Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 10.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: tmu on February 16, 2014, 05:57:20 AM

Quote from: Zich on February 16, 2014, 05:27:42 AM

So you should be able to set the TL-MR3020 to static. It's true that the DHCP of the router is active, but thats not mean that you can't set your PC/TL-MR3020 to static address.
What is your laptop IP right now?

Almost feel bit stupid Tongue

But main thing is that now it works.
So I checked my IP which is 192.168.10.xxx and GW 192.168.10.1
I was confused by Inteno manual which said that Inteno is in 192.168.1.1

So now I am able to contact Inteno (I am bit surprised of this) and there I have DHCP-table pointing out my Tplink and RPi.

And now I can change (I think so) my TpLink and RPi to static with in subnet 10 with GW 192.168.10.1

Anyway now it's in order Cheesy

Everyday when You learn something new is a good Day

Nice

It's recommended to set the TL-MR3020 & pi to static address Wink

tmu

newbie

Activity: 59

Merit: 0

Quote from: Zich on February 16, 2014, 05:27:42 AM

So you should be able to set the TL-MR3020 to static. It's true that the DHCP of the router is active, but thats not mean that you can't set your PC/TL-MR3020 to static address.
What is your laptop IP right now?

Almost feel bit stupid Tongue

But main thing is that now it works.
So I checked my IP which is 192.168.10.xxx and GW 192.168.10.1
I was confused by Inteno manual which said that Inteno is in 192.168.1.1

So now I am able to contact Inteno (I am bit surprised of this) and there I have DHCP-table pointing out my Tplink and RPi.

And now I can change (I think so) my TpLink and RPi to static with in subnet 10 with GW 192.168.10.1

Anyway now it's in order Cheesy

Everyday when You learn something new is a good Day

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: tmu on February 16, 2014, 05:12:05 AM

Quote from: Zich on February 15, 2014, 09:04:50 PM

And tell us how exactly you connect to internet, you devices(modem,router,hub,switch)?

Hi,

I have TpLink is connected to LinkSys EF4116 16port switch and that is connected to Inteno FG500 (model is determined by google picture shearch).
Inteno is property of my ISP and it is located in my basement, it is locked so that I can not change any settings on it.

My problem is that TpLink and also my Raspberry pi (with couple of yellow jackets) are not accessible when connected as stated.
When I plug those directly to my laptop I can connect (putty) to those, but when online can't find those.

They are hashing okei, but I can't view status or change setting without unplugging them from internet and connecting to my laptop Undecided

Pick a dum eight port socho switch
Connect all your minig gear + laptop to it
Pick a wire which has internet and connect it there also. The chance for your and minig stuff not to have internet is low most probably it would be ok
They have some kind of port isolation on your way

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: tmu on February 16, 2014, 05:12:05 AM

Quote from: Zich on February 15, 2014, 09:04:50 PM

And tell us how exactly you connect to internet, you devices(modem,router,hub,switch)?

Hi,

I have TpLink is connected to LinkSys EF4116 16port switch and that is connected to Inteno FG500 (model is determined by google picture shearch).
Inteno is property of my ISP and it is located in my basement, it is locked so that I can not change any settings on it.

My problem is that TpLink and also my Raspberry pi (with couple of yellow jackets) are not accessible when connected as stated.
When I plug those directly to my laptop I can connect (putty) to those, but when online can't find those.

They are hashing okei, but I can't view status or change setting without unplugging them from internet and connecting to my laptop Undecided

So you should be able to set the TL-MR3020 to static. It's true that the DHCP of the router is active, but thats not mean that you can't set your PC/TL-MR3020 to static address.
What is your laptop IP right now?

tmu

newbie

Activity: 59

Merit: 0

Quote from: Zich on February 15, 2014, 09:04:50 PM

And tell us how exactly you connect to internet, you devices(modem,router,hub,switch)?

Hi,

I have TpLink is connected to LinkSys EF4116 16port switch and that is connected to Inteno FG500 (model is determined by google picture shearch).
Inteno is property of my ISP and it is located in my basement, it is locked so that I can not change any settings on it.

My problem is that TpLink and also my Raspberry pi (with couple of yellow jackets) are not accessible when connected as stated.
When I plug those directly to my laptop I can connect (putty) to those, but when online can't find those.

They are hashing okei, but I can't view status or change setting without unplugging them from internet and connecting to my laptop Undecided

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: tmu on February 15, 2014, 10:28:57 AM

I finally got my boards hashing.
Only problem I am having is that due my ISP i have to use dhcp and i am having difficulties to login to tplink.
I can login when tplink is connected directly to my laptop and i can make settings, but when tplink is connected to swicht i can not connect to it.
Any how hashing is showing up on my pools so everything seems to bee in order.

And tell us how exactly you connect to internet, you devices(modem,router,hub,switch)?

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: tmu on February 15, 2014, 10:28:57 AM

I finally got my boards hashing.
Only problem I am having is that due my ISP i have to use dhcp and i am having difficulties to login to tplink.
I can login when tplink is connected directly to my laptop and i can make settings, but when tplink is connected to swicht i can not connect to it.
Any how hashing is showing up on my pools so everything seems to bee in order.

Port based clan probably?
Is that in yor home? I guess not...
Post your PC IP address ad tplink Ip adders we can find a way for you to connect Wink

tmu

newbie

Activity: 59

Merit: 0

I finally got my boards hashing.
Only problem I am having is that due my ISP i have to use dhcp and i am having difficulties to login to tplink.
I can login when tplink is connected directly to my laptop and i can make settings, but when tplink is connected to swicht i can not connect to it.
Any how hashing is showing up on my pools so everything seems to bee in order.

Adamlm

hero member

Activity: 823

Merit: 1002

Quote from: WiWi on February 15, 2014, 01:33:15 AM

Hi all,

I am very satisfied, did order in december and its deliverd in february as agreed. The coming week it will arrive.
Good job from technobit.

Lucky you, my order is from 2013-12-09 and still not completed !
IOEKQNSIS

Marto, can you tell when it will be ready ??

WiWi

member

Activity: 83

Merit: 10

Hi all,

I am very satisfied, did order in december and its deliverd in february as agreed. The coming week it will arrive.
Good job from technobit.

cannachris

sr. member

Activity: 406

Merit: 250

cats love crypto | 911 truth @checktheevidence.com

Quote from: cannachris on February 11, 2014, 10:53:44 AM

OK I went to my bank and asked them to give me all possible information about the swift transaction. this is what they gave me:

This is everything the bank has on the 581€ transaction for order BJJNEKBIM

marto do you have enough information on the payment now???

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: mjniessen on February 13, 2014, 03:07:30 PM

Quote from: marto74 on February 13, 2014, 02:09:27 PM

this actually is transil.
to limit peeks from the PSU

Okay... but half of the chips aren't working properly

Quote

[Chip1 Nonces] => 242
[Chip2 Nonces] => 5
[Chip3 Nonces] => 0
[Chip4 Nonces] => 0
[Chip5 Nonces] => 0
[Chip6 Nonces] => 0
[Chip7 Nonces] => 0
[Chip8 Nonces] => 0
[Chip9 Nonces] => 1768
[Chip10 Nonces] => 1751
[Chip11 Nonces] => 969
[Chip12 Nonces] => 1748
[Chip13 Nonces] => 1769
[Chip14 Nonces] => 1774
[Chip15 Nonces] => 1857
[Chip16 Nonces] => 1848

Is there something I can check/fix before this board is going back for repair?

I am afraid nothing else you can do.

mjniessen

newbie

Activity: 15

Merit: 0

Quote from: marto74 on February 13, 2014, 02:09:27 PM

this actually is transil.
to limit peeks from the PSU

Okay... but half of the chips aren't working properly

Quote

[Chip1 Nonces] => 242
[Chip2 Nonces] => 5
[Chip3 Nonces] => 0
[Chip4 Nonces] => 0
[Chip5 Nonces] => 0
[Chip6 Nonces] => 0
[Chip7 Nonces] => 0
[Chip8 Nonces] => 0
[Chip9 Nonces] => 1768
[Chip10 Nonces] => 1751
[Chip11 Nonces] => 969
[Chip12 Nonces] => 1748
[Chip13 Nonces] => 1769
[Chip14 Nonces] => 1774
[Chip15 Nonces] => 1857
[Chip16 Nonces] => 1848

Is there something I can check/fix before this board is going back for repair?

Adamlm

hero member

Activity: 823

Merit: 1002

Quote from: marto74 on February 08, 2014, 03:41:01 AM

Quote from: Adamlm on February 08, 2014, 03:02:18 AM

Quote from: marto74 on February 05, 2014, 08:09:07 PM

Quote from: Adamlm on February 05, 2014, 11:36:57 AM

marto74, please complete my order IOEKQNSIS. I've paid for hosting and setup too. You told me it would be ready in previous week... Sad

Sorry for the delay.
You'll get your hosting setup tommorow

Still no info from you... Sad

I'm getting really dissapointed Sad

Sorry,
We were very busy.
I'll try to sort this out this weekend

---

Quote from: marto74 on February 05, 2014, 08:09:07 PM

Quote from: Adamlm on February 05, 2014, 11:36:57 AM

marto74, please complete my order IOEKQNSIS. I've paid for hosting and setup too. You told me it would be ready in previous week... Sad

Sorry for the delay.
You'll get your hosting setup tommorow

---
Marto74, my order has not been completed yet, it's an order for miner & hosting from early December. You promised here in public that it would be ready last week.

marto74

hero member

Activity: 728

Merit: 500

this actually is transil.
to limit peeks from the PSU

mjniessen

newbie

Activity: 15

Merit: 0

Quote from: loshia on February 13, 2014, 07:39:24 AM

Quote from: mjniessen on February 13, 2014, 07:35:46 AM

Quote from: loshia on February 13, 2014, 07:27:17 AM

Bad...
Try different voltage/clocks start with lower values. if chips still do not work the bard is not working then.
Sorry to say that

Did that already (0,9V 1000 Hz for example) without the "cgminer-api stats" and they seem not willing to work properly (chip 1+2) or even at all (chip 3-8).

The best thing to do is to approach marto then. Do you have 12V molex connected i guess yes but it is just in case

Yes, 12 volts are connected via molex. But there is a diode right next to the molex connector, which is not shown on pictures. I guess it is to prevent damage in case of swapping plus and ground... and I guess the diode is in the right direction, but I'll check that when I'm back home...

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: mjniessen on February 13, 2014, 07:35:46 AM

Quote from: loshia on February 13, 2014, 07:27:17 AM

Bad...
Try different voltage/clocks start with lower values. if chips still do not work the bard is not working then.
Sorry to say that

Did that already (0,9V 1000 Hz for example) without the "cgminer-api stats" and they seem not willing to work properly (chip 1+2) or even at all (chip 3-8).

The best thing to do is to approach marto then. Do you have 12V molex connected i guess yes but it is just in case

mjniessen

newbie

Activity: 15

Merit: 0

Quote from: loshia on February 13, 2014, 07:27:17 AM

Bad...
Try different voltage/clocks start with lower values. if chips still do not work the bard is not working then.
Sorry to say that

Did that already (0,9V 1000 Hz for example) without the "cgminer-api stats" and they seem not willing to work properly (chip 1+2) or even at all (chip 3-8).

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: mjniessen on February 13, 2014, 07:24:33 AM

Quote from: loshia on February 13, 2014, 06:01:43 AM

Ok. Just in case you missed that as far as i can see you are running custom build of cgminer Right?
if yes ssh is familiar and cgminer api-listen also? If not something more than a copy paste of compile instructions is needed which is called tp-link. In any case a little bit of reading about cgminer in general is a good start
Anyway type cgminer-api stats under ssh console. Is that hard?

That was helpfull...

Here the output of cgminer-api stats. Ehm... I switched of the PSU yesterday and cgminer keept running, so don't wonder about [MHS av].

Chip 3 to 8 with Nonces = 0

Bad...
Try different voltage/clocks start with lower values. if chips still do not work the bard is not working then.
Sorry to say that

mjniessen

newbie

Activity: 15

Merit: 0

Quote from: loshia on February 13, 2014, 06:01:43 AM

Ok. Just in case you missed that as far as i can see you are running custom build of cgminer Right?
if yes ssh is familiar and cgminer api-listen also? If not something more than a copy paste of compile instructions is needed which is called tp-link. In any case a little bit of reading about cgminer in general is a good start
Anyway type cgminer-api stats under ssh console. Is that hard?

That was helpfull...

Here the output of cgminer-api stats. Ehm... I switched of the PSU yesterday and cgminer keept running, so don't wonder about [MHS av].

Chip 3 to 8 with Nonces = 0

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 10. (Read 104920 times)