Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment (Read 104814 times)

hero member
Activity: 924
Merit: 1000
Technobit  Up to 10 week delays in shipment of some customers Minion Group Buy Units.

The hurt / delays continue for some customers of Technobit who have paid substantial amounts for miners over 10 weeks ago.

I agree with scrappy here, Batch 1 should of been sent out by now. reading the thread its totally unprofessional sending out small orders first.
i see some people waiting 10 weeks now for there order to be shipped out and nothing. Seems people with large orders are getting shafted.

I think compensation is due MARTO!!!!

People have been patient with you since you had a problem with the boards, but this now seems to be resolved.
So what exactly is going on??

i do not what to take legal action as BFL are facing and now KNC miner, marto.
You really havent provided any updates to people with large orders on the forum at all.

Please provide a clear update on what is going on and when everyone's orders are going to be fulfilled and compensation package.
with have been patient, but you have taken are patience for granted now.

There is seriously something wrong with this thread. Folks Martin has yet to deliver batch one yet we have 3 confirmed cases of him shipping batch 2. He says "small orders" Fuck that shit. Mine may have been large and paid in fiat. I have as of to date received 6 of 50, and Marto has promised 6 shipping dates and only sent once!

 Guys, enough of the bullshit.

 I paid in fiat for a flat conversion, have been lied to about shipping, and seen batch 2 orders go out before mine. Check the thread, I was in page 2 and traded in 2 x3's and paid in fiat. I know I am not alone here as I have spoke to many of you in pm's. Enough with the BS, bring it.

scrappy do, dam so shipments are just trickling out. i would of thought at least batch 1 would of been completed by now

I haven't received a single one of my 88 boards. My chips have been at technobit since July 17th.

Marto any news when batch 2 will be shipped, its been over a month now since you received my chips. ive emailed you on your site, 2 weeks ago and no reply.
would like to know whats happening with those.

you going to be offering any compensation for late deliveries now. awaiting 25 boards  Angry and counting

 No offense Guyver, but he hasn't even shipped batch one out. Hopefully he will not ship out anymore batch 2 like the mistake made last week. I just got my first partial shipment today 6 of 50. I know its been over a month for you and I hate it, but it has been over 10 weeks for some of us.
hero member
Activity: 546
Merit: 510
Can you connect the device with USB on low current, when Interupt is disable, and will the graphic driver survive?
legendary
Activity: 1610
Merit: 1000
Thx Marto for reply

do you mean by hub an ethernet splitter yeah I recently bought this could this be the problem
Dude,
There is a bug in one of the versions released so it seems that board is powered on off constantly because of a dead chip
Read changellog and try other version patch
In order for the hot plug to work you need udev and appropriate rules
Finally listen for marto advice and rip pi Wink
Use tplink
Pi is a great device but USB sucks due to irq sharing of internal pi USB switch and Ethernet
full member
Activity: 290
Merit: 100
Thx Marto for reply

do you mean by hub an ethernet splitter yeah I recently bought this could this be the problem
hero member
Activity: 728
Merit: 500
Are using HUB or you plug it directly?
If you want I can provide you ddwrt distro with CGminer for Pi.
Personally I do not like Pi as far the Ethernet and USB share common processor break.
Hello all

I have a hexminerc and has been working fine till last couple of weeks I get error says: hotplug then disables miner I tend to get it going eventually after rebooting pi and unplugging miner a number of times it finally starts again.

Many thanks for any advice
Steve
full member
Activity: 290
Merit: 100
Hello all

I have a hexminerc and has been working fine till last couple of weeks I get error says: hotplug then disables miner I tend to get it going eventually after rebooting pi and unplugging miner a number of times it finally starts again.

Many thanks for any advice
Steve
legendary
Activity: 1610
Merit: 1000
Hia,

So, just to clarify and confirm:

That is roughly 20GH at circa 65W?

Apologies for the negativity here, but that does not seem to be very efficient?

Seems like the BitFury based ones are much more efficient and cost effective?

BR//D.



It is about chips and technology dude
And yes furies are more efficient
newbie
Activity: 6
Merit: 0
Hia,

So, just to clarify and confirm:

That is roughly 20GH at circa 65W?

Apologies for the negativity here, but that does not seem to be very efficient?

Seems like the BitFury based ones are much more efficient and cost effective?

BR//D.

hero member
Activity: 728
Merit: 500
hero member
Activity: 1246
Merit: 501
3 of them use 180-200W when running at 1300MHz (just under 20GH each).  That's off a Corsair CX750 PSU.
newbie
Activity: 6
Merit: 0
Hi Marto,

I was looking at the following page:

http://technobit.eu/index.php?id_product=60&controller=product&id_lang=1

but noticed that there are no power specifications listed.

Can you please let me know what kind of voltage/amps are we looking at here while running this rig?
hero member
Activity: 728
Merit: 500
Price updated, shipping from stock
sr. member
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
I sent two units back for RMA, one of them before you had the RMA option on the site, please see my earlier posts in the thread, but i only received one unit in my RMA package, I have now been waiting almost two months on the first RMA!!!

Thx marto! I'm looking forward to trying the new avalon gen3 stuff or maybe the 2nd gen bitfury miners, but I would like to have all my RMA's back first!
full member
Activity: 126
Merit: 100
Seems to work great now!  Thank you!!
hero member
Activity: 547
Merit: 531
First bits: 12good
rebooted and it still doesn't work.  It works fine with hexminer.   If I try the driver I use for hexminer on cgminer it says it can't initiate hex8 and says to install winusb.  When I install winusb and run cgminer it says no device detected and waiting for usb hotplug devices.  

Yeah, you are right. I hadn't try it my self before, so i didn't know if it work with HEX16C.

I just try it my self & it's not working, sorry. I am not sure what is the cause. Maybe this version only support HEX8.
Try to pm 2GOOD  Smiley

Yes my bad, wrong binnary Smiley

The link is updated, and I've made a small How-To here:
https://bitcointalksearch.org/topic/cgminer-windows-build-for-technobits-boards-569689

Please test Wink

best
2GOOD
full member
Activity: 126
Merit: 100
Ok, thank you for looking into it for me! I was thinking I had something wrong.
legendary
Activity: 1190
Merit: 1000
rebooted and it still doesn't work.  It works fine with hexminer.   If I try the driver I use for hexminer on cgminer it says it can't initiate hex8 and says to install winusb.  When I install winusb and run cgminer it says no device detected and waiting for usb hotplug devices.  

Yeah, you are right. I hadn't try it my self before, so i didn't know if it work with HEX16C.

I just try it my self & it's not working, sorry. I am not sure what is the cause. Maybe this version only support HEX8.
Try to pm 2GOOD  Smiley
full member
Activity: 126
Merit: 100
rebooted and it still doesn't work.  It works fine with hexminer.   If I try the driver I use for hexminer on cgminer it says it can't initiate hex8 and says to install winusb.  When I install winusb and run cgminer it says no device detected and waiting for usb hotplug devices. 
legendary
Activity: 1190
Merit: 1000
I only added my pool information to the config, do other changes need to be made?

Even without proper setting, cgminer should be able to detect the hex, try to reboot the windows
full member
Activity: 126
Merit: 100
I only added my pool information to the config, do other changes need to be made?
Pages:
Jump to: