Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 11. (Read 104884 times)

legendary
Activity: 1190
Merit: 1000
I have ordered from the 30' piece hex8 with the better express shipping, this shipping was 46 euro. But my package is still in sofia soon 2 days. . Why is this express delivery? For more price i want much more speed ^^ i know very well that technobit cannot do anything with this, but i want answers. The shipping destination is hungary.

Shipment number: 60074379593  (DPD Parcel Label No: 16602410229650)
Date   Operation   Settlement
2014-02-11 18:32:14   Courier Pick-up   SOFIA
2014-02-11 19:23:32   Received in Office   SOFIA
* A delay in the shipment status update may be expected for international deliveries.

Before this i have hex8a2 ordered with regurar shipping and was 4day:
Shipment number: 60067117726  (DPD Parcel Label No: 16602410220681)
Date   Operation   Settlement
2014-01-10 17:34:22   Courier Pick-up   SOFIA
2014-01-10 18:13:45   Received in Office   SOFIA
2014-01-10 19:47:28   Processed in Office   0068-Sofia, BULGARIA
2014-01-13 08:27:17   Processed in Office   0066-Budapest, HUNGARY
2014-01-14 06:23:27   Arrival Scan   1657-Kapuvar, HUNGARY
2014-01-14 07:02:04   Out for Delivery   1657-Kapuvar, HUNGARY
2014-01-14 12:13:27   Delivered
Recipient RAJCI   1657-Kapuvar, HUNGARY
* A delay in the shipment status update may be expected for international deliveries

When the hex8 not arrive in this week, i fall from many btc..

Actually you can ask speedy the real status of your parcel. I ask them everyday  Cheesy
legendary
Activity: 1610
Merit: 1000
Dude,
just click cgminer stats in your tplink and post it here
much more easy thing compared to looking int6o source code

Actually there is no "your tplink", but there will be one next week and THEN I will dedicate you my first click/cgminer-api output.  Wink
What is more easier and what's not, depends in this case on my profession... I'm neighter a "clicker" nor a priest, who is seeing things that aren't there.  Grin
Ok. Just in case you missed that as far as i can see you are running custom build of cgminer Right?
if yes ssh is familiar and cgminer api-listen also? If not something more than a copy paste of compile instructions is needed which is called tp-link. In any case a little bit of reading about cgminer in general is a good start
Anyway type cgminer-api stats under ssh console. Is that hard?
newbie
Activity: 15
Merit: 0
Dude,
just click cgminer stats in your tplink and post it here
much more easy thing compared to looking int6o source code

Actually there is no "your tplink", but there will be one next week and THEN I will dedicate you my first click/cgminer-api output.  Wink
What is more easier and what's not, depends in this case on my profession... I'm neighter a "clicker" nor a priest, who is seeing things that aren't there.  Grin
full member
Activity: 237
Merit: 100
I have ordered from the 30' piece hex8 with the better express shipping, this shipping was 46 euro. But my package is still in sofia soon 2 days. . Why is this express delivery? For more price i want much more speed ^^ i know very well that technobit cannot do anything with this, but i want answers. The shipping destination is hungary.

Shipment number: 60074379593  (DPD Parcel Label No: 16602410229650)
Date   Operation   Settlement
2014-02-11 18:32:14   Courier Pick-up   SOFIA
2014-02-11 19:23:32   Received in Office   SOFIA
* A delay in the shipment status update may be expected for international deliveries.

Before this i have hex8a2 ordered with regurar shipping and was 4day:
Shipment number: 60067117726  (DPD Parcel Label No: 16602410220681)
Date   Operation   Settlement
2014-01-10 17:34:22   Courier Pick-up   SOFIA
2014-01-10 18:13:45   Received in Office   SOFIA
2014-01-10 19:47:28   Processed in Office   0068-Sofia, BULGARIA
2014-01-13 08:27:17   Processed in Office   0066-Budapest, HUNGARY
2014-01-14 06:23:27   Arrival Scan   1657-Kapuvar, HUNGARY
2014-01-14 07:02:04   Out for Delivery   1657-Kapuvar, HUNGARY
2014-01-14 12:13:27   Delivered
Recipient RAJCI   1657-Kapuvar, HUNGARY
* A delay in the shipment status update may be expected for international deliveries

When the hex8 not arrive in this week, i fall from many btc..
legendary
Activity: 1610
Merit: 1000

HEX16A can not OC that high. Unfortunately cgminer-api command only work on TPLINK TL-MR3020. I suggest you buy one on your local computer shop & flash it with latest image from technobit. It's pretty cheap.
Then using cgminer-api we can determine whenever there is dead chip or not.

That's what I'll do... Haven't found any working "per chip stats source code". The API of cgminer itself is delivering only totals.

Didn't want to say "that IS a HEX16A" but "the preformance is more LIKE a HEX16A".

The schematic available in opening page of this thread Smiley

Ups... Cool!
Thx!
Dude,
just click cgminer stats in your tplink and post it here
much more easy thing compared to looking int6o source code
newbie
Activity: 15
Merit: 0

HEX16A can not OC that high. Unfortunately cgminer-api command only work on TPLINK TL-MR3020. I suggest you buy one on your local computer shop & flash it with latest image from technobit. It's pretty cheap.
Then using cgminer-api we can determine whenever there is dead chip or not.

That's what I'll do... Haven't found any working "per chip stats source code". The API of cgminer itself is delivering only totals.

Didn't want to say "that IS a HEX16A" but "the preformance is more LIKE a HEX16A".

The schematic available in opening page of this thread Smiley

Ups... Cool!
Thx!
legendary
Activity: 1190
Merit: 1000
My 24 GH/s HEX16A2 fully Assembled bitcoin miner (chips included) (Order No. CVMKAARFU) is not making half the hash rate, which should be reached (over clocked). What went wrong?

Quote
HEXc 0: 1500 1100/1103mV | 11.00G/11.17Gh/s | A:1120 R:0 HW:21/2.05% WU:156.0/m

With HexMiner 1.0.0.3 and this settings I also got a hash rate of a well over clocked 7 GH/s HEX16A miner... (avg ~8.78 Gh/s) That's extremely disappointing!
All 16 chips get warm/hot and seem to be soldered well, the PSU is okay and I'm not using any router hardware with a web interface or any helpful "cgminer-api".

Are there any schematics available? Does anyone have another idea or (much better) a solution for my issue?

HEX16A can not OC that high. Unfortunately cgminer-api command only work on TPLINK TL-MR3020. I suggest you buy one on your local computer shop & flash it with latest image from technobit. It's pretty cheap.
Then using cgminer-api we can determine whenever there is dead chip or not.

The schematic available in opening page of this thread Smiley


newbie
Activity: 15
Merit: 0
My 24 GH/s HEX16A2 fully Assembled bitcoin miner (chips included) (Order No. CVMKAARFU) is not making half the hash rate, which should be reached (over clocked). What went wrong?

Quote
HEXc 0: 1500 1100/1103mV | 11.00G/11.17Gh/s | A:1120 R:0 HW:21/2.05% WU:156.0/m

With HexMiner 1.0.0.3 and this settings I also got a hash rate of a well over clocked 7 GH/s HEX16A miner... (avg ~8.78 Gh/s) That's extremely disappointing!
All 16 chips get warm/hot and seem to be soldered well, the PSU is okay and I'm not using any router hardware with a web interface or any helpful "cgminer-api".

Are there any schematics available? Does anyone have another idea or (much better) a solution for my issue?
member
Activity: 77
Merit: 10
Hi guys,

I had 3 HEX16A2 boards and gave them to a friend of mine.
Now a have a spare be quiet! BQT E9 Straight Power 700W PSU and I was wondering if anyone could need it.
Cheaper than a new one of course, I bought it on december 23rd.
legendary
Activity: 1610
Merit: 1000
That not possible. What is your PSU & how many board connected to the PSU?

My PSU is a "be quiet! Pure Power L8 350W". It supports up to 15 amps on +5V and 27 amps on +12V - which should be more than enough for one board only. I'm not using a TP-Link with a ready-made image, so I have to figure out what exactly "cgminer-api" is generating to post a similar output. The cgminer-3.11.0 has been patched and compiled by myself - according to other "success stories" on the net.
[/quote]
just click next tab to cgminer-configuration in the web  Smiley and post the output
newbie
Activity: 15
Merit: 0
That not possible. What is your PSU & how many board connected to the PSU?
[/quote]

My PSU is a "be quiet! Pure Power L8 350W". It supports up to 15 amps on +5V and 27 amps on +12V - which should be more than enough for one board only. I'm not using a TP-Link with a ready-made image, so I have to figure out what exactly "cgminer-api" is generating to post a similar output. The cgminer-3.11.0 has been patched and compiled by myself - according to other "success stories" on the net.
legendary
Activity: 1190
Merit: 1000

The chip will hash at slower speed or not hash at all if too low or too high.
Sometimes i accidentally  set the frequency to 150  Roll Eyes after flash new image to TL-MR3020

I know... but with --hexminerc-options 16:1500 the hash rate is still too low (~10GH/s)! Sad

How should the chips be labeled? Perhaps I got the right Board (dmesg says so) with the wrong chips...

That not possible. What is your PSU & how many board connected to the PSU?

legendary
Activity: 1610
Merit: 1000

The chip will hash at slower speed or not hash at all if too low or too high.
Sometimes i accidentally  set the frequency to 150  Roll Eyes after flash new image to TL-MR3020

I know... but with --hexminerc-options 16:1500 the hash rate is still too low (~10GH/s)! Sad

How should the chips be labeled? Perhaps I got the right Board (dmesg says so) with the wrong chips...
dude,
check cgminer-api and post the output...
newbie
Activity: 15
Merit: 0

The chip will hash at slower speed or not hash at all if too low or too high.
Sometimes i accidentally  set the frequency to 150  Roll Eyes after flash new image to TL-MR3020

I know... but with --hexminerc-options 16:1500 the hash rate is still too low (~10GH/s)! Sad

How should the chips be labeled? Perhaps I got the right Board (dmesg says so) with the wrong chips...
legendary
Activity: 1190
Merit: 1000
Quote
Hi,

I see that you set a little low frequency while run command:
Code:
--hexminerc-options 16:1000

The right command is:
Code:
--hexminerc-options 16:1500

Though i find it weird that your cgminer show frequency set at 1500  Roll Eyes

Ups... that was my fault. I checked, what happened on a lower frequency and a lower voltage.

The chip will hash at slower speed or not hash at all if too low or too high.
Sometimes i accidentally  set the frequency to 150  Roll Eyes after flash new image to TL-MR3020
newbie
Activity: 15
Merit: 0
Quote
Hi,

I see that you set a little low frequency while run command:
Code:
--hexminerc-options 16:1000

The right command is:
Code:
--hexminerc-options 16:1500

Though i find it weird that your cgminer show frequency set at 1500  Roll Eyes

Ups... that was my fault. I checked, what happened on a lower frequency and a lower voltage.
legendary
Activity: 1190
Merit: 1000
I've no cgminer-API extra, but it seems that only one row is active. After restarting cgminer (with --api-listen) is showing me
Quote
HEXc 0: 1500 1100/1100mV | OFF   / 0.000h/s | A:  0 R:0 HW:0/0.00% WU:  0.0/m
HEXc 1: 1500 1100/1103mV | 10.64G/9.760Gh/s | A:448 R:0 HW:8/1.99% WU:136.4/m

I'm starting with --hexminerc-options 16:1000 --hexminerc-voltage 1100 --set_default_to_c --api-listen do I need to add something to activate the second HEXc?

Edit: The secondary HEXc disappeared again... :-(


Hi,

I see that you set a little low frequency while run command:
Code:
--hexminerc-options 16:1000

The right command is:
Code:
--hexminerc-options 16:1500

Though i find it weird that your cgminer show frequency set at 1500  Roll Eyes
newbie
Activity: 17
Merit: 0


Martin you fucking scammer ,

what about my order QNNEYUNAT  , you receive my payment of about 2112€ early December and till yet no Delivery,

I want my money refund you scammer , you are stolen my money

I send you my paypal account by PM and of course no Answer - by your fucking company normally situation

I know you see this forum many time a day and I promise you I make your business and company as a scammer and fucking person and you can't make any business in this Forum - you are persona non grata

Give me my money you fucking scammer


newbie
Activity: 15
Merit: 0
I've no cgminer-API extra, but it seems that only one row is active. After restarting cgminer (with --api-listen) is showing me
Quote
HEXc 0: 1500 1100/1100mV | OFF   / 0.000h/s | A:  0 R:0 HW:0/0.00% WU:  0.0/m
HEXc 1: 1500 1100/1103mV | 10.64G/9.760Gh/s | A:448 R:0 HW:8/1.99% WU:136.4/m

I'm starting with --hexminerc-options 16:1500 --hexminerc-voltage 1100 --set_default_to_c --api-listen do I need to add something to activate the second HEXc?

Edit: The secondary HEXc disappeared again... :-(
Edit^2: fixed frequency in command-line
legendary
Activity: 1610
Merit: 1000
My 24 GH/s HEX16A2 fully Assembled bitcoin miner (chips included) (Order No. CVMKAARFU) is not making half the hash rate, which should be reached (over clocked). What went wrong?

Quote
HEXc 0: 1500 1100/1103mV | 11.00G/11.17Gh/s | A:1120 R:0 HW:21/2.05% WU:156.0/m

Chimner-API stats small letters only?
Pages:
Jump to: