Topic: My 1 gpu now 11gpus 5rigs for Ethereum. 45 days of mining. Photos thoughts. - page 24. (Read 50633 times)
July 11, 2016, 07:46:10 AM
Is anyone running Claymore's dual with eth/sia instead of eth/dcr?
May 26, 2016, 09:40:44 PM
Found that - very easy:
http://highoncoins.com/litecoin-rig/how-to-make-diy-wooden-frame-for-litecoindogecoin-rig/
http://highoncoins.com/litecoin-rig/how-to-make-diy-wooden-frame-for-litecoindogecoin-rig/
if you live in a cooler climate, that's fine..the spacing between the cards will make the temps too high from where i live
July 09, 2016, 06:28:13 AM
from your experience : excluding the confort point , in the end do you earn more with claymore including the dev fees ?
The Claymore is more reliable than other miners. The stratum connection is also very stable. I end up getting more.
May 26, 2016, 09:09:54 PM
Found that - very easy:
http://highoncoins.com/litecoin-rig/how-to-make-diy-wooden-frame-for-litecoindogecoin-rig/
http://highoncoins.com/litecoin-rig/how-to-make-diy-wooden-frame-for-litecoindogecoin-rig/
July 09, 2016, 04:34:49 AM
from your experience : excluding the confort point , in the end do you earn more with claymore including the dev fees ?
May 26, 2016, 09:06:40 PM
anybody using deepcool quanta dq1250? any comments?
http://www.deepcool.com/product/powersupply/2014-02/10_796.shtml
bought a brand new at a huge discount, only 145 $
http://www.deepcool.com/product/powersupply/2014-02/10_796.shtml
bought a brand new at a huge discount, only 145 $
5 year warranty 145 usd seems to be a good deal.
it is two rails 1 is 45amps the other is 65 amps
http://www.deepcool.com/product/powersupply/2014-02/10_796.shtml
click output to see this
AC INPUT VOLTAGE CURRENT FREQUENCY
100-240V 15.0A 47-63Hz
DC OUTPUT +3.3V +5V +12V1 +12V2 -12V +5VSB
CURRENT(Max) 25A 25A 45A 65A 0.8A 4A
OUTPUT(Max) 150W 540W 780W 9.6W 20W
TOTAL OUTPUT 1250W
so proper setup for more then 4 cards may not be possible or at least tricky
i've already gave this a thought, "combining" modular cables in +12V1 (45A) with an adaptor to pcie can still power another one gpu. also i've read in a review that +12V2 can do up to 75A
are you saying that a 1250w PSU can run a 4 GPU setup? of what type of cards? I have a seasonic x-1250 btw
i have r9 390's and 280x's , without undervolting, "stock and overclocking only", how many can i squeeze into a 1250w PSU ideally?
normally i would put 3 280x to a 1250w, i tried 4 280x in a 1250w but it seems like it's stressing the PSU, haven't tried 3 r9 390s there but i think it can run okay.
July 09, 2016, 12:13:37 AM
I'm currently looking at claymore , and everything seems to be available to control heat ! great !
I was using qtminer before because of stratum feature then I stumbled into Claymore v1.... months later v5.
It has a lot of switches and it should address everything you need to tune-up the dual miner, it mines DCR and SIA coins too.
Claymore is also quite responsive in getting new features in - in fact many cool features were from members requests.
Great miner, in my opinion - it runs very well and stable on my 390s, Nanos and 480s.
Have to really thank you for pushing me towards it.
I am hoping to get a total of 5 rx 480s and 2 r9 390's running over the next month all using claymore.
the Dual Miner Manager is also a good utility to manage ALL the rigs in one screen - thats all i monitor nowadays.
May 26, 2016, 09:04:24 PM
it's still profitable if i Buying VGA and start mining eth now ?
Maybe maybe not.
First question is what is your power cost?
Next question is do you have any parts?
July 08, 2016, 11:52:49 PM
Does anyone have stats, or have seen stats, of the RX 480 4GB variety? They're a bit cheaper, if you can find them.
its been going around they are 8gb models with a 4gb sticker.
im guessing the stats would be the same..
Yes big post about it on anantech. You need to unlock it but the ram is on the card.
May 26, 2016, 08:20:43 PM
it's still profitable if i Buying VGA and start mining eth now ?
July 08, 2016, 08:56:28 PM
Does anyone have stats, or have seen stats, of the RX 480 4GB variety? They're a bit cheaper, if you can find them.
its been going around they are 8gb models with a 4gb sticker.
im guessing the stats would be the same..
May 26, 2016, 08:08:48 PM
Guys,
How to build such a frame? Is it hard? Where to buy a parts, bolts etc?
http://www.ebay.com/itm/KADA-6-1-GPU-Mining-Rig-Open-Air-Frame-Case-Chassis-with-6-USB-Risers-Ethereum-/201058353189?hash=item2ed0030025:g:tvwAAOxyhXRTLk2C
Honestly speaking I'm not a very friendly with my hands
How to build such a frame? Is it hard? Where to buy a parts, bolts etc?
http://www.ebay.com/itm/KADA-6-1-GPU-Mining-Rig-Open-Air-Frame-Case-Chassis-with-6-USB-Risers-Ethereum-/201058353189?hash=item2ed0030025:g:tvwAAOxyhXRTLk2C
Honestly speaking I'm not a very friendly with my hands
July 08, 2016, 08:28:18 PM
Does anyone have stats, or have seen stats, of the RX 480 4GB variety? They're a bit cheaper, if you can find them.
May 26, 2016, 07:32:24 PM
Yeah sometimes if you do two restarts the second card loads.
Good luck with the gear.
Good luck with the gear.
Mining on 2x R9 390 now
Each is about 28.99 MHs
I'm using Claymore Dual Miner
July 08, 2016, 04:53:21 PM
I'm currently looking at claymore , and everything seems to be available to control heat ! great !
I was using qtminer before because of stratum feature then I stumbled into Claymore v1.... months later v5.
It has a lot of switches and it should address everything you need to tune-up the dual miner, it mines DCR and SIA coins too.
Claymore is also quite responsive in getting new features in - in fact many cool features were from members requests.
Great miner, in my opinion - it runs very well and stable on my 390s, Nanos and 480s.
Have to really thank you for pushing me towards it.
I am hoping to get a total of 5 rx 480s and 2 r9 390's running over the next month all using claymore.
May 26, 2016, 06:15:01 PM
You only need Xfire if you game with it,not mining,in most cases
You may need to install the drivers for the second card,go to device manager & see if the 2nd card has a driver.
Got it!
Will try
Yeah sometimes if you do two restarts the second card loads.
Good luck with the gear.
July 08, 2016, 03:16:17 PM
I'm currently looking at claymore , and everything seems to be available to control heat ! great !
I was using qtminer before because of stratum feature then I stumbled into Claymore v1.... months later v5.
It has a lot of switches and it should address everything you need to tune-up the dual miner, it mines DCR and SIA coins too.
Claymore is also quite responsive in getting new features in - in fact many cool features were from members requests.
Great miner, in my opinion - it runs very well and stable on my 390s, Nanos and 480s.
May 26, 2016, 04:33:03 PM
You only need Xfire if you game with it,not mining,in most cases
You may need to install the drivers for the second card,go to device manager & see if the 2nd card has a driver.
Got it!
Will try
July 08, 2016, 03:10:31 PM
I'm currently looking at claymore , and everything seems to be available to control heat ! great !
May 26, 2016, 04:27:06 PM
Guys,
To connect second R9 390 should I simply plug it in and connect to PSU power output?
Or do smth with CrossFire?
Thank you!
To connect second R9 390 should I simply plug it in and connect to PSU power output?
Or do smth with CrossFire?
Thank you!
You only need Xfire if you game with it,not mining,in most cases
You may need to install the drivers for the second card,go to device manager & see if the 2nd card has a driver.
Jump to: