when you create 10.3 miner my friend?
Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 31. (Read 110186 times)
[/quote]
Miner can't write to its own directory? Run chmod -R a+w on it.
Current version is 10.2.2, not 10.2.1
[/quote]
Silly me..
Thank you very much, eXtremal.
[/quote]
hi
old cards like 270(x), 7850 work well only with 10.2.1 version
with 10.2.2 work only without 14.X ocl & gives worst rezult than 10.2.1 (without 14.x ocl driver)
eXtremal
if you have right parameter for those cards,pls share
(all in win 7 64bit) 10.2.1 work well with 15.7.1 driver + 14.X ocl driver , but with 15.12 wont work with 14.x ocl driver
Quote
I have hidden DTC pool on coinsforall: http://coinsforall.io/#!/coin/DTC, but it not tested. I have moved I gpu to it for testing purposes 
Are you working on this? I would mine on this pool if it was fully developed
Quote
server = "coinsforall.io";
port = "6670";
port = "6670";
Are you working on this? I would mine on this pool if it was fully developed
What have I missed please?
Thank you!
Current version is 10.2.2, not 10.2.1
If you had a Datacoin pool, I'd totally use it.
Your work is much appreciated - been using your miners for years on Datacoin.
The Primecoin - Datacoin alliance could bring everyone to great heights
I have hidden DTC pool on coinsforall: http://coinsforall.io/#!/coin/DTC, but it not tested. I have moved I gpu to it for testing purposes Your work is much appreciated - been using your miners for years on Datacoin.
The Primecoin - Datacoin alliance could bring everyone to great heights
why am i getting
* warning: ran out of hashes, increasing sha256 work size coefficient to 65536
* warning: ran out of hashes, increasing sha256 work size coefficient to 65536
* warning: ran out of hashes, increasing sha256 work size coefficient to 98304
* warning: ran out of hashes, increasing sha256 work size coefficient to 131072
Then its starting?
It's ok, miner adjust its parameters at start. * warning: ran out of hashes, increasing sha256 work size coefficient to 65536
* warning: ran out of hashes, increasing sha256 work size coefficient to 65536
* warning: ran out of hashes, increasing sha256 work size coefficient to 98304
* warning: ran out of hashes, increasing sha256 work size coefficient to 131072
Then its starting?
If you had a Datacoin pool, I'd totally use it.
Your work is much appreciated - been using your miners for years on Datacoin.
The Primecoin - Datacoin alliance could bring everyone to great heights
Your work is much appreciated - been using your miners for years on Datacoin.
The Primecoin - Datacoin alliance could bring everyone to great heights
why am i getting
* warning: ran out of hashes, increasing sha256 work size coefficient to 65536
* warning: ran out of hashes, increasing sha256 work size coefficient to 65536
* warning: ran out of hashes, increasing sha256 work size coefficient to 98304
* warning: ran out of hashes, increasing sha256 work size coefficient to 131072
Then its starting?
* warning: ran out of hashes, increasing sha256 work size coefficient to 65536
* warning: ran out of hashes, increasing sha256 work size coefficient to 65536
* warning: ran out of hashes, increasing sha256 work size coefficient to 98304
* warning: ran out of hashes, increasing sha256 work size coefficient to 131072
Then its starting?
I'm getting
R9 390 - win8.1, driver 15.12 - 0.33-0.35 CPD.
but
R9 390 - win7, driver 15.12 - 0.47-0.48 CPD.
do u have any clues?
P.S.
I've tried changing sieveSize = "630", but miner just does not start.
R9 390 - win8.1, driver 15.12 - 0.33-0.35 CPD.
but
R9 390 - win7, driver 15.12 - 0.47-0.48 CPD.
do u have any clues?
P.S.
I've tried changing sieveSize = "630", but miner just does not start.
delete old kernel and start miner.
Deleting old kernel helped to start miner. Thank you.
Getting same CPD with sieveSize = "630"
I've tried changing sieveSize = "630", but miner just does not start.
Miner starts and saysQuote
Existing OpenCL kernel (kernel.bin) incompatible with configuration
Please remove kernel.bin file and restart miner
If you run miner from console (cmd.exe or other) or use .bat file with PAUSE, you can see it.Please remove kernel.bin file and restart miner
Need remove files kernelxpm_gpu0.cl and others.
For Windows 8.1 and 10 with 390 GPUs, I don't have a solution. For Windows 7 and Linux you can use 15.12 and OCL from 14.x http://cryptomining-blog.com/tag/amd-opencl/
I'm getting
R9 390 - win8.1, driver 15.12 - 0.33-0.35 CPD.
but
R9 390 - win7, driver 15.12 - 0.47-0.48 CPD.
do u have any clues?
P.S.
I've tried changing sieveSize = "630", but miner just does not start.
R9 390 - win8.1, driver 15.12 - 0.33-0.35 CPD.
but
R9 390 - win7, driver 15.12 - 0.47-0.48 CPD.
do u have any clues?
P.S.
I've tried changing sieveSize = "630", but miner just does not start.
delete old kernel and start miner.
0.47cpd for RX580
0.57cpd for R9 Fury
0.66cpd for R9 Fury X
those results are after 30 min of mining
0.57cpd for R9 Fury
0.66cpd for R9 Fury X
those results are after 30 min of mining
With blockchain drivers?
yes
I'm getting
R9 390 - win8.1, driver 15.12 - 0.33-0.35 CPD.
but
R9 390 - win7, driver 15.12 - 0.47-0.48 CPD.
do u have any clues?
P.S.
I've tried changing sieveSize = "630", but miner just does not start.
R9 390 - win8.1, driver 15.12 - 0.33-0.35 CPD.
but
R9 390 - win7, driver 15.12 - 0.47-0.48 CPD.
do u have any clues?
P.S.
I've tried changing sieveSize = "630", but miner just does not start.
0.47cpd for RX580
0.57cpd for R9 Fury
0.66cpd for R9 Fury X
those results are after 30 min of mining
0.57cpd for R9 Fury
0.66cpd for R9 Fury X
those results are after 30 min of mining
With blockchain drivers?
0.47cpd for RX580
0.57cpd for R9 Fury
0.66cpd for R9 Fury X
those results are after 30 min of mining
0.57cpd for R9 Fury
0.66cpd for R9 Fury X
those results are after 30 min of mining
What multiplierLimits is optimal for 10xx series gpu?
R9 280x 1070/1600 (ASUS) 0.39 CPD (WIN10, 17.12.2 driver)
RX 580 4gb 1366/1750 (Sapphire Pulse) 0.37-0.38 CPD (WIN10, blockchain driver)
RX 470 4gb 1206 or 1226/1750 (ASUS Mining Edition or XFX) 0.33 CPD (WIN10, blockchain driver)
I use 10.2 beta miner, because it was already downloaded on rigs, 10.2.2 beta miner gives the same results (tested on one rig), so i don`t update it on others.
10.2.2 give same results, but don't generate 4% invalid shares like previous miners.RX 580 4gb 1366/1750 (Sapphire Pulse) 0.37-0.38 CPD (WIN10, blockchain driver)
RX 470 4gb 1206 or 1226/1750 (ASUS Mining Edition or XFX) 0.33 CPD (WIN10, blockchain driver)
I use 10.2 beta miner, because it was already downloaded on rigs, 10.2.2 beta miner gives the same results (tested on one rig), so i don`t update it on others.
Did you try windowSize = "8192"; for RX 580 and RX 570 ?
Yeah, i got 0.41-0.42 CPD per one RX 580
R9 280x 1070/1600 (ASUS) 0.39 CPD (WIN10, 17.12.2 driver)
RX 580 4gb 1366/1750 (Sapphire Pulse) 0.37-0.38 CPD (WIN10, blockchain driver)
RX 470 4gb 1206 or 1226/1750 (ASUS Mining Edition or XFX) 0.33 CPD (WIN10, blockchain driver)
I use 10.2 beta miner, because it was already downloaded on rigs, 10.2.2 beta miner gives the same results (tested on one rig), so i don`t update it on others.
10.2.2 give same results, but don't generate 4% invalid shares like previous miners.RX 580 4gb 1366/1750 (Sapphire Pulse) 0.37-0.38 CPD (WIN10, blockchain driver)
RX 470 4gb 1206 or 1226/1750 (ASUS Mining Edition or XFX) 0.33 CPD (WIN10, blockchain driver)
I use 10.2 beta miner, because it was already downloaded on rigs, 10.2.2 beta miner gives the same results (tested on one rig), so i don`t update it on others.
Did you try windowSize = "8192"; for RX 580 and RX 570 ?
R9 280x 1070/1600 (ASUS) 0.39 CPD (WIN10, 17.12.2 driver)
RX 580 4gb 1366/1750 (Sapphire Pulse) 0.37-0.38 CPD (WIN10, blockchain driver)
RX 470 4gb 1206 or 1226/1750 (ASUS Mining Edition or XFX) 0.33 CPD (WIN10, blockchain driver)
I use 10.2 beta miner, because it was already downloaded on rigs, 10.2.2 beta miner gives the same results (tested on one rig), so i don`t update it on others.
RX 580 4gb 1366/1750 (Sapphire Pulse) 0.37-0.38 CPD (WIN10, blockchain driver)
RX 470 4gb 1206 or 1226/1750 (ASUS Mining Edition or XFX) 0.33 CPD (WIN10, blockchain driver)
I use 10.2 beta miner, because it was already downloaded on rigs, 10.2.2 beta miner gives the same results (tested on one rig), so i don`t update it on others.
Next miner update:
http://coinsforall.io/distr/xpmclient-10.2.2-beta.tar.gz
http://coinsforall.io/distr/xpmclient-10.2.2-beta-win64.tar.gz
And also some useful hints for getting more CPD on different GPUs with target="11":
Radeon RX Vega
http://coinsforall.io/distr/xpmclient-10.2.2-beta.tar.gz
http://coinsforall.io/distr/xpmclient-10.2.2-beta-win64.tar.gz
Quote
No more invalid shares with odd targets (including target="11"), previous miners have 3-4% invalid share rate.
Remove obsolete parameters from config.txt
Add new parameter to config.txt:
# Maximal bit size of multipliers using with primorials 13, 14 and 15;
# Default values are 26, 33, 36
# Less values increases prime probability, but sieve generate less candidates
multiplierLimits = ["25", "31", "34"];
Remove obsolete parameters from config.txt
Add new parameter to config.txt:
# Maximal bit size of multipliers using with primorials 13, 14 and 15;
# Default values are 26, 33, 36
# Less values increases prime probability, but sieve generate less candidates
multiplierLimits = ["25", "31", "34"];
And also some useful hints for getting more CPD on different GPUs with target="11":
Radeon RX Vega
Quote
sieveSize = "630";
weaveDepth = "36864";
multiplierLimits = ["25", "31", "34"];
Radeon R9 290 & R9 390weaveDepth = "36864";
multiplierLimits = ["25", "31", "34"];
Quote
sieveSize = "630";
Radeon RX 4xx & RX 5xxQuote
windowSize = "8192";
multiplierLimits = ["24", "31", "35"];
multiplierLimits = ["24", "31", "35"];
The powerlimit "-1" in config file actually changes powerlimit to -1. I reset all settings to default in msi afterburner, then start xpmclient, then i check the msi afterburner and PL is -1.
just put "+0" instead "-1"
Yes I did it. I just want to say that description is wrong about PL in config.
just depends on setup its been like that for years old driver and win 7 and older afterburner it was correct
Jump to: