Finally it runs
intensity = 10
4*RX 480 8 GB 1280/2100 gpu/mem.
400-404 I/s total.
But Claymore V8 shows 800-810 H/s total and 50 W less power consumption on same settings.
Topic: Optiminer/Zcash v1.7 (GPU, Windows+Linux, AMD) - page 33. (Read 115948 times)
Are you using a different kernel than Silentarmy?
Version 0.6.0 has been release increasing hash rate by 20-30%!
https://github.com/Optiminer/OptiminerZcash
https://github.com/Optiminer/OptiminerZcash
Wow this thing flys (290s~200+), but unfortunately a gpu crashes every 10 minutes. Even setting intensity low eventually power seems to creep back up. Back to eth for now
You need to reduce the core frequency by 5 to 10 MHz. The new software will stress the GPU more than the old version.
Got OpenCL Error: Enqueue Middle Round 7 Failed!
Claymore V8 runs just fine on this config.
How to fix?
Claymore V8 runs just fine on this config.
How to fix?
Any numbers for sapphire nitro 480s.
Everything working like a charm! Optiminer, thank you!
Atm, for 3xNANO I can see:
Atm, for 3xNANO I can see:
Code:
2016-11-26 08:25:41,697 INFO [GPU2] 133.2 I/s 242.0 S/s (5s) 133.8 I/s 254.9 S/s (1m)
2016-11-26 08:25:41,767 INFO [GPU0] 134.4 I/s 251.8 S/s (5s) 134.0 I/s 248.7 S/s (1m)
2016-11-26 08:25:44,307 INFO [GPU1] 133.2 I/s 248.4 S/s (5s) 133.2 I/s 247.7 S/s (1m)
2016-11-26 08:25:46,330 INFO [Total] 402.0 I/s 747.6 S/s (5s) 400.9 I/s 751.3 S/s (1m)
2016-11-26 08:25:41,767 INFO [GPU0] 134.4 I/s 251.8 S/s (5s) 134.0 I/s 248.7 S/s (1m)
2016-11-26 08:25:44,307 INFO [GPU1] 133.2 I/s 248.4 S/s (5s) 133.2 I/s 247.7 S/s (1m)
2016-11-26 08:25:46,330 INFO [Total] 402.0 I/s 747.6 S/s (5s) 400.9 I/s 751.3 S/s (1m)
In 16.04 LTS, I had to run Optiminer from the root of extacted directory. Otherwise I got opencl device errors. I guess I would need to create a proper symlink.
Pretty neat. Thank you!
Pretty neat. Thank you!
I was getting 200 sols/s with my Nanos on v5. Now I'm getting 250 sol/s on v6, and these numbers are on the pool (effective hash rate based on shares submitted), not just the local miner log. The v6 version is getting more shares on the pool at 250 sols/s (in the miner log) than Claymore v8 does at 275 sols/s. Thank you @optiminer! 
Version 0.6.0 has been release increasing hash rate by 20-30%!
https://github.com/Optiminer/OptiminerZcash
https://github.com/Optiminer/OptiminerZcash
Wow this thing flys (290s~200+), but unfortunately a gpu crashes every 10 minutes. Even setting intensity low eventually power seems to creep back up. Back to eth for now
Great!
I am also getting about 170 S/s on ea RX 470 4gb, default bios and no mods.
Power use increased about 35-40W for four cards, which is still 5% below eth mining power use.
RX 470 4gb 170 S/s
R9 380 4gb 115 S/s
R7 370 4gb 103-104 S/s
I am also getting about 170 S/s on ea RX 470 4gb, default bios and no mods.
Power use increased about 35-40W for four cards, which is still 5% below eth mining power use.
RX 470 4gb 170 S/s
R9 380 4gb 115 S/s
R7 370 4gb 103-104 S/s
that's great testimony, will try it soon
Version 0.6.0 has been release increasing hash rate by 20-30%!
https://github.com/Optiminer/OptiminerZcash
https://github.com/Optiminer/OptiminerZcash
I can confirm looks promising. Much better than previous version. Not sure if v 6.0 is working smoothly. Need more time to check it as well. So far looks enough to compare it versus Claymore.
Speeds are competitive.
Great!
I am also getting about 170 S/s on ea RX 470 4gb, default bios and no mods.
Power use increased about 35-40W for four cards, which is still 5% below eth mining power use.
RX 470 4gb 170 S/s
R9 380 4gb 115 S/s
R7 370 4gb 103-104 S/s
I am also getting about 170 S/s on ea RX 470 4gb, default bios and no mods.
Power use increased about 35-40W for four cards, which is still 5% below eth mining power use.
RX 470 4gb 170 S/s
R9 380 4gb 115 S/s
R7 370 4gb 103-104 S/s
280x ~170sol/s
rx470 ~170sol/s
rx470 ~170sol/s
Version 0.6.0 has been release increasing hash rate by 20-30%!
https://github.com/Optiminer/OptiminerZcash
https://github.com/Optiminer/OptiminerZcash
How much for 280x?
Have you started working on Nvidia version?
Version 0.6.0 has been release increasing hash rate by 20-30%!
https://github.com/Optiminer/OptiminerZcash
https://github.com/Optiminer/OptiminerZcash
Version 0.5.0 has been released bringing additional 5-10% of hash rate!
First release that includes Windows!
First release that includes Windows!
Do you know the approx speed for a 280x?
140-150 sol
So the speed is lower than the Claymore's miner. I am wondering who is going to use this miner to mine.
I'm using it now that it has intensity control. Every zcash miner crashes my linux rig GPUs after mining less than 20 minutes but this one seems more stable now that I can lower intensity slightly.
Version 0.5.0 has been released bringing additional 5-10% of hash rate!
First release that includes Windows!
First release that includes Windows!
Do you know the approx speed for a 280x?
140-150 sol
So the speed is lower than the Claymore's miner. I am wondering who is going to use this miner to mine.
Version 5.0, for a R9 380 the hash rate maybe increases by about 5%.
The shares accepted number that is reported goes from about 100% to about 90%.
The shares accepted number that is reported goes from about 100% to about 90%.
Version 0.5.0 has been released bringing additional 5-10% of hash rate!
First release that includes Windows!
First release that includes Windows!
Do you know the approx speed for a 280x?
140-150 sol
Jump to: