Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 14. (Read 104884 times)

full member
Activity: 237
Merit: 100
I got a tracking number. It was 3day from bulgari to hungary shipping.
The tracking number can you see on the website in order details.

I have a question for the users who have already gotten their products:
how long does it take until you got your trackingcode for DPD-website.
Once the status has changed to Shipped?

Never got a tracking code, got an e-mail, but the tracking bit was blank. My items shipped from Bulgaria to UK in about 5-7 days after the order system went from "payment accepted" to "shipped".
member
Activity: 118
Merit: 10
I have a question for the users who have already gotten their products:
how long does it take until you got your trackingcode for DPD-website.
Once the status has changed to Shipped?

Never got a tracking code, got an e-mail, but the tracking bit was blank. My items shipped from Bulgaria to UK in about 5-7 days after the order system went from "payment accepted" to "shipped".

thanks 4 info!
hero member
Activity: 490
Merit: 500

I have a MR3020 that I have flashed and I think I have working with 2 HEX16A2's

How would I go about geting the CGminer window open so I can see hash rate?


Use putty.exe to SSH into the IP address

Then log in as "root" and whatever password you set for the router

Then you type "screen -r"
hero member
Activity: 490
Merit: 500
I have a question for the users who have already gotten their products:
how long does it take until you got your trackingcode for DPD-website.
Once the status has changed to Shipped?

Never got a tracking code, got an e-mail, but the tracking bit was blank. My items shipped from Bulgaria to UK in about 5-7 days after the order system went from "payment accepted" to "shipped".
member
Activity: 118
Merit: 10
I have a question for the users who have already gotten their products:
how long does it take until you got your trackingcode for DPD-website.
Once the status has changed to Shipped?
member
Activity: 92
Merit: 10

How do you power boards?
make sure PSU fan is spinning and shortcut 24 Pin psu green and black
http://www.youtube.com/watch?v=6xLy8rZRjU8

If you have thermal type connector give them 12 volts  yellow black if molex just plug it. Boards need 12V power to hash


Both are pluged in to 12V power supply and both are working using HEX miner but only one when pluged into the router
newbie
Activity: 36
Merit: 0
The new patch for cgminer is very nice.
There is any solution to restart the USB device? All 6 device work nice for a while, then _random_ one or more device performance fall down drastic. I have tryed restart the cgminer, but this is no solution, they still work with low performance continue.
They dont work normal, until i unpower the boards.
I have hex16a2, MTT USB hub. Enough PSU power.
http://users.atw.hu/ifa/rpi/stats.txt
http://users.atw.hu/ifa/rpi/devs.txt
http://users.atw.hu/ifa/rpi/demsg.txt

Any idea?

same problem here, only solution was to turn 12v off for a short while. :-/
full member
Activity: 237
Merit: 100
The new patch for cgminer is very nice.
There is any solution to restart the USB device? All 6 device work nice for a while, then _random_ one or more device performance fall down drastic. I have tryed restart the cgminer, but this is no solution, they still work with low performance continue.
They dont work normal, until i unpower the boards.
I have hex16a2, MTT USB hub. Enough PSU power.
http://users.atw.hu/ifa/rpi/stats.txt
http://users.atw.hu/ifa/rpi/devs.txt
http://users.atw.hu/ifa/rpi/demsg.txt

Any idea?
full member
Activity: 237
Merit: 100
mudge!
[Enabled] => N
Ur device is disabled, dont know why. Try enable it.
legendary
Activity: 1610
Merit: 1000
Hi

Can anyone help me please.

I am useing windows 7

I have a MR3020 that I have flashed and I think I have working with 2 HEX16A2's

How would I go about geting the CGminer window open so I can see hash rate?

Also I keep geting this on one of the boards

[STATS0] =>
(
   [STATS] => 0
   [ID] => HEXc0
   [Enabled] => N
   [Status] => Alive
   [Elapsed] => 296
   [MHS 5s] => 0.000
   [MHS av] => 0.000
   [Hardware Errors] => 0
   [Hardware Errors%] => 0.0000
   [USB Read Errors] => 0
   [USB Write Errors] => 1
   [Idled for 60 sec] => 0
   [Reset Count] => 0
   [Last Share Time] => 0
   [Chip Count] => 16
   [Frequency] => 1500
   [Core Voltage] => 1100
   [PIC Voltage Readings] => 1100
   [Chip1 Nonces] => 0
   [Chip1 Dupes] => 0
   [Chip2 Nonces] => 0
   [Chip2 Dupes] => 0
   [Chip3 Nonces] => 0
   [Chip3 Dupes] => 0
   [Chip4 Nonces] => 0
   [Chip4 Dupes] => 0
   [Chip5 Nonces] => 0
   [Chip5 Dupes] => 0
   [Chip6 Nonces] => 0
   [Chip6 Dupes] => 0
   [Chip7 Nonces] => 0
   [Chip7 Dupes] => 0
   [Chip8 Nonces] => 0
   [Chip8 Dupes] => 0
   [Chip9 Nonces] => 0
   [Chip9 Dupes] => 0
   [Chip10 Nonces] => 0
   [Chip10 Dupes] => 0
   [Chip11 Nonces] => 0
   [Chip11 Dupes] => 0
   [Chip12 Nonces] => 0
   [Chip12 Dupes] => 0
   [Chip13 Nonces] => 0
   [Chip13 Dupes] => 0
   [Chip14 Nonces] => 0
   [Chip14 Dupes] => 0
   [Chip15 Nonces] => 0
   [Chip15 Dupes] => 0
   [Chip16 Nonces] => 0
   [Chip16 Dupes] => 0

Any help please
How do you power boards?
make sure PSU fan is spinning and shortcut 24 Pin psu green and black
http://www.youtube.com/watch?v=6xLy8rZRjU8

If you have thermal type connector give them 12 volts  yellow black if molex just plug it. Boards need 12V power to hash
full member
Activity: 210
Merit: 100
...
Where is my refund, you scammer? I ask for on 2013-12-10! I never received anything.
sr. member
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
date of the payment

I have paid 581€ for order BJJNEKBIM by bank wire on 30-12-3013 from account number NL89RABO0368044971.

Will you include a replacement for the broken HEX16a2 from order WVEFURYEA? I will gladly ship the broken miner back to you if you provide a shipping address.

Please please please let me know something!!! The site still says awaiting payment and I  would really like to know what you want me to do with the broken miner.

If you have not received money I need to put claim with my bank before the end of the month

Thanks Marto & co!


Still not hearing anything at all I now paid for my miner over a month ago the least you could do is confirm that you guys have received my payment and tell me what i should do with my  hex16a2 miner that broke after less than a week

Pease marto I am a poor student 581€ + the 660€ from the last order is a lot of money for me just let me know what's going on i sent you a screenshot from my internet banking and replied to your message here but after that I  hear nothing - this is stressing me out!

anyone? am I invisible?
member
Activity: 92
Merit: 10
Hi

Can anyone help me please.

I am useing windows 7

I have a MR3020 that I have flashed and I think I have working with 2 HEX16A2's

How would I go about geting the CGminer window open so I can see hash rate?

Also I keep geting this on one of the boards

[STATS0] =>
(
   [STATS] => 0
   [ID] => HEXc0
   [Enabled] => N
   [Status] => Alive
   [Elapsed] => 296
   [MHS 5s] => 0.000
   [MHS av] => 0.000
   [Hardware Errors] => 0
   [Hardware Errors%] => 0.0000
   [USB Read Errors] => 0
   [USB Write Errors] => 1
   [Idled for 60 sec] => 0
   [Reset Count] => 0
   [Last Share Time] => 0
   [Chip Count] => 16
   [Frequency] => 1500
   [Core Voltage] => 1100
   [PIC Voltage Readings] => 1100
   [Chip1 Nonces] => 0
   [Chip1 Dupes] => 0
   [Chip2 Nonces] => 0
   [Chip2 Dupes] => 0
   [Chip3 Nonces] => 0
   [Chip3 Dupes] => 0
   [Chip4 Nonces] => 0
   [Chip4 Dupes] => 0
   [Chip5 Nonces] => 0
   [Chip5 Dupes] => 0
   [Chip6 Nonces] => 0
   [Chip6 Dupes] => 0
   [Chip7 Nonces] => 0
   [Chip7 Dupes] => 0
   [Chip8 Nonces] => 0
   [Chip8 Dupes] => 0
   [Chip9 Nonces] => 0
   [Chip9 Dupes] => 0
   [Chip10 Nonces] => 0
   [Chip10 Dupes] => 0
   [Chip11 Nonces] => 0
   [Chip11 Dupes] => 0
   [Chip12 Nonces] => 0
   [Chip12 Dupes] => 0
   [Chip13 Nonces] => 0
   [Chip13 Dupes] => 0
   [Chip14 Nonces] => 0
   [Chip14 Dupes] => 0
   [Chip15 Nonces] => 0
   [Chip15 Dupes] => 0
   [Chip16 Nonces] => 0
   [Chip16 Dupes] => 0

Any help please
member
Activity: 118
Merit: 10
so to me it was enough times!
The infants should learn to read better times before any order something.
They believe you can get the Miner for cheap money ... They buy to let only the "work" mount chips ...

For Stupid buyer Technobit can not help it ...

again a new guy, someone from the wild who hasn't bought anything and waited this long.
:FACEPALM:, when will these kids learn anything to read the posts above before writing craps.

seriously stupid, this forum is now flooding from dumb members from day by day.

ohh i´m not wild or angry, i belive in Technobit!
But i cant understand the people, who buy only the "work" mount chips, and then the spam here in Forum scam and so thinks...

I think very much people buy here and only the stupid people who cant read spam here  Wink
hero member
Activity: 1246
Merit: 501
I bought a HEX16A2 used, and it was working fine for a few hours. 

Then I noticed it had stopped hashing.  There's no LEDs lit, it is being detected by cgminer on the MR-3020 but it doesn't do any hashing.

Any ideas?

Plugged the board in to the PC with HEXMiner, and it started working again.  Back on to the TPLink and it's still working a champ.
full member
Activity: 237
Merit: 100
The new patch for cgminer is very nice.
There is any solution to restart the USB device? All 6 device work nice for a while, then _random_ one or more device performance fall down drastic. I have tryed restart the cgminer, but this is no solution, they still work with low performance continue.
They dont work normal, until i unpower the boards.
I have hex16a2, MTT USB hub. Enough PSU power.
http://users.atw.hu/ifa/rpi/stats.txt
http://users.atw.hu/ifa/rpi/devs.txt
http://users.atw.hu/ifa/rpi/demsg.txt
newbie
Activity: 32
Merit: 0

I do not seem to get it right. I did:

wget https://github.com/ckolivas/cgminer/archive/v3.11.0.tar.gz
tar xfz v3.11.0.tar.gz
cd cgminer-3.11.0/
wget https://www.dropbox.com/s/t1rgvsvd6qxjga5/b535bc08267aef90511afff23cb9ec48c4a6a704.patch
patch -p1 < b535bc08267aef90511afff23cb9ec48c4a6a704.patch
./autogen.sh --enable-avalon --enable-hexminerc
sudo make install

But I get this error when doing make install:

Quote
...
gminer-driver-hexminerc.o: In function `hexminerc_send_tasks':
/home/pi/cgminer-3.11.0/driver-hexminerc.c:174: undefined reference to `SHA256_K'
collect2: ld returned 1 exit status
make[1]: *** [cgminer] Error 1
make[1]: Leaving directory `/home/pi/cgminer-3.11.0'
make: *** [install-recursive] Error 1

Any ideas?
Use following command:

Code:
./autogen.sh --enable-hexminera --enable-hexminerc

Got it sorted out.

libhexc.c had to be patched too. This blog entry helped me to get on the right track: http://www.cberendt.de/2014/01/technobit-asics-with-cgminer-raspbian/
hero member
Activity: 1246
Merit: 501
I bought a HEX16A2 used, and it was working fine for a few hours. 

Then I noticed it had stopped hashing.  There's no LEDs lit, it is being detected by cgminer on the MR-3020 but it doesn't do any hashing.

Any ideas?
newbie
Activity: 21
Merit: 0

I do not seem to get it right. I did:

wget https://github.com/ckolivas/cgminer/archive/v3.11.0.tar.gz
tar xfz v3.11.0.tar.gz
cd cgminer-3.11.0/
wget https://www.dropbox.com/s/t1rgvsvd6qxjga5/b535bc08267aef90511afff23cb9ec48c4a6a704.patch
patch -p1 < b535bc08267aef90511afff23cb9ec48c4a6a704.patch
./autogen.sh --enable-avalon --enable-hexminerc
sudo make install

But I get this error when doing make install:

Quote
...
gminer-driver-hexminerc.o: In function `hexminerc_send_tasks':
/home/pi/cgminer-3.11.0/driver-hexminerc.c:174: undefined reference to `SHA256_K'
collect2: ld returned 1 exit status
make[1]: *** [cgminer] Error 1
make[1]: Leaving directory `/home/pi/cgminer-3.11.0'
make: *** [install-recursive] Error 1

Any ideas?
Use following command:

Code:
./autogen.sh --enable-hexminera --enable-hexminerc
newbie
Activity: 32
Merit: 0
Great news!
Please, give me answer:
Is there anything changed for Hex16A2? Duplicates? Chip0 bug?

New patch for cgminer 3.11.0 + TL-MR3020 image r39404  Download

or patch only b535bc08267aef90511afff23cb9ec48c4a6a704.patch

yes, no more duplicate(not send to pool) .
Chip 0 bug is gone  Grin

I do not seem to get it right. I did:

wget https://github.com/ckolivas/cgminer/archive/v3.11.0.tar.gz
tar xfz v3.11.0.tar.gz
cd cgminer-3.11.0/
wget https://www.dropbox.com/s/t1rgvsvd6qxjga5/b535bc08267aef90511afff23cb9ec48c4a6a704.patch
patch -p1 < b535bc08267aef90511afff23cb9ec48c4a6a704.patch
./autogen.sh --enable-avalon --enable-hexminerc
sudo make install

But I get this error when doing make install:

Quote
...
gminer-driver-hexminerc.o: In function `hexminerc_send_tasks':
/home/pi/cgminer-3.11.0/driver-hexminerc.c:174: undefined reference to `SHA256_K'
collect2: ld returned 1 exit status
make[1]: *** [cgminer] Error 1
make[1]: Leaving directory `/home/pi/cgminer-3.11.0'
make: *** [install-recursive] Error 1

Any ideas?
Pages:
Jump to: