Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 3. (Read 104884 times)

newbie
Activity: 40
Merit: 0
Right on! I just wanted to make sure I wasn't doing anything wrong. Thanks again!

There is something else wrong, my Raspberry Pi handles 4 Hexminers and 1 Butterfly Labs.
I got them all running on one Pi. I think it's a power issue. I hooked up my two that were on a different PSU to the Pi that had the other three on it and it ran well but when I tried to hook up a 4th Hex miner to my PSU that's when my RPi freaked out.
Right now I have three on one PSU and the other two on another but all are on one RPi. So you can have five Hex miners on one RPi!  Cheesy Now I just wish I could get all five of them or at lest four them going with just my EVGA PSU.  Undecided
full member
Activity: 148
Merit: 102
What is a acceptable overclock and MH/s range for this product?

Optimum setting is : --hexminerc-voltage 1100 --hexminerc-options 16:1500 with result 23 GH/s

Ok awesome thank you. That translates to 1.100 juice and 1500 MH/s in the hexminer.exe which is close to what i was running. Had been doing 1.050 and 1400 for around a steady 21 GH/s
legendary
Activity: 1190
Merit: 1000
What is a acceptable overclock and MH/s range for this product?

Optimum setting is : --hexminerc-voltage 1100 --hexminerc-options 16:1500 with result 23 GH/s
full member
Activity: 148
Merit: 102
What is a acceptable overclock and MH/s range for this product?
hero member
Activity: 728
Merit: 500
I hope you can enjoy your RMA´s i have send to marto 4 broken miners and nothing come back...
no reaction, no money, no miner...
thank you technobit...
your original order ref and tracking on PM please
sr. member
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
I hope you can enjoy your RMA´s i have send to marto 4 broken miners and nothing come back...
no reaction, no money, no miner...
thank you technobit...

how long ago did you RMA them?
newbie
Activity: 40
Merit: 0
Right on! I just wanted to make sure I wasn't doing anything wrong. Thanks again!

There is something else wrong, my Raspberry Pi handles 4 Hexminers and 1 Butterfly Labs.
What do you think it could be? I followed Zich's instructions and I got a EVGA SuperNOVA NEX 650 G powering the 3 of them. So that should be more then enough juice to power them.
I cd cgminer-3.12.3
and screen
before I sudo ./cgminer --hexminerc-voltage 1100 --hexminerc-options 16:1500 --hexminer8-set-diff-to-one 0 --hexminer8-chip-mask 255 --hexminer8-voltage 1005 --hexminer8-options 8:260 --set_default_to_8
Could that be it??? What command do you use?
Thanks!
newbie
Activity: 36
Merit: 0
Right on! I just wanted to make sure I wasn't doing anything wrong. Thanks again!

There is something else wrong, my Paspberry Pi handles 4 Hexminers and 1 Butterfly Labs.
newbie
Activity: 3
Merit: 0
I hope you can enjoy your RMA´s i have send to marto 4 broken miners and nothing come back...
no reaction, no money, no miner...
thank you technobit...
sr. member
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
You can now put an order for this
and put your tracking No in the field.
The Idea is our shipping team to have all RMA units together with the new orders in one shipping list

I have already sent you  the first one of my two broken hex16a2's before you had the system (you should have received it a week ago by now) and now I made A RMA for the second one without entering the tracking number. Should I just post both tracking numbers here?

I would like to know the status of my first hex16a2 RMA (order WVEFURYEA). You should have received it more than a two weeks ago.

I will ship the second one (QAAQGFFGF) tomorrow hopefully and PM you the trackingnr , have been sick, sorry for the delay.
full member
Activity: 148
Merit: 102
Problem fixed and hashing away Smiley
legendary
Activity: 1190
Merit: 1000
legendary
Activity: 1018
Merit: 1001
Thank you very much Zich

W_M
legendary
Activity: 1190
Merit: 1000
Hello, I would like to carry the parameters from the command line to cgminer.conf

command Line
Code:
--hexminerc-voltage 1000 --hexminerc-options 16:1300 --set_default_to_c

cgminer.conf
Code:
"hexminerc-voltage" : "1000",
"hexminerc-options" : "16:1300",

but I can not find the right command to translate --set_default_to_c . I tried with "set_default_to_c" but it not work.
Can you help me.

Thanks in advance W_M

Code:
"set_default_to_c" : true,
legendary
Activity: 1018
Merit: 1001
Hello, I would like to carry the parameters from the command line to cgminer.conf

command Line
Code:
--hexminerc-voltage 1000 --hexminerc-options 16:1300 --set_default_to_c

cgminer.conf
Code:
"hexminerc-voltage" : "1000",
"hexminerc-options" : "16:1300",

but I can not find the right command to translate --set_default_to_c . I tried with "set_default_to_c" and "set_default" : "c" but it not work.
Can you help me.

Thanks in advance W_M
hero member
Activity: 728
Merit: 500
Your sending is ready packed
Sorry for the delay
To be shipped tommorow
member
Activity: 113
Merit: 10
As a response to all the messages above, I didn't read them into detail but I've seen the big characters and red fonts.

Until now my experience with Technobit is good, some months ago their communication was sometimes a bit slow but correct. I have received all my packages and am in correct communication with them about my current outstanding order.

This open order actually is a repair order for a Butburner Fury because the companies who made and delivered that machine does not respond at all. Technobit is taking the chips off and building them on a HEX16B. That's what I call service!

Maybe things are going a bit slow sometimes, but for me they're certainly not a scam company.

Just as a positive note ;-)

Unfortunately I have to take back my earlier positive note. The mentioned repair order still has to be delivered, I'm already waiting over 2,5 months.

The Fury was delivered on the 2nd of January, this has been confirmed by Marto via PM on January 26th where he said "Chips are removed
waiting for our next batch hex16b to be populated with".
Last week I again asked for an update on my order, and I was quite stunned by the answer: "Please send the number of Shipment Waybill for chip that you were sent to us."...... of course I replied to the email. After that, silence...

sr. member
Activity: 361
Merit: 250
Thanks to zich's instructions, I am successfully running (these are all technobit boards): 4 avalon 2 boards, 3 bitfury boards, and 1 coincraft 260 board running off the same RPI.
hero member
Activity: 1246
Merit: 501
I've got 5 of these boards.  They all stopped working at the same time.  First the TL3020 went dead, and now the boards won't fire up.  The PSU appears to be OK (it runs my other mining gear OK).  I've tried them on a BeagleBone Black, but it won't pick up the boards, same with a PC, same with a RaspPi running MinePeon.

The fans still run OK, and I've tried different PSUs on separate boards.  There's no lights on the boards.

Any clue why this might have happened?   Is there any way of getting a repair (considering I bought these second-hand)?

?
legendary
Activity: 1190
Merit: 1000
Right on! I just wanted to make sure I wasn't doing anything wrong. Thanks again!

No problem  Wink
Pages:
Jump to: