Topic: Re: [ANN] Applecoin - Now on BTC38.com, Surpasses 5 Million Market Cap. - page 12. (Read 49900 times)
November 24, 2013, 04:11:15 AM
Mined 2 blocks in 5 hours with my 7770
November 24, 2013, 03:10:39 AM
Don't forget to vote for the Logo guys
http://applecoin.org/index.php?topic=36.0
Also, remember you can get additional Free coins simply by signing up to the forums.
Referral link below
http://applecoin.org/index.php?action=refferals;refferedby=21
Then simply go to this post, tell them Dr_Yan_Yan sent you, and you will get an extra 50(from Admin) + 50(from me) coins for Free!!
http://applecoin.org/index.php?topic=45.0
http://applecoin.org/index.php?topic=36.0
Also, remember you can get additional Free coins simply by signing up to the forums.
Referral link below
http://applecoin.org/index.php?action=refferals;refferedby=21
Then simply go to this post, tell them Dr_Yan_Yan sent you, and you will get an extra 50(from Admin) + 50(from me) coins for Free!!
http://applecoin.org/index.php?topic=45.0
November 24, 2013, 03:08:30 AM
Latest drivers (13.4+) have lower speed on scrypt-jane. Do not use it (tested with cards 7950)
12.6, 12.8, 12.10 drivers are much better (for scrypt jane)
P.S. ver. 13.1 I do not test.
12.6, 12.8, 12.10 drivers are much better (for scrypt jane)
P.S. ver. 13.1 I do not test.
November 23, 2013, 10:16:52 PM
Play around with the thread concurrency. 4096 gives me a solid 1.03 MH/s on a 5770.
ApplecoinMiner.exe --scrypt --Nfmin 4 --Nfmax 30 --StartT 1384720832 -o stratum+tcp://coin-base.org:3460 -u x.x -p x -I 20 --thread-concurrency 4096
If your gpu has 2gb of RAM try something like 10240 or so.
AU326tC6GuNnNDN4NRqas3QqCxyKn6CG2d
ApplecoinMiner.exe --scrypt --Nfmin 4 --Nfmax 30 --StartT 1384720832 -o stratum+tcp://coin-base.org:3460 -u x.x -p x -I 20 --thread-concurrency 4096
If your gpu has 2gb of RAM try something like 10240 or so.
AU326tC6GuNnNDN4NRqas3QqCxyKn6CG2d
November 23, 2013, 07:22:44 PM
ApplecoinMiner.exe --scrypt -u x -p x -o stratum+tcp://apcpool.dyndns.org:3333 --Nfmin 4 --Nfmax 30 --StartT 1384720832 -I 20
Only 1700 kb /s *3 Shapphire 7950 . Why?
Only 1700 kb /s *3 Shapphire 7950 . Why?
November 23, 2013, 06:49:19 PM
Just donated 5,000 APC to the Applecoin Fountain Project.
Lets see these give aways get cranking!
https://bitcointalksearch.org/topic/wanted-applecoin-fountain-125k-to-make-125k-to-give-away-342729
To: Applecoin Fountain Donate AbAtc2p4nbu3DyKxCyJWSQXs2PKTsNKoAu
Debit: -5000.00 APC
Transaction fee: -0.00001 APC
Net amount: -5000.00001 APC
Transaction ID: d95d8fb1998e480232b318daed10727e26df2b0d086a82fb6642cc254a5769eb
Lets see these give aways get cranking!
https://bitcointalksearch.org/topic/wanted-applecoin-fountain-125k-to-make-125k-to-give-away-342729
To: Applecoin Fountain Donate AbAtc2p4nbu3DyKxCyJWSQXs2PKTsNKoAu
Debit: -5000.00 APC
Transaction fee: -0.00001 APC
Net amount: -5000.00001 APC
Transaction ID: d95d8fb1998e480232b318daed10727e26df2b0d086a82fb6642cc254a5769eb
November 23, 2013, 06:16:09 PM
For all those that are having trouble with reduced Hashrates.
First I suggest trying to run Appleminer without ANY additional settings.
copy this to a .Bat file (change username and password)
applecoinminer -o stratum+tcp://apcpool.dyndns.org:3333 -u WORKERNAME -p PASSWORD --scrypt --Nfmin 4 --Nfmax 30 --StartT 1384720832 -I 15
just having the very base settings should still get you very good Hashrate.
Once you have it working there, then I suggest changing Scantime to maybe 10 seconds
and you can go through tweaking your other settings.
But the thing i noticed was, if i tried to include too many settings from other GPU miners, my Hashrate dropped heaps!
First I suggest trying to run Appleminer without ANY additional settings.
copy this to a .Bat file (change username and password)
applecoinminer -o stratum+tcp://apcpool.dyndns.org:3333 -u WORKERNAME -p PASSWORD --scrypt --Nfmin 4 --Nfmax 30 --StartT 1384720832 -I 15
just having the very base settings should still get you very good Hashrate.
Once you have it working there, then I suggest changing Scantime to maybe 10 seconds
and you can go through tweaking your other settings.
But the thing i noticed was, if i tried to include too many settings from other GPU miners, my Hashrate dropped heaps!
Exactly. That is why I keep the initial post to just the intensity. It can sometimes hinder rather than be productive with too many settings adjusted.
November 23, 2013, 06:13:27 PM
For all those that are having trouble with reduced Hashrates.
First I suggest trying to run Appleminer without ANY additional settings.
copy this to a .Bat file (change username and password)
applecoinminer -o stratum+tcp://apcpool.dyndns.org:3333 -u WORKERNAME -p PASSWORD --scrypt --Nfmin 4 --Nfmax 30 --StartT 1384720832 -I 15
just having the very base settings should still get you very good Hashrate.
Once you have it working there, then I suggest changing Scantime to maybe 10 seconds
and you can go through tweaking your other settings.
But the thing i noticed was, if i tried to include too many settings from other GPU miners, my Hashrate dropped heaps!
First I suggest trying to run Appleminer without ANY additional settings.
copy this to a .Bat file (change username and password)
applecoinminer -o stratum+tcp://apcpool.dyndns.org:3333 -u WORKERNAME -p PASSWORD --scrypt --Nfmin 4 --Nfmax 30 --StartT 1384720832 -I 15
just having the very base settings should still get you very good Hashrate.
Once you have it working there, then I suggest changing Scantime to maybe 10 seconds
and you can go through tweaking your other settings.
But the thing i noticed was, if i tried to include too many settings from other GPU miners, my Hashrate dropped heaps!
November 23, 2013, 06:05:08 PM
Windows with latest drivers.
November 23, 2013, 03:47:58 PM
What drivers use? windows or linux?
November 23, 2013, 03:43:07 PM
Did you want me to do up a logo?
November 23, 2013, 03:42:32 PM
Strange. I get 2.5Mhs on I-18 with a 6970
November 23, 2013, 02:35:43 PM
I tried with -I 20, and remains the same
It will error in sapphires??
It will error in sapphires??
November 23, 2013, 02:15:04 PM
My saphire 7950 get only 1700 kh/s Why?
Did you set intensity properly?
November 23, 2013, 02:14:04 PM
My saphire 7950 get only 1700 kh/s Why?
November 23, 2013, 02:05:58 PM
Getting 550khash on my 7770, not sure if that's correct?
November 23, 2013, 01:34:42 PM
try to raise intensity up to 20 (put "-I 20" in your .bat file) 
so, it will look like
applecoinminer -o stratum+tcp://apcpool.dyndns.org:3333 -u *********** -p ********* --scrypt --Nfmin 4 --Nfmax 30 --StartT 1384720832 -I 20
so, it will look like
applecoinminer -o stratum+tcp://apcpool.dyndns.org:3333 -u *********** -p ********* --scrypt --Nfmin 4 --Nfmax 30 --StartT 1384720832 -I 20
November 23, 2013, 01:30:08 PM
80 Kh/s is really slow indeed. Where are you mining with? I'm hitting the 5000 kh/s with a single HD 7950 GPU.
If that hashrate is correct, it's way too low to mine Applecoin in my opinion. Join a pool like http://apcpool.dyndns.org/. It's working great! It has 186kh/s now.
If that hashrate is correct, it's way too low to mine Applecoin in my opinion. Join a pool like http://apcpool.dyndns.org/. It's working great! It has 186kh/s now.
5000 kh/s with a single HD 7950 GPU? what is your setup??
November 23, 2013, 01:13:05 PM
Well, now I'm trying the pool and keep getting JSON errors no matter if I use appleminer or cgmner. uugh...
I do have the ports open on my firewall, not sure what else to check though.
I do have the ports open on my firewall, not sure what else to check though.
November 23, 2013, 12:44:53 PM
80 Kh/s is really slow indeed. Where are you mining with? I'm hitting the 5000 kh/s with a single HD 7950 GPU.
If that hashrate is correct, it's way too low to mine Applecoin in my opinion. Join a pool like http://apcpool.dyndns.org/. It's working great! It has 186kh/s now.
If that hashrate is correct, it's way too low to mine Applecoin in my opinion. Join a pool like http://apcpool.dyndns.org/. It's working great! It has 186kh/s now.
5000 kh/s with a single HD 7950 GPU? what is your setup??
This is scrypt-jane, so 5-6.5 Mh/s are ok for non-OC 7950
Jump to: