Official BITMINE CoinCraft series 28nm ASIC miners thread - page 43.

Airwhale

full member

Activity: 221

Merit: 100

Quote from: stevebrowne on June 20, 2014, 11:31:33 AM

They are still there. I have had contact. No BTC refund mind you.

How did you get in contact? This week, I've sent three emails, and been on hold for 5 hours. They have not picked up a phone nor written back. Should I book a flight to europe? Write a letter via postal service?

Seriously, please tell me. I have an issue that needs to be dealt with ASAP, and I'm sick of losing sleep to listen to their hold music every night.

Helium7878

newbie

Activity: 23

Merit: 0

Quote from: giorgiotheclown on June 20, 2014, 06:51:47 AM

http://i58.tinypic.com/ke6fjm.png

Giorgio, what about those of us who can't go and visit? You don't even bother picking up the phone or answering emails. You are making the situation worse by not communicating.

You say we are handling it all wrong, but we've tried other ways:

Call - no response
Email - no response
Wait for days you say we'll be refunded - Nothing

Understand that you are f**king with peoples families when you keep money that doesn't belong to you. If you get called a few names, that is nothing in comparison. How would you react if someone did this to you? I bet you wouldn't be calm for this long.

What you're doing is far worse than name calling. 6k may not be a lot to you, but we have very little money, and I know other folks here are in the same situation. We need that money, give it back.

stevebrowne

full member

Activity: 128

Merit: 100

They are still there. I have had contact. No BTC refund mind you.

giorgiotheclown

full member

Activity: 168

Merit: 100

Quote from: HardwareReviewer on June 20, 2014, 03:36:45 AM

Quote from: stevebrowne on June 20, 2014, 01:21:57 AM

I can tell you for a fact that when I go and visit, I will most definitely NOT be telling him the date and time of my arrival.

I'm patient.

You "may" have lost money. Also funny

best part.

jseppeli

sr. member

Activity: 430

Merit: 500

Quote from: mangza on June 19, 2014, 02:37:44 PM

yes first time

open up the unit and check that everything is connected properly
most likely some cable or the backpanel is loos

HardwareReviewer

sr. member

Activity: 255

Merit: 250

Quote from: stevebrowne on June 20, 2014, 01:21:57 AM

I can tell you for a fact that when I go and visit, I will most definitely NOT be telling him the date and time of my arrival.

I'm patient.

You "may" have lost money. Also funny

HardwareReviewer

sr. member

Activity: 255

Merit: 250

Quote from: stevebrowne on June 20, 2014, 01:21:57 AM

I can tell you for a fact that when I go and visit, I will most definitely NOT be telling him the date and time of my arrival.

I'm patient.

Hehe greedy bastard

RoboRob67

newbie

Activity: 42

Merit: 0

Quote from: zulover on June 19, 2014, 06:00:34 PM

any one had any problems where the coindeska lcd screen is reading out 10024ghs and on the btcguild website it reads out 670ghs or 540ghs or 339ghs, is it the machines or the pool??? most confusing readindgs

I don't have the issue, I've setup 3 workers per desk and they all running at about 340 GH/s in average.

RoboRob67

newbie

Activity: 42

Merit: 0

Quote from: mangza on June 19, 2014, 11:07:26 AM

what a Problem ?
how to fix

http://i.imgur.com/ojH6ac9.png

Settings->Network->Save and Reboot

stevebrowne

full member

Activity: 128

Merit: 100

I can tell you for a fact that when I go and visit, I will most definitely NOT be telling him the date and time of my arrival.

I'm patient.

Zelek Uther

hero member

Activity: 700

Merit: 504

Run a Bitcoin node.

Quote from: Soros Shorts on June 19, 2014, 10:15:35 PM

Quote from: Zelek Uther on June 19, 2014, 09:25:00 PM

Quote from: Bogart on June 19, 2014, 07:07:52 PM

This was on one of my CoinCraft Desk modules, which draws around 200W.

Replacing the connectors was a pain in the butt. It took me about 4 hours from start to finish.

Whoa! Has anyone else had an issue with pci-e connectors on Coincraft Desks?
Should we be replacing the stock ones with better ones? What is recommended?

I had to open up one Desk unit at the DC because some cards stopped hashing. It turned out that the ribbon cable that runs on top of the cards was loose on a couple of the cards and just needed to be pushed down. I also noticed that the PCI-e connector on one of the hashing cards was very warm to the touch. I sprayed contact cleaner into the pins, replugged the connector and it seemed to help cool it down. That was 2 weeks ago and the DC guy has not yet called me about burning smells coming from my rack.

Is this at standard speeds, ie no over-clocking?

Soros Shorts

donator

Activity: 1617

Merit: 1012

Quote from: Zelek Uther on June 19, 2014, 09:25:00 PM

Quote from: Bogart on June 19, 2014, 07:07:52 PM

This was on one of my CoinCraft Desk modules, which draws around 200W.

Replacing the connectors was a pain in the butt. It took me about 4 hours from start to finish.

Whoa! Has anyone else had an issue with pci-e connectors on Coincraft Desks?
Should we be replacing the stock ones with better ones? What is recommended?

I had to open up one Desk unit at the DC because some cards stopped hashing. It turned out that the ribbon cable that runs on top of the cards was loose on a couple of the cards and just needed to be pushed down. I also noticed that the PCI-e connector on one of the hashing cards was very warm to the touch. I sprayed contact cleaner into the pins, replugged the connector and it seemed to help cool it down. That was 2 weeks ago and the DC guy has not yet called me about burning smells coming from my rack.

tracyhh

member

Activity: 100

Merit: 10

Quote from: mangza on June 19, 2014, 11:07:26 AM

what a Problem ?
how to fix

I have faced the same problem..probably:
pre:change your model from power save model to turbo light model on your webinterface.check if it works.
1. check your PSU camble on your hash modules side, make sure plugged ok
2.check your PSU camble on your PSU side,make sure plugged ok
3.check the backplane on all hash modules, make sure plugged ok
4. check the connector for connect backplane to RPi on board, ake sure plugged ok
5.check the connector for connect backplane to hash modules..make sure it does not broken..
6. check your PSU,make sure it does not broken, you change a new one to check..

otherwise, your hash modules broken ...maybe you have to ship back to BITMINE to replace just like me

giorgiotheclown

full member

Activity: 168

Merit: 100

Quote from: Dino50 on June 19, 2014, 09:10:25 PM

Hello guys!

Im waiting for my refund for 36 days now. They dont pick up the phone. Same issue as yours.

Wtf is going on? Bitmine.ch has gone bankrupt? Since 7th of May no update on webpage. No new product no nothing from what at least they pay back the clients.

Version 1: they have liquidation problems. Paying 2-3 ppl from the bitcoin mining daily with our machines.

Version 2: they save out our paid money from the company and thats why their phone-administrators are told to hold us by calling them next day next week bla bla bla. Or the latest they dont even pick up the phone. Who has proof that the company still exists in Camorino??

Its obviously a f*****ing big scam from the beginning because I cannot believe myself that the machines could have not delivered everybody so far. They financed their mining farm with our btc and wire transfer. Then the lucky guys and girls have received the products or refunds just so they show that they fulfill the clients. Fu***ing disgusting and unbelievable that in 2014 a company are doing this with the clients. Bitmine's boss favourite movie is the wolf of wall street I guess that how to scam the people but who the f**k cares. Disgusting!!!!!!!!!!!!!!!

Where is my hard earned money? Prove that your company still exists!!!

Im thinking about visiting them personally...

I

hmm wait a second,

some people wrote that giorgio is mining with the hardware of his customers with a eligius link.

some people wrote that giorgio is moving a large ammount of bitcoins in his wallets.

some people never received hardware or a refund.

http://www.youtube.com/watch?v=6bpubhZbewE

pretty wild income for 1 TH per Month 1.13701957 BTC $681.58 - power - 6k for giorgio = giorgios new ferrari

Zelek Uther

hero member

Activity: 700

Merit: 504

Run a Bitcoin node.

Quote from: Bogart on June 19, 2014, 07:07:52 PM

This was on one of my CoinCraft Desk modules, which draws around 200W.

Replacing the connectors was a pain in the butt. It took me about 4 hours from start to finish.

Whoa! Has anyone else had an issue with pci-e connectors on Coincraft Desks?
Should we be replacing the stock ones with better ones? What is recommended?

Dino50

newbie

Activity: 42

Merit: 0

Hello guys!

Im waiting for my refund for 36 days now. They dont pick up the phone. Same issue as yours.

Wtf is going on? Bitmine.ch has gone bankrupt? Since 7th of May no update on webpage. No new product no nothing from what at least they pay back the clients.

Version 1: they have liquidation problems. Paying 2-3 ppl from the bitcoin mining daily with our machines.

Version 2: they save out our paid money from the company and thats why their phone-administrators are told to hold us by calling them next day next week bla bla bla. Or the latest they dont even pick up the phone. Who has proof that the company still exists in Camorino??

Its obviously a f*****ing big scam from the beginning because I cannot believe myself that the machines could have not delivered everybody so far. They financed their mining farm with our btc and wire transfer. Then the lucky guys and girls have received the products or refunds just so they show that they fulfill the clients. Fu***ing disgusting and unbelievable that in 2014 a company are doing this with the clients. Bitmine's boss favourite movie is the wolf of wall street I guess that how to scam the people but who the f**k cares. Disgusting!!!!!!!!!!!!!!!

Where is my hard earned money? Prove that your company still exists!!!

Im thinking about visiting them personally...

I

matt4054

legendary

Activity: 1946

Merit: 1035

Quote from: zulover on June 19, 2014, 06:00:34 PM

any one had any problems where the coindeska lcd screen is reading out 10024ghs and on the btcguild website it reads out 670ghs or 540ghs or 339ghs, is it the machines or the pool??? most confusing readindgs

What are your voltage / overclocking settings?

I had problems with one module with the factory settings, had to set to "medium turbo" in order to reach ~680 GHS with 3 modules.

zulover

hero member

Activity: 583

Merit: 500

any one had any problems where the coindeska lcd screen is reading out 10024ghs and on the btcguild website it reads out 670ghs or 540ghs or 339ghs, is it the machines or the pool??? most confusing readindgs

mangza

newbie

Activity: 25

Merit: 0

how to fix it
http://i.imgur.com/1maPqRK.png
http://i.imgur.com/zTj0oXa.png

mangza

newbie

Activity: 25

Merit: 0

yes first time

Topic: Official BITMINE CoinCraft series 28nm ASIC miners thread - page 43. (Read 565248 times)