Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 17.

kev7112001

sr. member

Activity: 479

Merit: 250

Quote from: pepi on May 14, 2018, 11:25:37 AM

What modification should be make on miner to got option for solo mining with XPM wallet?
Since Claymore make miner long time ago, and he use official build, it look like some part in miner is missing to got this option!

you need to use server modded wallet that has protobuf from old thread

pepi

full member

Activity: 414

Merit: 101

What modification should be make on miner to got option for solo mining with XPM wallet?
Since Claymore make miner long time ago, and he use official build, it look like some part in miner is missing to got this option!

Hyp0crit

newbie

Activity: 109

Merit: 0

Quote from: Hann on May 13, 2018, 03:07:54 PM

My mining rig keeps crashing after 2 sec of mining. I am using Windows 18.2 Adrenalin Driver and 10.2 Miner. Can someone help me?

Try default settings/delete kernels from miner folder and try again.
Do you see any error messages?

taxidrvr

newbie

Activity: 8

Merit: 0

Thanks to eXtremal and those who have stayed with Primecoin through thick and thin.

Though I am not heavily-invested, I really see XPM as being more valuable then most PoW coins, especially
in 10-20 years.

If ASIC development occurs for XPM, it will be a testament to the technological advances associated with PoW-based cryptocurrencies and blockchain technology.

ruplikminer

jr. member

Activity: 504

Merit: 3

Quote from: Hann on May 13, 2018, 03:07:54 PM

My mining rig keeps crashing after 2 sec of mining. I am using Windows 18.2 Adrenalin Driver and 10.2 Miner. Can someone help me?

Change rig.

Hann

newbie

Activity: 4

Merit: 0

My mining rig keeps crashing after 2 sec of mining. I am using Windows 18.2 Adrenalin Driver and 10.2 Miner. Can someone help me?

rockallnight

newbie

Activity: 26

Merit: 0

it's working now i hope it doesn't happen again as i like the pool

Quote from: Rawhide9000 on May 12, 2018, 08:59:48 AM

Quote

It was internet connection problem, now cannot reproduce, ping with 1000 packets from different countries shows 0% packet loss. Pool software works stable.

Thanks for checking. The problem persisted until 12:54 UTC today for me. Probably something in the middle.

Rawhide9000

newbie

Activity: 7

Merit: 0

Quote

It was internet connection problem, now cannot reproduce, ping with 1000 packets from different countries shows 0% packet loss. Pool software works stable.

Thanks for checking. The problem persisted until 12:54 UTC today for me. Probably something in the middle.

Hyp0crit

newbie

Activity: 109

Merit: 0

Quote from: rockallnight on May 12, 2018, 05:43:06 AM

still same issue

(ST/INV/DUP): 281x 7ch(2/0/2) 36x 8ch(0/0/0) 5x 9ch(0/0/0)
Connection lost, reconnecting...
Connecting to frontend: xpmforall.org:6666 ...
Connecting to bitcoin: xpmforall.org:60002 ...
Connecting to signals: xpmforall.org:60003 ...
Work received: height=2657937 diff=11.659814 latency=812ms
GPU 0 found share: 7-ch type 1
Connection lost, reconnecting...
Connecting to frontend: xpmforall.org:6666 ...
Connecting to bitcoin: xpmforall.org:60000 ...
Connecting to signals: xpmforall.org:60001 ...
Work received: height=2657941 diff=11.659962 latency=562ms
GPU 0 found share: 7-ch type 2
Connection lost, reconnecting...
Connecting to frontend: xpmforall.org:6666 ...
Connecting to bitcoin: xpmforall.org:60002 ...
Connecting to signals: xpmforall.org:60003 ...
Work received: height=2657943 diff=11.659844 latency=581ms

Working fine here. Havent seen any loat connections.
Check your own internet connection if there is a issue?

rockallnight

newbie

Activity: 26

Merit: 0

still same issue

(ST/INV/DUP): 281x 7ch(2/0/2) 36x 8ch(0/0/0) 5x 9ch(0/0/0)
Connection lost, reconnecting...
Connecting to frontend: xpmforall.org:6666 ...
Connecting to bitcoin: xpmforall.org:60002 ...
Connecting to signals: xpmforall.org:60003 ...
Work received: height=2657937 diff=11.659814 latency=812ms
GPU 0 found share: 7-ch type 1
Connection lost, reconnecting...
Connecting to frontend: xpmforall.org:6666 ...
Connecting to bitcoin: xpmforall.org:60000 ...
Connecting to signals: xpmforall.org:60001 ...
Work received: height=2657941 diff=11.659962 latency=562ms
GPU 0 found share: 7-ch type 2
Connection lost, reconnecting...
Connecting to frontend: xpmforall.org:6666 ...
Connecting to bitcoin: xpmforall.org:60002 ...
Connecting to signals: xpmforall.org:60003 ...
Work received: height=2657943 diff=11.659844 latency=581ms

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Quote from: Rawhide9000 on May 11, 2018, 09:01:02 PM

The latency is also super high, much higher than usual. It is normally in the <130 ms range.
A ping of coinsforall.io shows a 20% packet loss.
--- coinsforall.io ping statistics --- 249 packets transmitted, 199 received, 20% packet loss, time 248475ms rtt min/avg/max/mdev = 109.241/133.198/387.692/40.559 ms
The xpmforall.org pool also shows similar stats although I did not run as long:
--- xpmforall.org ping statistics --- 70 packets transmitted, 57 received, 18% packet loss, time 69147ms rtt min/avg/max/mdev = 109.909/131.011/324.011/32.249 ms

I also ran a traceroute and tried to ping some of the intermediate routers to see if it is the ISP or the destination, but none of those addresses are pingable, which is not unusual.

It was internet connection problem, now cannot reproduce, ping with 1000 packets from different countries shows 0% packet loss. Pool software works stable.

Rawhide9000

newbie

Activity: 7

Merit: 0

I am seeing the same thing as rockallnight posted. All of my miners are randomly disconnected and connecting to the pool. It looks like this in the window:

GPU 0 found share: 7-ch type 1 GPU 2 found share: 7-ch type 3 Connection lost, reconnecting... Connecting to frontend: coinsforall.io:6666 ... Connecting to bitcoin: 151.80.96.105:60000 ... Connecting to signals: 151.80.96.105:60001 ... Work received: height=2657522 diff=11.666903 latency=1256ms GPU 3 found share: 7-ch type 3

The latency is also super high, much higher than usual. It is normally in the <130 ms range.
A ping of coinsforall.io shows a 20% packet loss.
--- coinsforall.io ping statistics --- 249 packets transmitted, 199 received, 20% packet loss, time 248475ms rtt min/avg/max/mdev = 109.241/133.198/387.692/40.559 ms
The xpmforall.org pool also shows similar stats although I did not run as long:
--- xpmforall.org ping statistics --- 70 packets transmitted, 57 received, 18% packet loss, time 69147ms rtt min/avg/max/mdev = 109.909/131.011/324.011/32.249 ms

I also ran a traceroute and tried to ping some of the intermediate routers to see if it is the ISP or the destination, but none of those addresses are pingable, which is not unusual.

rockallnight

newbie

Activity: 26

Merit: 0

Pool not stable & disconnect frequently any update Huh

?

MinedTangerine

jr. member

Activity: 308

Merit: 4

Quote from: buny on May 11, 2018, 05:06:06 AM

Quote from: Spin Lobby on May 11, 2018, 01:30:03 AM

Can we do cloud mining? Do you know of an updated tutorial?

coin young. only five years ... eXtremal has not yet written an instruction. We must wait. Grin

Five years in crypto is like 1000 years

buny

full member

Activity: 237

Merit: 100

Quote from: Spin Lobby on May 11, 2018, 01:30:03 AM

Can we do cloud mining? Do you know of an updated tutorial?

coin young. only five years ... eXtremal has not yet written an instruction. We must wait. Grin

Spin Lobby

newbie

Activity: 2

Merit: 0

Can we do cloud mining? Do you know of an updated tutorial?

Quote from: eXtremal on March 18, 2018, 09:25:59 AM

Next miner update:
http://coinsforall.io/distr/xpmclient-10.2.2-beta.tar.gz
http://coinsforall.io/distr/xpmclient-10.2.2-beta-win64.tar.gz

Quote

No more invalid shares with odd targets (including target="11"), previous miners have 3-4% invalid share rate.
Remove obsolete parameters from config.txt
Add new parameter to config.txt:

# Maximal bit size of multipliers using with primorials 13, 14 and 15;
# Default values are 26, 33, 36
# Less values increases prime probability, but sieve generate less candidates
multiplierLimits = ["25", "31", "34"];

And also some useful hints for getting more CPD on different GPUs with target="11":

Radeon RX Vega

Quote

sieveSize = "630";
weaveDepth = "36864";
multiplierLimits = ["25", "31", "34"];

Radeon R9 290 & R9 390

Quote

sieveSize = "630";

Radeon RX 4xx & RX 5xx

Quote

windowSize = "8192";
multiplierLimits = ["24", "31", "35"];

fluxy12

jr. member

Activity: 145

Merit: 1

Quote from: Hyp0crit on May 10, 2018, 02:08:21 PM

Quote from: fluxy12 on May 10, 2018, 12:18:40 PM

I cannot tune the voltage with AB so it consume 1200W for 6 rx580 ...

that's a lot, i'll try to find something to undervolt them.

2x295x2 & 2x 7950
1650w

Btw did you check afterburner settings for voltage control.

Thank you, i didn't checked it, so now the better i can get is :

6 * RX580 msi armor 8gb :
950W
2.28 CPD

Config :
target = "auto";
sieveSize = "600";
weaveDepth = "40960";
18.3.2 drivers and 10.2.2 miner version
width = "auto";
windowSize = "8192";
multiplierLimits = ["24", "31", "35"];
sievePerRound = ["5", "5", "5", "5", "5", "5"];

Hyp0crit

newbie

Activity: 109

Merit: 0

Quote from: fluxy12 on May 10, 2018, 12:18:40 PM

I cannot tune the voltage with AB so it consume 1200W for 6 rx580 ...

that's a lot, i'll try to find something to undervolt them.

2x295x2 & 2x 7950
1650w

Btw did you check afterburner settings for voltage control.

fluxy12

jr. member

Activity: 145

Merit: 1

Quote from: abrgeza on May 10, 2018, 12:34:59 PM

Quote from: fluxy12 on May 10, 2018, 12:18:40 PM

Hello,

Stupid question but i don't find how to change coreclock, like this for exemple ?

corefreq = ["1250", "1250", "1250", "1250", "1250", "1250"];
memfreq = ["2150", "2150", "2150", "2150", "2150", "2150"];
powertune = ["850", "850", "850", "850", "850", "850"];
fanspeed = ["50", "50", "50", "50", "50", "50"];

don't change it with xpmclient, just put +0 in all fields.
coreclock and other things change with msi ab.

Quote

Also i have a problem, when i change

windowSize = "4096"; to windowSize = "8192";

The miner crash, i have 18.3.2 drivers and 10.2.2 miner version, i can only get max 0.3 with stock settings (RX580 armor 8gb).

Can someone help with this config ?

after you change anything in config.txt delete all kernel files. restart xpmclient and compile new kernel files.
0.3 is too low, it should not be less than 0.42 even if you have slow celeron cpu.
btw, i have best expirience with blockchain drivers.

Hello, thank you ! i followed your advices and i have now 0.4 !

I cannot tune the voltage with AB so it consume 1200W for 6 rx580 ...

that's a lot, i'll try to find something to undervolt them.

abrgeza

jr. member

Activity: 117

Merit: 2

Quote from: fluxy12 on May 10, 2018, 12:18:40 PM

Hello,

Stupid question but i don't find how to change coreclock, like this for exemple ?

corefreq = ["1250", "1250", "1250", "1250", "1250", "1250"];
memfreq = ["2150", "2150", "2150", "2150", "2150", "2150"];
powertune = ["850", "850", "850", "850", "850", "850"];
fanspeed = ["50", "50", "50", "50", "50", "50"];

don't change it with xpmclient, just put +0 in all fields.
coreclock and other things change with msi ab.

Quote

Also i have a problem, when i change

windowSize = "4096"; to windowSize = "8192";

The miner crash, i have 18.3.2 drivers and 10.2.2 miner version, i can only get max 0.3 with stock settings (RX580 armor 8gb).

Can someone help with this config ?

after you change anything in config.txt delete all kernel files. restart xpmclient and compile new kernel files.
0.3 is too low, it should not be less than 0.42 even if you have slow celeron cpu.
btw, i have best expirience with blockchain drivers.

Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 17. (Read 110186 times)