Cryptomined has posted link for all versions - https://www.youtube.com/watch?v=vMqjjOgzwQY
Topic: Optiminer/Zcash v1.7 (GPU, Windows+Linux, AMD) - page 32. (Read 115930 times)
Thread closed due to lack of development 😂
Should we do same to claymore lol?
Looks like the developer ABANDONED this project because someone released a "no-dev" fee version on the ZEC Forum.
Version 0.6.0 has been release increasing hash rate by 20-30%!
https://github.com/Optiminer/OptiminerZcash
https://github.com/Optiminer/OptiminerZcash
Wow this thing flys (290s~200+), but unfortunately a gpu crashes every 10 minutes. Even setting intensity low eventually power seems to creep back up. Back to eth for now
You need to reduce the core frequency by 5 to 10 MHz. The new software will stress the GPU more than the old version.
It still crashes even with -i 1.
and it tells me what, exactly? 198H/s?
OK, i already suggested to look for S/s on Optiminer, NOT I/s. It should be a similar number of around 200 S/s.
I am getting 170 S/s on 470 (Optiminer 0.6.0), which is about 15% weaker card in comparison with 480, and i did not do any mods whatsoever. Some people report 185 S/s on 470 with modded bios.
I'm just want to let somebody show his results on optiminer - to compare hashrate, clocks and power consumption. OK, i already suggested to look for S/s on Optiminer, NOT I/s. It should be a similar number of around 200 S/s.
I am getting 170 S/s on 470 (Optiminer 0.6.0), which is about 15% weaker card in comparison with 480, and i did not do any mods whatsoever. Some people report 185 S/s on 470 with modded bios.
Maybe I do something wrong and there's some way to tune my rig better for optiminer.
My screen is only to show what i have already.
...and it's gone. Hold on to now precious tar.
Open source f-ed itself in this particular case.
Threatening somebody's livelihood because you don't like to pay a fee?
Wow.
Open source f-ed itself in this particular case.
Threatening somebody's livelihood because you don't like to pay a fee?
Wow.
280x ~170sol/s
rx470 ~170sol/s
rx470 ~170sol/s
Same here with the 280x at stock clocks (1100/1500).
You are looking at the wrong number. Look for S/s (which is the same as H/s) number in the TOTAL lane...it should be about twice as large as I/s number.
This is what I have on Claymore V8 img snipped
and it tells me what, exactly? 198H/s?
OK, i already suggested to look for S/s on Optiminer, NOT I/s. It should be a similar number of around 200 S/s.
I am getting 170 S/s on 470 (Optiminer 0.6.0), which is about 15% weaker card in comparison with 480, and i did not do any mods whatsoever. Some people report 185 S/s on 470 with modded bios.
where can i download the windows version?
no more windows version?
windows version:
http://www63.zippyshare.com/v/XpaxKyiU/file.html
It might be a virus
Check link : https://virustotal.com/en/file/c69b864b83fc22219a279f932e93ecb3d619913741c9f53c3d50adc97f95fa5e/analysis/
You are looking at the wrong number. Look for S/s (which is the same as H/s) number in the TOTAL lane...it should be about twice as large as I/s number.
This is what I have on Claymore V8 
Cryptomined has posted link for all versions - https://www.youtube.com/watch?v=vMqjjOgzwQY
where can i download the windows version?
no more windows version?
windows version:
http://www63.zippyshare.com/v/XpaxKyiU/file.html
Finally it runs
intensity = 10
4*RX 480 8 GB 1280/2100 gpu/mem.
400-404 I/s total.
But Claymore V8 shows 800-810 H/s total and 50 W less power consumption on same settings.
intensity = 10
4*RX 480 8 GB 1280/2100 gpu/mem.
400-404 I/s total.
But Claymore V8 shows 800-810 H/s total and 50 W less power consumption on same settings.
You are looking at the wrong number. Look for S/s (which is the same as H/s) number in the TOTAL lane...it should be about twice as large as I/s number.
where can i download the windows version?
no more windows version?
Set a lower intensity value: Try adding "-i 5" to the command line.
Thank you, already found working setup: -i 10
Radeon 290X, about 220 S/s. ASUS HD7970 DCII about 155 S/s
Software and cards are at stock settings. Four hours of continuous operation. "Stale" rate is much lower than v5.0.
Over all impact of upgrade from v4 to v6 for 3ea of these cards is that hash rate went up 30% and power consumption went up 10%.
Software and cards are at stock settings. Four hours of continuous operation. "Stale" rate is much lower than v5.0.
Over all impact of upgrade from v4 to v6 for 3ea of these cards is that hash rate went up 30% and power consumption went up 10%.
where can i download the windows version?
Are you using a different kernel than Silentarmy?
Yes, it is completely different code.
Got OpenCL Error: Enqueue Middle Round 7 Failed!
Claymore V8 runs just fine on this config.
How to fix?
Claymore V8 runs just fine on this config.
How to fix?
Set a lower intensity value: Try adding "-i 5" to the command line.
Jump to: