Hey guys,
Just so you know, I received my miners 3 days ago, and have been trying to hash ever since. I think it may be a backplane PCB board issue, or a power issue. I doubt its the raspberry pi board or the Serial cable board underneath.
They do hash, and they are legit.
I may have a power issue, not allowing me to run more than 2 boards/3boards at a time. Also, I don't trust the backplane design into ARM but that's personal preference... But they are real miners...Heres my ghetto RIG setup.
http://s935.photobucket.com/user/Casiriah_Mine/media/0330142307_zps0b876226.jpg.html
Topic: Official Thread: AMT - page 52. (Read 678353 times)
How long was the stated lead time on DIY Kits?
2-3 days or sooner? is what I thought I read, has that changed?
2-3 days or sooner? is what I thought I read, has that changed?
Looks like the mods took down one of my recent posts. This is the first time I've ever had to repost a post that was deleted, for it is very relevant to this thread.
Let's play "Let's compare posts!"
Yes there has been an issue with the boards BUT WE'VE fixed the problem and everything will go as planned. . Yes FOR THE LAST 2 WEEKS we've been shipping to clients which have agreed there are potential issues and want to receive their miners anyway. Total we've shipped 146 miners. Those orders are scattered between the 500's and 1100's. So when we said we're shipping, we are. We just didn't want to ship something we're not sure in to everyone.
We've shipped up to the 1200's - a few hundred thus far, earlier batches when clients agreed to take the risk and receive their miner despite heat/pcb problems.
For those not good with math, 146 < "A few hundred."
Unless, of course, AMT pulled a rabbit outta their ass and shipped out a couple hundred in only 4 days.
Let's play "Let's compare posts!"
Yes there has been an issue with the boards BUT WE'VE fixed the problem and everything will go as planned. . Yes FOR THE LAST 2 WEEKS we've been shipping to clients which have agreed there are potential issues and want to receive their miners anyway. Total we've shipped 146 miners. Those orders are scattered between the 500's and 1100's. So when we said we're shipping, we are. We just didn't want to ship something we're not sure in to everyone.
We've shipped up to the 1200's - a few hundred thus far, earlier batches when clients agreed to take the risk and receive their miner despite heat/pcb problems.
For those not good with math, 146 < "A few hundred."
Unless, of course, AMT pulled a rabbit outta their ass and shipped out a couple hundred in only 4 days.
Joshua Zipkin... you want me to stop telling people the truth about AMT? Do you want me to let you continue stealing peoples money?
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. zipkin lied about saying he was going to ship my miner as "punishment" for calling him out on this website and amazon.com
12. they lied about the wattage
13. josh said he was starting his "own forum"... just another lie.
14. they lied about saying they would hire someone to answer/help with phone calls and emails.
15. i think i can safely say AMT has lied about their MPP. They have shown no willingness to make up for late delivery and subsequent difficulty increases.
16. josh lied about "selling" a miner to bruno. he then turns around and admits to sabotaging the miner by increasing the voltage to 0.96.
17. they lied about supplying me a new tracking number today 4/1/14.
18.
What's the next AMT lie?
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. zipkin lied about saying he was going to ship my miner as "punishment" for calling him out on this website and amazon.com
12. they lied about the wattage
13. josh said he was starting his "own forum"... just another lie.
14. they lied about saying they would hire someone to answer/help with phone calls and emails.
15. i think i can safely say AMT has lied about their MPP. They have shown no willingness to make up for late delivery and subsequent difficulty increases.
16. josh lied about "selling" a miner to bruno. he then turns around and admits to sabotaging the miner by increasing the voltage to 0.96.
17. they lied about supplying me a new tracking number today 4/1/14.
18.
What's the next AMT lie?
I don't want to hate on AMT but I had to put things in motion in order to retrieve my cash. That was all I wanted, I have enough drama without making more.
I tried being nice, then I switched to voicing my concerns about AMT, I will go back to nice mode again for a short while until they can send a check.
I tried being nice, then I switched to voicing my concerns about AMT, I will go back to nice mode again for a short while until they can send a check.
But to be clear. They have openly said miners are causing fires/overheating. I want a refund more now than ever as I fear for my property and family. It is not only my finances strained but safety.
Wait what? Quote that? what post?
We never said they miners are causing fires or overheating. The miner runs fine and perfectly, sometimes the chips can get a bit hot when running in turbo mode, but thats expected of any miner.
I was being mildly sarcastic to people who were misrepresenting things. If it works it works.
Yeah, that video shows how HONEST AMT is, putting out a ransom for someone, lying about paying it, and then giving one of your crappy miners away. NICE!!
dont forget how Josh "sabotaged" the miner voltage so IT would intentionally over heat. That comment was priceless. Josh says in the video bruno purchased the miner but then later on this forum says he intentionally set the voltage so as to destroy the miner.
CAN ANYONE TELL ME WHY JOSH WOULD LIE AND DO THIS TO A MINER HE SUPPOSEDLY SOLD?
HEY REGTABLE96 THIS IS WHAT JOSH IS GOING TO DO WITH YOUR MINER AFTER YOU SEE THE LIGHT AND REALIZE HE IS A FRAUD. ROFL!!
THIS IS AMT FOLKS. THIS IS HOW THEY OPERATE. THEY ARE SHADY PEOPLE MAN. THEY WILL SCREW YOU IN A HEARTBEAT IF THEY THINK THEY CAN GET AWAY WITH YOUR HARD EARNED MONEY.
I WANT YOU TO DEFEND THIS BEHAVIOR JOSHUA ZIPKIN!
Yeah, that video shows how HONEST AMT is, putting out a ransom for someone, lying about paying it, and then giving one of your crappy miners away. NICE!!
AMTI will contact and ask for a refund. I been asking every day, but I will take your word again and email them.
YOU A MASOCHIST?
Now them fan breakouts will be handy for me Ant pharm! Thanks.
AMTI will contact and ask for a refund. I been asking every day, but I will take your word again and email them.
Heck, why don't we pay you a ton of money, and then build the miners for you........... OH wait, that IS your suggestion. If you ever get your "build a miner" kit, I would like to know about it. It is a lie.
/applause
You guys are making mountains out of hills again. We offered the kit option for 2 reasons alone.
1. We noticed 3 out of 4 clients are removing their miners from the case anyway, either to look at it and or to give it better airflow or what ever. We know that because they are asking questions about reversing the fans, switching the modules, etc etc.
2. Its a faster build and shipment process. It gets people miners faster and gets our shipments over with, and maybe these 18 hour days can turn into 12 hour days.
That's all. Please stop making mountains out of hills.
We would like to get a few more opinions we'd like to get from you guys about what to throw in the kit.
First: fan connectors.
Well the preference of the fan connectors for the 8 fan cages.
option 1.
http://www.frozencpu.com/products/14665/ele-991/4-Pin_Power_Distribution_PCB_8xWay_Block_MMT-PCB-4-83.html?tl=g34c17s424
option 2.
http://www.frozencpu.com/products/14666/ele-992/3-Pin_Power_Distribution_PCB_4x_3-pin_4x_2-pin_Block_MMT-PCB-3-4342.html?tl=g34c17s424
option 3.
http://www.frozencpu.com/products/14668/ele-996/6-Pin_Power_Distribution_PCB_8xWay_Block_MMT-PCB-6-83.html?tl=g34c17s424
Or any better idea.
You guys are making mountains out of hills again. We offered the kit option for 2 reasons alone.
1. We noticed 3 out of 4 clients are removing their miners from the case anyway, either to look at it and or to give it better airflow or what ever. We know that because they are asking questions about reversing the fans, switching the modules, etc etc.
2. Its a faster build and shipment process. It gets people miners faster and gets our shipments over with, and maybe these 18 hour days can turn into 12 hour days.
That's all. Please stop making mountains out of hills.
We would like to get a few more opinions we'd like to get from you guys about what to throw in the kit.
First: fan connectors.
Well the preference of the fan connectors for the 8 fan cages.
option 1.
http://www.frozencpu.com/products/14665/ele-991/4-Pin_Power_Distribution_PCB_8xWay_Block_MMT-PCB-4-83.html?tl=g34c17s424
option 2.
http://www.frozencpu.com/products/14666/ele-992/3-Pin_Power_Distribution_PCB_4x_3-pin_4x_2-pin_Block_MMT-PCB-3-4342.html?tl=g34c17s424
option 3.
http://www.frozencpu.com/products/14668/ele-996/6-Pin_Power_Distribution_PCB_8xWay_Block_MMT-PCB-6-83.html?tl=g34c17s424
Or any better idea.
/facepam
These guys are telling you how to put together "parts" with no credit given? I don't even believe they are capable of shipping parts. Nothing they have said has ever been true. NOTHING.
Heck, why don't we pay you a ton of money, and then build the miners for you........... OH wait, that IS your suggestion. If you ever get your "build a miner" kit, I would like to know about it. It is a lie.
You guys are making mountains out of hills again. We offered the kit option for 2 reasons alone.
1. We noticed 3 out of 4 clients are removing their miners from the case anyway, either to look at it and or to give it better airflow or what ever. We know that because they are asking questions about reversing the fans, switching the modules, etc etc.
2. Its a faster build and shipment process. It gets people miners faster and gets our shipments over with, and maybe these 18 hour days can turn into 12 hour days.
That's all. Please stop making mountains out of hills.
We would like to get a few more opinions we'd like to get from you guys about what to throw in the kit.
First: fan connectors.
Well the preference of the fan connectors for the 8 fan cages.
option 1.
http://www.frozencpu.com/products/14665/ele-991/4-Pin_Power_Distribution_PCB_8xWay_Block_MMT-PCB-4-83.html?tl=g34c17s424
option 2.
http://www.frozencpu.com/products/14666/ele-992/3-Pin_Power_Distribution_PCB_4x_3-pin_4x_2-pin_Block_MMT-PCB-3-4342.html?tl=g34c17s424
option 3.
http://www.frozencpu.com/products/14668/ele-996/6-Pin_Power_Distribution_PCB_8xWay_Block_MMT-PCB-6-83.html?tl=g34c17s424
Or any better idea.
I do not want a kit, I would just like a refund.
Alright, please write to [email protected] and someone will get back to you. Thanks.
send my refund too. i do not want anything from you.
send me my refund. i dont want anything from you. so you dont want a refund right??? mr gramma general
I challenge you to find me just 1 update or delivery date that was true. this goes or you too zipkin... name one instance you have told the truth.
I'll take kits for order 899 if that's what it takes. I have psus I can use... AMT?
I do not want a kit, I would just like a refund.
Alright, please write to [email protected] and someone will get back to you. Thanks.
send my refund too. i do not want anything from you.
send me my refund. i dont want anything from you. so you dont want a refund right??? mr gramma general
Jump to: