore made it work.

3.5 compute is not compatible anymore no point using it if it dont support old cards.

thanks anyways for your try.

Thanks, what older cards do you mean?


Claymore supported 4xx series 6xx 7xxx, like 460 gtx 560 gtx 760 gtx, Radeon 5xxxx 6xxx 7xxxx for mining altcoins and other coins that dont need a big dag file.

it was only miner that supported this old cards.
member
Activity: 1196
Merit: 26
New Version just released!

More Epochs mod v1.7 for Claymore Eth Miner v15

Changelog:

~ now miner shows AMD GPUs power draw stats on newer AMD drivers (tested with 20.12.1)

Sounds great, doest it work with straps too? Could you please test with -strap command. will be really nice to use it again.
jr. member
Activity: 325
Merit: 2
New Version just released!

More Epochs mod v1.7 for Claymore Eth Miner v15

Changelog:

~ now miner shows AMD GPUs power draw stats on newer AMD drivers (tested with 20.12.1)
jr. member
Activity: 325
Merit: 2
Not working whit older cards like claymore made it work.

3.5 compute is not compatible anymore no point using it if it dont support old cards.

thanks anyways for your try.

Thanks, what older cards do you mean?
jr. member
Activity: 325
Merit: 2
LOLMINER gives nearly full hash 27-28mhs for 4gb on ETH right now. 
Does full tuning by card.

Or you can stay using outdated software with stale share problems and lacking performance.  I get better hash now with LOL/TRM/PM then claymore.  Let it die man.  Your getting what 12mhs or less on 4gb cards.  And 8gb cards you getting stales and crashing on AMD. 

If you are a good dev then step up and write a full miner...if not slink back to the shadows and quit ridding claymores dead software and his coattails.

6+ GB Nvidia GPUs work fine.  8 GB AMD Navi works fine. Polaris 8 GB GPUs will work fine after I'll fix what have to be fixed for supporting of 4+ GB DAG.

4 GB AMD GPUs are not supported. Anyone with 4 GB AMD GPUs should use some other miner.
hero member
Activity: 754
Merit: 500
1xBit the largest casino
Not working whit older cards like claymore made it work.



3.5 compute is not compatible anymore no point using it if it dont support old cards.


thanks anyways for your try.
member
Activity: 1196
Merit: 26
LOLMINER gives nearly full hash 27-28mhs for 4gb on ETH right now. 
Does full tuning by card.

Or you can stay using outdated software with stale share problems and lacking performance.  I get better hash now with LOL/TRM/PM then claymore.  Let it die man.  Your getting what 12mhs or less on 4gb cards.  And 8gb cards you getting stales and crashing on AMD. 

If you are a good dev then step up and write a full miner...if not slink back to the shadows and quit ridding claymores dead software and his coattails.
4g 27-28mhs Huh? how?
full member
Activity: 1264
Merit: 138
LOLMINER gives nearly full hash 27-28mhs for 4gb on ETH right now. 
Does full tuning by card.

Or you can stay using outdated software with stale share problems and lacking performance.  I get better hash now with LOL/TRM/PM then claymore.  Let it die man.  Your getting what 12mhs or less on 4gb cards.  And 8gb cards you getting stales and crashing on AMD. 

If you are a good dev then step up and write a full miner...if not slink back to the shadows and quit ridding claymores dead software and his coattails.
jr. member
Activity: 325
Merit: 2
Hello, Will you have a work in Linux?

Hello, yes. But sadly I can't tell when. Right now I have next roadmap:

1) fix issue with incorrect shares for 8gb AMD Polaris Gpus (470/570/480/580) and Vega.

2) fix crash when applying straps for AMD Gpus.

3) Linux version support.

Current progress:

1) is 85% done, but I need Polaris GPU to test, friend will send me his 570 or 580 to test in 3-4 days.

2) can take a lot of time, will see.

After that I will start adding support for Linux version of the miner. If I'll find more time, I'll start working with Linux version in parallel with other tasks.
newbie
Activity: 14
Merit: 0
Hello, Will you have a work in Linux?
jr. member
Activity: 325
Merit: 2
any indicative hashrate with 4 gb cards  rx 470/570?

If you pair them in a system with a 8GB 470/570 then they will mine but at a reduced hashrate. Best I could get on my 470 4gb cards was 11 MH/s using 1.5

Can you be more specific please. So you are using v1.5 of my mod with several 8gb AMD Gpus and several 4gb AMD Gpu in same rig. And 4gb Gpus are able to mine, but with reduced hashrate. Are you sure that 4gb Gpus actually found shares?
jr. member
Activity: 325
Merit: 2
New Version just released!

More Epochs mod v1.6 for Claymore Eth Miner v15

Changelog:

~ Improved devfee connection handling. Reduced retry delay to 1 second between connection attempts to other devfee pools if miner
   can't connect to default devfee pool when devfee starts. Reduced retry delay to 1 second between connection attempts to other
   devfee pools if miner lost connection to devfee pool during mining devfee.

~ several minor bug fixes and improvements


Pages:
Jump to: