Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 13. (Read 104895 times)

newbie
Activity: 3
Merit: 0
Hey marto,

whats about my refund?
I have send to you 4 broken miners of hex16a2 and one broken miner of hex16b.
Nothing is come back to me, no money, no info, no miner or everything...
My Order was UTIXNTPOQ and LQLIFOWSL
newbie
Activity: 2
Merit: 0
Got my January shipment hardware 3 days ago, ordered it in December. I was quite sceptical about other users comments about delivery, but I received the stuff in time. Thanks Marto!
tmu
newbie
Activity: 59
Merit: 0
Hi,

My boards arrived today, ordered 13-12-2013 (january delivery) shipped 31-1-2014, and delivered directly to home door 7-2-2014.

For tracking I found that if you took DPD tracking code from speedy and entered it to trackitonline.ru you could follow delivery reasonably well.

Sadly I am unable to test units until 14-2-2014  Embarrassed

Thank You marto74, communications are kind of "silent" or could I say absent  Wink but everything else is good.
I will order more  Smiley
newbie
Activity: 45
Merit: 0
as it can do with cgminer?
what I need to adjust where?
Forexample want at

ghash.io
btcguild.com
bitcoin.cz

work simultaneously
I have 7 HEX16A2 connected to MR3020

how do I do it exactly
for me it does not work


can I HEXMINER 2 or 3 start times and different pool register?
If I understand correctly
Yes it is possible to start 2 or 3 copies of HEXminer and to run 3 different boards as an example to mine in 3 different pools.
use cgminer with load balancing or/and quota dude Smiley
legendary
Activity: 1610
Merit: 1000
how do I do it exactly
for me it does not work


can I HEXMINER 2 or 3 start times and different pool register?
If I understand correctly
Yes it is possible to start 2 or 3 copies of HEXminer and to run 3 different boards as an example to mine in 3 different pools.
use cgminer with load balancing or/and quota dude Smiley
newbie
Activity: 45
Merit: 0
how do I do it exactly
for me it does not work


can I HEXMINER 2 or 3 start times and different pool register?
If I understand correctly
Yes it is possible to start 2 or 3 copies of HEXminer and to run 3 different boards as an example to mine in 3 different pools.
hero member
Activity: 728
Merit: 500
Feels like this thread needs a little balance. Wink

We placed a large order in December.

Shipping to Canada from Bulgaria has been a challenge but Martin tried multiple couriers at our request to try and speed up the process - irrespective of the increased cost at times.

Any issues we have had have always been dealt with in a fair manner - i admit it can take a little time sometimes.  Grin

In my experience of the Bitcoin hardware industry Martin provides a good service. I'm sure there is room for improvement but overall i'm happy and will be using Technobit again in the near future.


date of the payment

I have paid 581€ for order BJJNEKBIM (january shipment!) by bank wire on 30-12-3013 from account number NL89RABO0368044971.

Will you include a replacement for the broken HEX16a2 from order WVEFURYEA? I will gladly ship the broken miner back to you if you provide a shipping address.

Please please please let me know something!!! The site still says awaiting payment and I  would really like to know what you want me to do with the broken miner.

If you have not received money I need to put claim with my bank before the end of the month

Thanks Marto & co!


I agree they probably try their best but I have now been waiting a month to get a bank transfer confirmed and I have a miner that broke ~10 days after delivery I am being very polite and marto asked for a screenshot of my internet banking and I sent it, nothing since then. It's just frustrating that people who complain loudly seem to get more customer service then people who stay polite and wait for their response Sad. This is starting to cost me real mining time Sad.

OK this is starting to get ridiculous I have one broken miner and 581€ for another order that were sent to you over a month ago and you have not even confirmed receiving the money!!!!
Look
I went trough all bank statments since 30-12-13 till now again.
There is no incoming payment either with your order ref or Your Name that is given with the order.
This is checked and double checked at least 5 times

Best Martin
hero member
Activity: 728
Merit: 500

marto74, please complete my order IOEKQNSIS. I've paid for hosting and setup too. You told me it would be ready in previous week...  Sad  Sad  Sad


Sorry for the delay.
You'll get your hosting setup tommorow
sr. member
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
Feels like this thread needs a little balance. Wink

We placed a large order in December.

Shipping to Canada from Bulgaria has been a challenge but Martin tried multiple couriers at our request to try and speed up the process - irrespective of the increased cost at times.

Any issues we have had have always been dealt with in a fair manner - i admit it can take a little time sometimes.  Grin

In my experience of the Bitcoin hardware industry Martin provides a good service. I'm sure there is room for improvement but overall i'm happy and will be using Technobit again in the near future.


date of the payment

I have paid 581€ for order BJJNEKBIM (january shipment!) by bank wire on 30-12-3013 from account number NL89RABO0368044971.

Will you include a replacement for the broken HEX16a2 from order WVEFURYEA? I will gladly ship the broken miner back to you if you provide a shipping address.

Please please please let me know something!!! The site still says awaiting payment and I  would really like to know what you want me to do with the broken miner.

If you have not received money I need to put claim with my bank before the end of the month

Thanks Marto & co!


I agree they probably try their best but I have now been waiting a month to get a bank transfer confirmed and I have a miner that broke ~10 days after delivery I am being very polite and marto asked for a screenshot of my internet banking and I sent it, nothing since then. It's just frustrating that people who complain loudly seem to get more customer service then people who stay polite and wait for their response Sad. This is starting to cost me real mining time Sad.

OK this is starting to get ridiculous I have one broken miner and 581€ for another order that were sent to you over a month ago and you have not even confirmed receiving the money!!!!
hero member
Activity: 822
Merit: 1002

marto74, please complete my order IOEKQNSIS. I've paid for hosting and setup too. You told me it would be ready in previous week...  Sad  Sad  Sad

newbie
Activity: 32
Merit: 0
I just want to share some images of the miners that just arrived. I got two packages because I ordered 3 miner at first and two days later decided to get another one.

Package is tight and secure on the outside:
https://i.imgur.com/8Bx2OJj.jpg

The inside also looks tight an secure:
https://i.imgur.com/hPwOaxF.jpg

I am glad customs did not look at this. USD 9.20 is way too low ... in Germany you have to pay about 100-150 eur if you cheat at customs and get caught.
https://i.imgur.com/NtcgK0h.jpg

That's how they look. Thank god they all have molex.
https://i.imgur.com/utS1eWp.jpg

Done my homework and went on a shopping spree. That's what is needed to get them working quietly
https://i.imgur.com/JAunAxn.jpg
newbie
Activity: 32
Merit: 0
Just to give you more information how an order of 4 Hex 16A2 worked out for me

Order for January batch placed 2013-12-08
2014-01-31 12:53:42   Shipped
2013-12-13 02:12:15   Payment accepted
2013-12-08 23:47:50   Awaiting bank wire payment

This was the speedy tracking
Date   Operation   Settlement
2014-01-31 16:26:05   Courier Pick-up   SOFIA
2014-01-31 19:15:08   Received in Office   SOFIA
2014-02-04 15:48:00   Arrival Scan   0918-Switzerland-3206
2014-02-05 08:06:00   Out for Delivery   0918-Switzerland-3206


They just arrived at my door step.
legendary
Activity: 1190
Merit: 1000
So i have to power the hub AND the MR with a molex conector from the same PSU as the HEX is powerd?

Yes, use one source of PSU to powered all of them. The easiest way is cut down the molex & original power supply plug  Grin
newbie
Activity: 15
Merit: 0
So i have to power the hub AND the MR with a molex conector from the same PSU as the HEX is powerd?
legendary
Activity: 1190
Merit: 1000
I have still the problem that 1 Miner over powerd USB-Hub works
and if i plugin the second Miner my PSU crashes.
Is there a problem with the USB-Hub Power? If have 4 Amps powersupply on the Hub.

BTW....
I use a TL-MR3020

Thanks for help

Do not use power supply that come with your hub. You should get the power from your PSU, including the TL-MR3020.
newbie
Activity: 15
Merit: 0
I have still the problem that 1 Miner over powerd USB-Hub works
and if i plugin the second Miner my PSU crashes.
Is there a problem with the USB-Hub Power? If have 4 Amps powersupply on the Hub.

BTW....
I use a TL-MR3020

Thanks for help
sr. member
Activity: 264
Merit: 250
derp
member
Activity: 118
Merit: 10
Marto you are my hero!!
01.02.2014 (Saturday) status change to shipped
04.02.2014 (today Tuesday) i got the miner!!

and i take DPD standard Smiley
Thanks very much!


how long must i wait, when i order 2~3x 260 GH miner?
also 3 month?
newbie
Activity: 32
Merit: 0
I have a question for the users who have already gotten their products:
how long does it take until you got your trackingcode for DPD-website.
Once the status has changed to Shipped?

I got my tracking code immediately after I received the shipping email. The tracking code worked fine; I just googled for "dpd speedy tracking". But it says on the speedy site that tracking information may not be up to date.
legendary
Activity: 1190
Merit: 1000
Hi

Can anyone help me please.

I am useing windows 7

I have a MR3020 that I have flashed and I think I have working with 2 HEX16A2's

How would I go about geting the CGminer window open so I can see hash rate?

Also I keep geting this on one of the boards

[STATS0] =>
(
   [STATS] => 0
   [ID] => HEXc0
   [Enabled] => N
   [Status] => Alive
   [Elapsed] => 296
   [MHS 5s] => 0.000
   [MHS av] => 0.000
   [Hardware Errors] => 0
   [Hardware Errors%] => 0.0000
   [USB Read Errors] => 0
   [USB Write Errors] => 1
   [Idled for 60 sec] => 0
   [Reset Count] => 0
   [Last Share Time] => 0
   [Chip Count] => 16
   [Frequency] => 1500
   [Core Voltage] => 1100
   [PIC Voltage Readings] => 1100
   [Chip1 Nonces] => 0
   [Chip1 Dupes] => 0
   [Chip2 Nonces] => 0
   [Chip2 Dupes] => 0
   [Chip3 Nonces] => 0
   [Chip3 Dupes] => 0
   [Chip4 Nonces] => 0
   [Chip4 Dupes] => 0
   [Chip5 Nonces] => 0
   [Chip5 Dupes] => 0
   [Chip6 Nonces] => 0
   [Chip6 Dupes] => 0
   [Chip7 Nonces] => 0
   [Chip7 Dupes] => 0
   [Chip8 Nonces] => 0
   [Chip8 Dupes] => 0
   [Chip9 Nonces] => 0
   [Chip9 Dupes] => 0
   [Chip10 Nonces] => 0
   [Chip10 Dupes] => 0
   [Chip11 Nonces] => 0
   [Chip11 Dupes] => 0
   [Chip12 Nonces] => 0
   [Chip12 Dupes] => 0
   [Chip13 Nonces] => 0
   [Chip13 Dupes] => 0
   [Chip14 Nonces] => 0
   [Chip14 Dupes] => 0
   [Chip15 Nonces] => 0
   [Chip15 Dupes] => 0
   [Chip16 Nonces] => 0
   [Chip16 Dupes] => 0

Any help please

I believe something like this happen to you


Just restart cgminer to clean the off miner stats. This is happen because of overheat(i guess).
Pages:
Jump to: