Topic: [NRS|NoirShares] POW ENDING at 50k | DACs | MANDATORY WALLET UPDATE 6/23/2014 - page 61. (Read 141638 times)

Quote from: Nrsinv on May 17, 2014, 02:57:21 AM

Thanks for the response, I was able to sync the blockchain but now it shows 0 balance of my coins, they're not even on the stake. I did delete the wallet.dat thinking i needed to replace it with my .dat backup. Is there a way to import it manually since its not showing up? Thanks.

Just replace the wallet.dat with your backup wallet.dat and resync/rescan.

Still nothing, cant believe i messed this up this bad.

Think a bounty is appropiate now due to being a pain in the ass. 100 NRS to whomever does solve this.

To recap, i downloaded new qt, saved a few DATs, (from old and new wallet), coins were staking when i downloaded new qt but the blockchain was stuck for 8 days so i saved another DAT, went to %appdata%/Noirshares folder and deleted everything and replaced it with my old DAT. I tried the old and new wallet.dat and have done the process about 4 times already and the coins do not appear.

Also i may have dumped privkeys on the debug window when i upgraded to new wallet, but i got an error (red letters), so there was no output so i dont think it dumped. But if it did would they go to some file location on my harddrive?

hey I do not want your NRS.

but I try using to help. unfortunately my english is not so good.

1 Please describe once and out the step by step what you did?

2 if you have created a new wallet.dat and the private key imported from the old wallet.dat?

3 are displayed transactions?

4 is your nrs wallet sync?

Dont think the dump privkey transaction went through since i received an error.

I backed up my old and new wallet but erased everything under %appdata% and replaced it with my back up DAT.

I did have the coins in the new wallet but they were staking and the blockchain was stuck on block "24xxx" for 7 or 8 days, thats when i deleted everything from %appdata% and replaced it with old original DAT to sync. Blockchain does fully sync successfully, but my balance is gone, no transaactions, stake coins etc. Just a blank new wallet

Noirshares Upgrade Process
--Step 0 Dump Private Keys
--Step 1 See if blockchain redownload is needed.
Help > Debug Window > Console. In the console type "getblock ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffeeee"
If return is Block not found (code -5) there is no need to re-download the chain proceed to step 5
1a otherwise backup privatekeys type "dumpprivkey " and copy down the output some place safe as this is how you will get your coins back.
1b repeat 1a for each receiving address
--Step 2 Shut down NoirShares, verify not still running in background
--Step 3 If Block found open application data folder for NoirShares
Windows default is %appdata%/NoirShares
Linux default is ~/.NoirShares
Mac OSx default is /Users//Library/Application Support/NoirShares
--Step 4 Delete everything except wallet.dat(unless you dumpedprivkeys in step 1) and (optional)NoirShares.conf
--Step 5 Install new QT, unzip new QT, or build new Qt.
Allow to sync to block height found at http://nrs.argakiig.us
--Step 6 If keys were dumped in step 1
Help > Debug Window > Console type "importprivkey ", Repeat for each private key.
(Note: Qt can appear to hang during import step this is normal as block-chain is being checked for address to update balance with)

(Note: If you want to disable stake generation and keep all of your balance active add "reservebalance=999999999" to your NoirShares.conf file)

Byter88

full member

Activity: 188

Merit: 100

Yeah it's always like that when it first starts up. Sorry I couldn't help you more. Just trying to help. Didn't need the NRS

Thanks for the help, 2am here, gonna keep working on it tomorrow.

Byter88

full member

Activity: 188

Merit: 100

Quote from: wallace512 on May 17, 2014, 02:54:07 AM

Quote from: Byter88 on May 17, 2014, 02:48:10 AM

Quote from: wallace512 on May 17, 2014, 02:23:19 AM

Quote from: Byter88 on May 17, 2014, 02:48:10 AM

Thanks for the response, I was able to sync the blockchain but now it shows 0 balance of my coins, they're not even on the stake. I did delete the wallet.dat thinking i needed to replace it with my .dat backup. Is there a way to import it manually since its not showing up? Thanks.

Just replace the wallet.dat with your backup wallet.dat and resync/rescan.

Still nothing, cant believe i messed this up this bad.

Think a bounty is appropiate now due to being a pain in the ass. 100 NRS to whomever does solve this.

To recap, i downloaded new qt, saved a few DATs, (from old and new wallet), coins were staking when i downloaded new qt but the blockchain was stuck for 8 days so i saved another DAT, went to %appdata%/Noirshares folder and deleted everything and replaced it with my old DAT. I tried the old and new wallet.dat and have done the process about 4 times already and the coins do not appear.

Also i may have dumped privkeys on the debug window when i upgraded to new wallet, but i got an error (red letters), so there was no output so i dont think it dumped. But if it did would they go to some file location on my harddrive?

Since you didn't successfully dumped your private key, keep your original wallet.dat is the most important thing you should do.

after that, go to %APPDATA%\Noirshares\, delete all the files, then copy your original wallet.dat to this folder, open the QT, just waiting the sync complete... then you should get your coins back.

Just make sure your original wallet.dat is correct, Otherwise you will lost all your coins.

Yes i did this, placed the original DAT that i saved from old wallet and synced the blockchain all the way through....What do you mean by making sure its correct? Make sure its the original one? Im using the one that i saved by going to file > backup wallet,

Yes, just make sure the wallet.dat is the original one. this is the key point.
Do you have an old wallet.dat before you did all this things? such as 1 weeks ago? if you did, please use it.

Yes thats the one i used, and the blockchain synced fully but its blank. The DAT is date from April 20th, day i purchased from Polo and sent them to wallet. Think im gonna go through my trash bin and try every DAT file one by one, dont know what else it can be. Ive also deleted and redownloaded the new qt a few times.

wallace512

newbie

Activity: 40

Merit: 0

Yes, I also just want to help, don't need NRS.

Nrsinv

member

Activity: 60

Merit: 10

Yeah it's always like that when it first starts up. Sorry I couldn't help you more. Just trying to help. Didn't need the NRS

wallace512

newbie

Activity: 40

Merit: 0

Quote from: wallace512 on May 17, 2014, 02:23:19 AM

Quote from: Nrsinv on May 17, 2014, 02:36:28 AM

Thanks for the response, I was able to sync the blockchain but now it shows 0 balance of my coins, they're not even on the stake. I did delete the wallet.dat thinking i needed to replace it with my .dat backup. Is there a way to import it manually since its not showing up? Thanks.

Just replace the wallet.dat with your backup wallet.dat and resync/rescan.

Still nothing, cant believe i messed this up this bad.

Think a bounty is appropiate now due to being a pain in the ass. 100 NRS to whomever does solve this.

To recap, i downloaded new qt, saved a few DATs, (from old and new wallet), coins were staking when i downloaded new qt but the blockchain was stuck for 8 days so i saved another DAT, went to %appdata%/Noirshares folder and deleted everything and replaced it with my old DAT. I tried the old and new wallet.dat and have done the process about 4 times already and the coins do not appear.

Also i may have dumped privkeys on the debug window when i upgraded to new wallet, but i got an error (red letters), so there was no output so i dont think it dumped. But if it did would they go to some file location on my harddrive?

Since you didn't successfully dumped your private key, keep your original wallet.dat is the most important thing you should do.

after that, go to %APPDATA%\Noirshares\, delete all the files, then copy your original wallet.dat to this folder, open the QT, just waiting the sync complete... then you should get your coins back.

Just make sure your original wallet.dat is correct, Otherwise you will lost all your coins.

Yes i did this, placed the original DAT that i saved from old wallet and synced the blockchain all the way through....What do you mean by making sure its correct? Make sure its the original one? Im using the one that i saved by going to file > backup wallet,

Yes, just make sure the wallet.dat is the original one. this is the key point.
Do you have an old wallet.dat before you did all this things? such as 1 weeks ago? if you did, please use it.

Byter88

full member

Activity: 188

Merit: 100

Quote from: wallace512 on May 17, 2014, 02:23:19 AM

Quote from: wallace512 on May 17, 2014, 02:23:19 AM

Thanks for the response, I was able to sync the blockchain but now it shows 0 balance of my coins, they're not even on the stake. I did delete the wallet.dat thinking i needed to replace it with my .dat backup. Is there a way to import it manually since its not showing up? Thanks.

Just replace the wallet.dat with your backup wallet.dat and resync/rescan.

Still nothing, cant believe i messed this up this bad.

Think a bounty is appropiate now due to being a pain in the ass. 100 NRS to whomever does solve this.

To recap, i downloaded new qt, saved a few DATs, (from old and new wallet), coins were staking when i downloaded new qt but the blockchain was stuck for 8 days so i saved another DAT, went to %appdata%/Noirshares folder and deleted everything and replaced it with my old DAT. I tried the old and new wallet.dat and have done the process about 4 times already and the coins do not appear.

Also i may have dumped privkeys on the debug window when i upgraded to new wallet, but i got an error (red letters), so there was no output so i dont think it dumped. But if it did would they go to some file location on my harddrive?

Since you didn't successfully dumped your private key, keep your original wallet.dat is the most important thing you should do.

after that, go to %APPDATA%\Noirshares\, delete all the files, then copy your original wallet.dat to this folder, open the QT, just waiting the sync complete... then you should get your coins back.

Just make sure your original wallet.dat is correct, Otherwise you will lost all your coins.

1. I installed a new wallet on another machine
2. Took my wallet backup and dropped the wallet.dat file into the new installation before opening the client for the first time
3. Opened the wallet and unlocked (not sure if the is necessary or not)
4. Started to load transactions, sync, transactions were there !!

Found this at noir talk

Initially i had the wallet encrypted and locked, but once i erased the appdata files it came back without encryption and unlocked Undecided

Byter88

full member

Activity: 188

Merit: 100

Quote from: Mario241077 on May 17, 2014, 02:25:39 AM

Thanks for the response, I was able to sync the blockchain but now it shows 0 balance of my coins, they're not even on the stake. I did delete the wallet.dat thinking i needed to replace it with my .dat backup. Is there a way to import it manually since its not showing up? Thanks.

Just replace the wallet.dat with your backup wallet.dat and resync/rescan.

Still nothing, cant believe i messed this up this bad.

Think a bounty is appropiate now due to being a pain in the ass. 100 NRS to whomever does solve this.

To recap, i downloaded new qt, saved a few DATs, (from old and new wallet), coins were staking when i downloaded new qt but the blockchain was stuck for 8 days so i saved another DAT, went to %appdata%/Noirshares folder and deleted everything and replaced it with my old DAT. I tried the old and new wallet.dat and have done the process about 4 times already and the coins do not appear.

Also i may have dumped privkeys on the debug window when i upgraded to new wallet, but i got an error (red letters), so there was no output so i dont think it dumped. But if it did would they go to some file location on my harddrive?

Since you didn't successfully dumped your private key, keep your original wallet.dat is the most important thing you should do.

after that, go to %APPDATA%\Noirshares\, delete all the files, then copy your original wallet.dat to this folder, open the QT, just waiting the sync complete... then you should get your coins back.

Just make sure your original wallet.dat is correct, Otherwise you will lost all your coins.

Yes i did this, placed the original DAT that i saved from old wallet and synced the blockchain all the way through....What do you mean by making sure its correct? Make sure its the original one? Im using the one that i saved by going to file > backup wallet,

Byter88

full member

Activity: 188

Merit: 100

Quote from: wallace512 on May 17, 2014, 02:23:19 AM

Thanks for the response, I was able to sync the blockchain but now it shows 0 balance of my coins, they're not even on the stake. I did delete the wallet.dat thinking i needed to replace it with my .dat backup. Is there a way to import it manually since its not showing up? Thanks.

Just replace the wallet.dat with your backup wallet.dat and resync/rescan.

Still nothing, cant believe i messed this up this bad.

Think a bounty is appropiate now due to being a pain in the ass. 100 NRS to whomever does solve this.

To recap, i downloaded new qt, saved a few DATs, (from old and new wallet), coins were staking when i downloaded new qt but the blockchain was stuck for 8 days so i saved another DAT, went to %appdata%/Noirshares folder and deleted everything and replaced it with my old DAT. I tried the old and new wallet.dat and have done the process about 4 times already and the coins do not appear.

Also i may have dumped privkeys on the debug window when i upgraded to new wallet, but i got an error (red letters), so there was no output so i dont think it dumped. But if it did would they go to some file location on my harddrive?

hey I do not want your NRS.

but I try using to help. unfortunately my english is not so good.

1 Please describe once and out the step by step what you did?

2 if you have created a new wallet.dat and the private key imported from the old wallet.dat?

3 are displayed transactions?

4 is your nrs wallet sync?

Dont think the dump privkey transaction went through since i received an error.

I backed up my old and new wallet but erased everything under %appdata% and replaced it with my back up DAT.

I did have the coins in the new wallet but they were staking and the blockchain was stuck on block "24xxx" for 7 or 8 days, thats when i deleted everything from %appdata% and replaced it with old original DAT to sync. Blockchain does fully sync successfully, but my balance is gone, no transaactions, stake coins etc. Just a blank new wallet

Nrsinv

member

Activity: 60

Merit: 10

Thanks for the response, I was able to sync the blockchain but now it shows 0 balance of my coins, they're not even on the stake. I did delete the wallet.dat thinking i needed to replace it with my .dat backup. Is there a way to import it manually since its not showing up? Thanks.

Just replace the wallet.dat with your backup wallet.dat and resync/rescan.

Still nothing, cant believe i messed this up this bad.

Think a bounty is appropiate now due to being a pain in the ass. 100 NRS to whomever does solve this.

To recap, i downloaded new qt, saved a few DATs, (from old and new wallet), coins were staking when i downloaded new qt but the blockchain was stuck for 8 days so i saved another DAT, went to %appdata%/Noirshares folder and deleted everything and replaced it with my old DAT. I tried the old and new wallet.dat and have done the process about 4 times already and the coins do not appear.

Also i may have dumped privkeys on the debug window when i upgraded to new wallet, but i got an error (red letters), so there was no output so i dont think it dumped. But if it did would they go to some file location on my harddrive?

Since you didn't successfully dumped your private key, keep your original wallet.dat is the most important thing you should do.

after that, go to %APPDATA%\Noirshares\, delete all the files, then copy your original wallet.dat to this folder, open the QT, just waiting the sync complete... then you should get your coins back.

Just make sure your original wallet.dat is correct, Otherwise you will lost all your coins.

1. I installed a new wallet on another machine
2. Took my wallet backup and dropped the wallet.dat file into the new installation before opening the client for the first time
3. Opened the wallet and unlocked (not sure if the is necessary or not)
4. Started to load transactions, sync, transactions were there !!

Found this at noir talk

Mario241077

legendary

Activity: 1302

Merit: 1000

ORB has a good chance to grow.

Thanks for the response, I was able to sync the blockchain but now it shows 0 balance of my coins, they're not even on the stake. I did delete the wallet.dat thinking i needed to replace it with my .dat backup. Is there a way to import it manually since its not showing up? Thanks.

Just replace the wallet.dat with your backup wallet.dat and resync/rescan.

Still nothing, cant believe i messed this up this bad.

Think a bounty is appropiate now due to being a pain in the ass. 100 NRS to whomever does solve this.

To recap, i downloaded new qt, saved a few DATs, (from old and new wallet), coins were staking when i downloaded new qt but the blockchain was stuck for 8 days so i saved another DAT, went to %appdata%/Noirshares folder and deleted everything and replaced it with my old DAT. I tried the old and new wallet.dat and have done the process about 4 times already and the coins do not appear.

Also i may have dumped privkeys on the debug window when i upgraded to new wallet, but i got an error (red letters), so there was no output so i dont think it dumped. But if it did would they go to some file location on my harddrive?

hey I do not want your NRS.

but I try using to help. unfortunately my english is not so good.

1 Please describe once and out the step by step what you did?

2 if you have created a new wallet.dat and the private key imported from the old wallet.dat?

3 are displayed transactions?

4 is your nrs wallet sync?

wallace512

newbie

Activity: 40

Merit: 0

Thanks for the response, I was able to sync the blockchain but now it shows 0 balance of my coins, they're not even on the stake. I did delete the wallet.dat thinking i needed to replace it with my .dat backup. Is there a way to import it manually since its not showing up? Thanks.

Just replace the wallet.dat with your backup wallet.dat and resync/rescan.

Still nothing, cant believe i messed this up this bad.

Think a bounty is appropiate now due to being a pain in the ass. 100 NRS to whomever does solve this.

To recap, i downloaded new qt, saved a few DATs, (from old and new wallet), coins were staking when i downloaded new qt but the blockchain was stuck for 8 days so i saved another DAT, went to %appdata%/Noirshares folder and deleted everything and replaced it with my old DAT. I tried the old and new wallet.dat and have done the process about 4 times already and the coins do not appear.

Also i may have dumped privkeys on the debug window when i upgraded to new wallet, but i got an error (red letters), so there was no output so i dont think it dumped. But if it did would they go to some file location on my harddrive?

Since you didn't successfully dumped your private key, keep your original wallet.dat is the most important thing you should do.

after that, go to %APPDATA%\Noirshares\, delete all the files, then copy your original wallet.dat to this folder, open the QT, just waiting the sync complete... then you should get your coins back.

Just make sure your original wallet.dat is correct, Otherwise you will lost all your coins.

Byter88

full member

Activity: 188

Merit: 100