Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 9. (Read 104895 times)

full member
Activity: 147
Merit: 100
member
Activity: 92
Merit: 10
Hello,
questions about HEX16A2 and litecoins:

Does Hex16A2 can mine litecoins? In other words, does HEX16A2 support SHA256 algorithm?
In case the answer is YES, how could I patch the last cgminer version 3.7.2 that supports --scrypt option in order to support HEXC miner?

Thank you in advance
Cristian
 

Does Hex16A2 can mine litecoins? No
In other words, does HEX16A2 support SHA256 algorithm? Yes
newbie
Activity: 4
Merit: 0
Hello,
questions about HEX16A2 and litecoins:

Does Hex16A2 can mine litecoins? In other words, does HEX16A2 support SHA256 algorithm?
In case the answer is YES, how could I patch the last cgminer version 3.7.2 that supports --scrypt option in order to support HEXC miner?

Thank you in advance
Cristian
 
legendary
Activity: 1190
Merit: 1000
Glad it work for you ZBC3  Smiley & don't worry about donation  Wink
sr. member
Activity: 361
Merit: 250
Zich,

Your RPi instructions are spot on. I followed them easily, and have been running without issues for 3 hours.
sr. member
Activity: 361
Merit: 250
Zich,

I'd send you a donation but it wouldn't be enough. I hope Marto74 knows how much we appreciate your assistance. Hopefully technobit can put you to first in line for whatever product they come out with next.
legendary
Activity: 1190
Merit: 1000
Zich,

Do you have the instructions for updating the tplink for use with the hex miner?

Thanks for your great detailed instructions.

Yes, i just finish posting the detail with picture  Smiley
https://bitcointalksearch.org/topic/how-to-upgrade-tplink-tl-mr3020-firmware-to-technobit-openwrt-476326
sr. member
Activity: 361
Merit: 250
Zich,

Do you have the instructions for updating the tplink for use with the hex miner?

Thanks for your great detailed instructions.
sr. member
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
Hey I saw my hex16b has finally shipped. Thanks marto! I'm never going to use bank wire again....

People beware! Bank wire orders to technobit can be in transit up to a month...
legendary
Activity: 1190
Merit: 1000
Zich,

Are you running avalon 2 boards on same tplink as the 6/8 board?

Do you have a version of cgminer for rpi that runs both boards?

Thanks in advance!

Yes, i run both on them on TL-MR3020  Grin

For pi, you need to compile cgminer using patch that available at technobit website.
The following guide is based on raspbian wheezy.

Code:
1. sudo aptitude update
2. sudo aptitude upgrade
3. sudo aptitude install libudev-dev libusb-1.0-0-dev libfox-1.6-dev
4. sudo aptitude install autotools-dev autoconf automake
5. sudo aptitude install libtool libncurses-dev yasm
6. sudo aptitude install curl libcurl4-openssl-dev libjansson-dev screen
7. sudo aptitude install pkg-config uthash-dev make git-core

Then download cgminer 3.12.3
Code:
1. git clone https://github.com/ckolivas/cgminer.git
2. mv cgminer cgminer-3.12.3
3. cd cgminer-3.12.3
4. git checkout e447b697d90c4d1e4c6a2dc8bd9bfc3eab23115f
5. wget https://www.dropbox.com/s/hfx7l4hz5ywgw3x/e447b697d90c4d1e4c6a2dc8bd9bfc3eab23115f.patch
6. patch -p1 < e447b697d90c4d1e4c6a2dc8bd9bfc3eab23115f.patch
7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8
8. make

Step 5 is patch uploaded to dropbox by myself, so you can use your own that downloaded from technobit download page if you want  Wink
Make sure there is no error message on each step.

No need to install, you can run cgminer from folder.
Code:
1. screen
2. sudo ./cgminer --hexminerc-voltage 1100 --hexminerc-options 16:1500 --hexminer8-set-diff-to-one 0 --hexminer8-chip-mask 255 --hexminer8-voltage 1005 --hexminer8-options 8:260 --set_default_to_8

Or add the setting to cgminer.conf so you don't have to type setting command each time  Cheesy
Code:
sudo nano /root/.cgminer/cgminer.conf

Code:
{
"pools" : [
        {
                "url" : "stratum+tcp://stratum-lb-usa48.btcguild.com:3333",
                "user" : "user",
                "pass" : "123"
        }
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1005",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_c" : true,
"kernel-path" : "/usr/local/bin"
}
sr. member
Activity: 361
Merit: 250
Zich,

Are you running avalon 2 boards on same tplink as the 6/8 board?

Do you have a version of cgminer for rpi that runs both boards?

Thanks in advance!
legendary
Activity: 1610
Merit: 1000
Damn You're fast.
Thanks it worked perfectly  Grin
The trick is to press ctr+a+d to quit screen session at the end
 
tmu
newbie
Activity: 59
Merit: 0
Damn You're fast.
Thanks it worked perfectly  Grin
legendary
Activity: 1610
Merit: 1000
I have again some questions  Huh
There are some screen shots of putty to TpLink?
Like one https://bitcointalksearch.org/topic/m.4889492
How could I contact my TpLink that way?
I am able to contact TpLink With putty, but how to get cgminer's screen  Huh
I am not so good with linux  Cry (yet)

you need a putty.exe for windows
start it
put your TP-link IP (192.168.0.99 as an example) in the conection box and CONNECT
when terminal window oppens
user: root
pass: [your password]  ( you have to set a pass in the web !!!)
then after logging in type : "screen -r"
that's it
+100 Wink
hero member
Activity: 728
Merit: 500
I have again some questions  Huh
There are some screen shots of putty to TpLink?
Like one https://bitcointalksearch.org/topic/m.4889492
How could I contact my TpLink that way?
I am able to contact TpLink With putty, but how to get cgminer's screen  Huh
I am not so good with linux  Cry (yet)

you need a putty.exe for windows
start it
put your TP-link IP (192.168.0.99 as an example) in the conection box and CONNECT
when terminal window oppens
user: root
pass: [your password]  ( you have to set a pass in the web !!!)
then after logging in type : "screen -r"
that's it
tmu
newbie
Activity: 59
Merit: 0
I have again some questions  Huh
There are some screen shots of putty to TpLink?
Like one https://bitcointalksearch.org/topic/m.4889492
How could I contact my TpLink that way?
I am able to contact TpLink With putty, but how to get cgminer's screen  Huh
I am not so good with linux  Cry (yet)
sr. member
Activity: 361
Merit: 250
Thanks Marto for shipping my boards! I just saw the updated tracking info. Tracking number starts with a 6. I wasn't expecting shipment until end of Feb, so thank you for getting them out quicker than expected!

full member
Activity: 147
Merit: 100
Hey Marto,

I think I have a defective HEX16A2  Undecided

Nevermind. Stupid cheap molex extenders.   Roll Eyes
sr. member
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com

OK I went to my bank and asked them to give me all possible information about the swift transaction. this is what they gave me:





This is everything the bank has on the 581€ transaction for order BJJNEKBIM

marto do you have enough information on the payment now???

Due to the long delay I would prefer a refund (in € or BTC@bitstamp or coinbase) if possible so I can put it toward saving for medical bills & hopefully one of  your newer miners
hero member
Activity: 822
Merit: 1002
What is the status of IOEKQNSIS, this order was placed on 2013-12-09 and still not completed !
If you can't deliver please return money.



Pages:
Jump to: