Pages:
Author

Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 34. (Read 110186 times)

sr. member
Activity: 2106
Merit: 282
👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Quote
both of your pools count shares sended by clients so real CPD does not matter?
Pool reject shares with wrong target (less than current difficulty). Without it, you can set target="6" and generate 81 times more shares without blocks. Why pool must pay for this shares?

i was talking about valid shares, not interest in cheating.
what i saw is that xpmclient 10.2 with target=10 generates more shares than same client with target=11 for the same difficulty.
i didn't direct compare it with xpmclient9.4.1 but it seems that is better to force old xpmclient until EOL.

See F.A.Q. https://bitcointalksearch.org/topic/open-source-xpm-primecoin-gpu-miner-pool-xpmforallorg-831708
Quote
What happens if I will use invalid target settings?

You will get less profit:
* difficulty < 10.994 and target="11": miner will generate less amount if shares.
* difficulty > 10.994 and target="10": big amount of shares will be marked as invalid.

When pool switches to "11ch" mode, it begin reject shares from xpmclient with target="10", because it's cheating same as target="9","8" etc. Now pool again in 10ch mode until 10.994 difficulty, best option now is using target="10" and wait xpmclient 10.2.1 release.
I try release xpmclient 10.2 and switch pool to "11ch" at 10.991 difficulty, but less than 10% miners install xpmclient 10.2 or put target="11" to config.txt, all others continue using old settings. I decide that miners don't ready and make rollback.
jr. member
Activity: 117
Merit: 2

Quote
both of your pools count shares sended by clients so real CPD does not matter?
Pool reject shares with wrong target (less than current difficulty). Without it, you can set target="6" and generate 81 times more shares without blocks. Why pool must pay for this shares?

i was talking about valid shares, not interest in cheating.
what i saw is that xpmclient 10.2 with target=10 generates more shares than same client with target=11 for the same difficulty.
i didn't direct compare it with xpmclient9.4.1 but it seems that is better to force old xpmclient until EOL.
full member
Activity: 237
Merit: 100
Quote
how relevant is the text of "Primecoin mining calculator (1 Scrypt Mh = 15.6 CPD)"?
Ohh, about 4 years ago Litecoin GPU mining was actual, overclocked Radeon R9 290X did 1000KHash/s in scrypt algo.. and 15.6 CPD on XPM. Now it's useless information Smiley
Grin
I repaired the RX560 ...
3xRX560 = 0.46
but it's still much smaller than it was ...
sr. member
Activity: 2106
Merit: 282
👉bit.ly/3QXp3oh | 🔥 Ultimate Launc
...and install xpmclient 10.2.1
it was already 10.2.1?! Where? saw only 10.2 ...
https://bitcointalksearch.org/topic/open-source-xpm-primecoin-gpu-miner-pool-xpmforallorg-831708
Most recommended miner is xpmclient 10.2.1 (will be available in 24 hours)
Quote
how relevant is the text of "Primecoin mining calculator (1 Scrypt Mh = 15.6 CPD)"?
Ohh, about 4 years ago Litecoin GPU mining was actual, overclocked Radeon R9 290X did 1000KHash/s in scrypt algo.. and 15.6 CPD on XPM. Now it's useless information Smiley
full member
Activity: 237
Merit: 100
...and install xpmclient 10.2.1
it was already 10.2.1?! Where? saw only 10.2 ...
sr. member
Activity: 2106
Merit: 282
👉bit.ly/3QXp3oh | 🔥 Ultimate Launc
@all: read this F.A.Q. please. If you have more questions, I will add it.
https://bitcointalksearch.org/topic/open-source-xpm-primecoin-gpu-miner-pool-xpmforallorg-831708
briefly: set target="10", then wait and install xpmclient 10.2.1 - after this release no more changes in target switching procedure.
Sorry for xpmclient 10.2 users, if more miners update their clients, you will not need change settings.

Quote
both of your pools count shares sended by clients so real CPD does not matter?
Pool reject shares with wrong target (less than current difficulty). Without it, you can set target="6" and generate 81 times more shares without blocks. Why pool must pay for this shares?
jr. member
Activity: 117
Merit: 2
CPD pool dropped by 25% per day. Smiley

Because some miners uses target=10 others target=11, pool can't show real CPD now.

both of your pools count shares sended by clients so real CPD does not matter?
sr. member
Activity: 2106
Merit: 282
👉bit.ly/3QXp3oh | 🔥 Ultimate Launc
CPD pool dropped by 25% per day. Smiley

Because some miners uses target=10 others target=11, pool can't show real CPD now.
full member
Activity: 237
Merit: 100
CPD pool dropped by 25% per day. Smiley
jr. member
Activity: 40
Merit: 1
18.2.3 not optimal for R9 390.
I know, but the zoo is 3 x R9 390 + Vega 56
I need to throw the 390th on a separate platform
For Russian support ..........
double google translation - render mosk Grin
sr. member
Activity: 2106
Merit: 282
👉bit.ly/3QXp3oh | 🔥 Ultimate Launc
R9 390 must show ...................... 0.5 CPD with target=11
Maybe Roll Eyes
9.4.1, target = "11", driver 18.2.3



off
Интepecнo, в тeмe ecть люди, нe влaдeющиe вeликим и мoгyчим Grin
18.2.3 not optimal for R9 390.
Best driver for 290/290X is Catalyst 14.6, but this driver may not recognize newer R9 390 card. Usually miners use Catalyst 15.12 driver and AMD OpenCL dll from 14.6 in miner directory for R9 390/390X. Properly speed is ~14CPD with target=10 and 0.5x with target=11.
Quote
Интepecнo, в тeмe ecть люди, нe влaдeющиe вeликим и мoгyчим
For Russian support use PM or email from coinsforall.io website, here English only Smiley
newbie
Activity: 48
Merit: 0
You can try 9.4.1 with target 11 and width 22 in config.txt
Not working, miner crashes at start...
Screenshot please.
Quote
what problem with miner - why speed low?
Ok, it seems move to difficulty 11 is not easy Smiley
Today I'll add a faq to first post at this topic and release xpmclient 10.2.1 after 1 day (at 10 March).
ok))we all wait
sr. member
Activity: 2106
Merit: 282
👉bit.ly/3QXp3oh | 🔥 Ultimate Launc
You can try 9.4.1 with target 11 and width 22 in config.txt
Not working, miner crashes at start...
Screenshot please.
Quote
what problem with miner - why speed low?
Ok, it seems move to difficulty 11 is not easy Smiley
Today I'll add a faq to first post at this topic and release xpmclient 10.2.1 after 1 day (at 10 March).
newbie
Activity: 48
Merit: 0
R9 390 must show ...................... 0.5 CPD with target=11
Maybe Roll Eyes
9.4.1, target = "11", driver 18.2.3
https://b.radikal.ru/b27/1803/db/18eed36f385e.png


off
Интepecнo, в тeмe ecть люди, нe влaдeющиe вeликим и мoгyчим Grin
coмнитeльнo)) Grin
jr. member
Activity: 40
Merit: 1
R9 390 must show ...................... 0.5 CPD with target=11
Maybe Roll Eyes
9.4.1, target = "11", driver 18.2.3



off
Интepecнo, в тeмe ecть люди, нe влaдeющиe вeликим и мoгyчим Grin
newbie
Activity: 48
Merit: 0
RX560.
9.4.1 = 3.2cpd
10.2 = 0.05cpd
this is normal? I'm in vain worrying?  Roll Eyes
0.05 cpd not normal, must be 0.11 CPD. You can try 9.4.1 with target 11 and width 22 in config.txt
hi my friend)it Arkadiy)))
what problem with miner - why speed low?
newbie
Activity: 142
Merit: 0
You can try 9.4.1 with target 11 and width 22 in config.txt
Not working, miner crashes at start...
sr. member
Activity: 2106
Merit: 282
👉bit.ly/3QXp3oh | 🔥 Ultimate Launc
RX560.
9.4.1 = 3.2cpd
10.2 = 0.05cpd
this is normal? I'm in vain worrying?  Roll Eyes
0.05 cpd not normal, must be 0.11 CPD. You can try 9.4.1 with target 11 and width 22 in config.txt
full member
Activity: 237
Merit: 100
RX560.
9.4.1 = 3.2cpd
10.2 = 0.05cpd
this is normal? I'm in vain worrying?  Roll Eyes
sr. member
Activity: 2106
Merit: 282
👉bit.ly/3QXp3oh | 🔥 Ultimate Launc


Look this calculator screenshots.
Pages:
Jump to: