[RUN 2 CLOSED][SIDEHACK STICK]GekkoScience Compac Official sales thread - page 4.

baazju

member

Activity: 98

Merit: 10

Quote from: sidehack on February 17, 2016, 08:49:21 PM

Quote from: sidehack on July 17, 2015, 12:45:47 PM

...
SECOND RUN QUEUE: 597 sticks paid (156 shipped)

Sales for the second run of Compacs is now open. I will be assembling using pulled chips, but every Compac will still have the same testing requirements and warranty. Delivery should start in the middle of February. Total batch size about 750 sticks.

This is taken from the first post, which is continuously updated when more sticks are sold or shipped. I'll have probably at least 90 more going out Friday; the next order after that is 100 so it kinda holds up the line.

Sorry I definitely need to learn to read. Thanks for the quick reply.

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

Quote from: sidehack on July 17, 2015, 12:45:47 PM

...
SECOND RUN QUEUE: 597 sticks paid (156 shipped)

Sales for the second run of Compacs is now open. I will be assembling using pulled chips, but every Compac will still have the same testing requirements and warranty. Delivery should start in the middle of February. Total batch size about 750 sticks.

This is taken from the first post, which is continuously updated when more sticks are sold or shipped. I'll have probably at least 90 more going out Friday; the next order after that is 100 so it kinda holds up the line.

baazju

member

Activity: 98

Merit: 10

Quote from: sidehack on February 16, 2016, 11:13:30 PM

Got more sticks hitting the post office. I'll have tracking numbers sometime tomorrow.

Pulled-chip sticks start with serial number 2200. So if you get a stick with serial number less than 2200 (in this batch, 2001-2138) are the last of my new ASICs and 2200 on are the pulled chips.

Don't mean to pry or imply that I am impatient, more curious than anything, how many have been shipped?

sobe-it

sr. member

Activity: 453

Merit: 250

Quote from: Vociferous on February 17, 2016, 03:53:44 PM

So each stick runs are 8GH/s, but can be overclocked to 23 Gh/s?

To get to 23Gh/s or over you need a fan pointed at it or upgrade the heat sink. I took an old bfl heat sink and mounted it with the fan. It never thought about getting hot, if I turned off the fan the heat sink would be very slightly warm to the touch after a few hours.

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

The default depends on what software you're running. If it's a stock cgminer that enumerates them as U3, it defaults to 225MHz (I think). I believe BFG defaults around there also. I don't know offhand what cgminer-gekko defaults to, but probably 150 or 200MHz. 150MHz and around 600-620mV should be able to run 8GH off a stock (500mA) USB port.

By the by, all this is discussed in the support thread, a massive and conspicuous link for which can be found in the first post of this sales thread.

bronxnua

member

Activity: 92

Merit: 10

Quote from: Vociferous on February 17, 2016, 03:53:44 PM

So each stick runs are 8GH/s, but can be overclocked to 23 Gh/s?

I should be getting my 53 soon. Depends on your HUB Hub. Cgminer will try to max out to highest it can.

Some get 12gh without doing anything cgminer does that default.

I had the same issue with U2 USB miners. Cgminer ran them 250 default... they are 1.6gh but were running 3gh.

Vociferous

newbie

Activity: 29

Merit: 0

So each stick runs are 8GH/s, but can be overclocked to 23 Gh/s?

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

The discussion was about power supply fan noise.

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: bronxnua on February 15, 2016, 08:35:44 AM

I will just test the how high I can run the ubs compacs. the mining will be in Garage.. that is down stairs. So the sound is a non issue.

They're fanless.....

bctmke

sr. member

Activity: 294

Merit: 250

My pair showed up today!

Thanks sidehack

xZork

hero member

Activity: 1249

Merit: 506

These are built incredibly well. I only have one and it's sticking out of the front of my tower, some how my wife bent it about 20Deg and it still ran. She told me when I got home from work and I bent it back, still runs like a champ!

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

Got more sticks hitting the post office. I'll have tracking numbers sometime tomorrow.

Pulled-chip sticks start with serial number 2200. So if you get a stick with serial number less than 2200 (in this batch, 2001-2138) are the last of my new ASICs and 2200 on are the pulled chips.

bronxnua

member

Activity: 92

Merit: 10

Quote from: philipma1957 on February 15, 2016, 08:20:23 AM

Quote from: bronxnua on February 15, 2016, 08:10:52 AM

Quote from: philipma1957 on February 14, 2016, 11:38:53 AM

Quote from: bronxnua on February 14, 2016, 08:28:29 AM

Mine is rated 75A so it can do the 49 at 1.5am or greater.

well they are all meanwell.

I owned yours it will be about 70% efficient at full load the fan will be very loud. You will need to turn the volt adjustment pot to 5.5 volts and you will drop down quite a bit to about 4.9 volts.

this is really the best choice add a fan for a little more watts or run fanless

https://www.trcelectronics.com/ecomm/pdf/hsp300.pdf 87% vs your 78%

RATED POWER(convection) is 60Amps 300watts

I have 35 Sunpower 327W panels working on my roof.

I hate con Edison.

bronxnua

member

Activity: 92

Merit: 10

Quote from: philipma1957 on February 15, 2016, 08:20:23 AM

Quote from: bronxnua on February 15, 2016, 08:10:52 AM

Quote from: philipma1957 on February 14, 2016, 11:38:53 AM

Quote from: bronxnua on February 14, 2016, 08:28:29 AM

Mine is rated 75A so it can do the 49 at 1.5am or greater.

well they are all meanwell.

I owned yours it will be about 70% efficient at full load the fan will be very loud. You will need to turn the volt adjustment pot to 5.5 volts and you will drop down quite a bit to about 4.9 volts.

this is really the best choice add a fan for a little more watts or run fanless

https://www.trcelectronics.com/ecomm/pdf/hsp300.pdf 87% vs your 78%

RATED POWER(convection) is 60Amps 300watts

convection means no fan

add a fan and it will bump to 75 Amps and 375 watts same as your model.

When you get your model psu and set it up let us know how it works for you.

I have a solar panels on my roof, I won't pay for much my mining. Almost none

then your choice is fine the psu fan is a bit loud but if power costs don't matter it is a good choice.

Watch for voltage sag with all 49 hubs in use. you may want this

http://www.amazon.com/gp/product/B00J3JSEG6/ref=pd_lpo_sbs_dp_ss_2?

I will just test the how high I can run the ubs compacs. the mining will be in Garage.. that is down stairs. So the sound is a non issue.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: bronxnua on February 15, 2016, 08:10:52 AM

Quote from: philipma1957 on February 14, 2016, 11:38:53 AM

Quote from: bronxnua on February 14, 2016, 08:28:29 AM

Mine is rated 75A so it can do the 49 at 1.5am or greater.

well they are all meanwell.

I owned yours it will be about 70% efficient at full load the fan will be very loud. You will need to turn the volt adjustment pot to 5.5 volts and you will drop down quite a bit to about 4.9 volts.

this is really the best choice add a fan for a little more watts or run fanless

https://www.trcelectronics.com/ecomm/pdf/hsp300.pdf 87% vs your 78%

RATED POWER(convection) is 60Amps 300watts

convection means no fan

add a fan and it will bump to 75 Amps and 375 watts same as your model.

When you get your model psu and set it up let us know how it works for you.

I have a solar panels on my roof, I won't pay for much my mining. Almost none

then your choice is fine the psu fan is a bit loud but if power costs don't matter it is a good choice.

Watch for voltage sag with all 49 hubs in use. you may want this

http://www.amazon.com/gp/product/B00J3JSEG6/ref=pd_lpo_sbs_dp_ss_2?

bronxnua

member

Activity: 92

Merit: 10

Quote from: philipma1957 on February 14, 2016, 11:38:53 AM

Quote from: bronxnua on February 14, 2016, 08:28:29 AM

Mine is rated 75A so it can do the 49 at 1.5am or greater.

well they are all meanwell.

I owned yours it will be about 70% efficient at full load the fan will be very loud. You will need to turn the volt adjustment pot to 5.5 volts and you will drop down quite a bit to about 4.9 volts.

this is really the best choice add a fan for a little more watts or run fanless

https://www.trcelectronics.com/ecomm/pdf/hsp300.pdf 87% vs your 78%

RATED POWER(convection) is 60Amps 300watts

convection means no fan

add a fan and it will bump to 75 Amps and 375 watts same as your model.

When you get your model psu and set it up let us know how it works for you.

I have a solar panels on my roof, I won't pay for much my mining. Almost none

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

All shipped orders have received word (and tracking numbers) from me. I'm gonna try and be better about getting this information out this time around.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: bronxnua on February 14, 2016, 08:28:29 AM

Mine is rated 75A so it can do the 49 at 1.5am or greater.

well they are all meanwell.

I owned yours it will be about 70% efficient at full load the fan will be very loud. You will need to turn the volt adjustment pot to 5.5 volts and you will drop down quite a bit to about 4.9 volts.

this is really the best choice add a fan for a little more watts or run fanless

https://www.trcelectronics.com/ecomm/pdf/hsp300.pdf 87% vs your 78%

RATED POWER(convection) is 60Amps 300watts

convection means no fan

add a fan and it will bump to 75 Amps and 375 watts same as your model.

When you get your model psu and set it up let us know how it works for you.

bronxnua

member

Activity: 92

Merit: 10

Quote from: philipma1957 on February 14, 2016, 05:14:30 AM

Quote from: bronxnua on February 11, 2016, 02:53:47 PM

Quote from: sidehack on July 19, 2015, 08:19:30 PM

Yeah, I guess anyone wanting to drive to Missouri for pickup should pay the $25 per stick but not the shipping. And let me know in the message that you'll be picking up.

I wish I was close I would pick up my 53..

Did you see my post about the power supply it should power them up to at least 1.5a

that psu is okay I would not use it as it has low efficiency

these two are better

https://www.trcelectronics.com/ecomm/pdf/hrp450.pdf 84%
https://www.trcelectronics.com/ecomm/pdf/rsp500.pdf 83%

this is yours
https://www.trcelectronics.com/ecomm/pdf/se450.pdf 78%

Mine is rated 75A so it can do the 49 at 1.5am or greater.

your psu is noisy.

I would cancel the order and consider the fanless one then add a fan to it.

BTW if you use 49 ports the sticks will need a fan

I did 20 sticks on the 49 port I now do 13 on this psu

https://www.trcelectronics.com/ecomm/pdf/hsp150.pdf 90%

this one is fanless and does 250 watts in silence add a fan and it does 350 watts

https://www.trcelectronics.com/ecomm/pdf/usp350.pdf 84%

this is really the best choice add a fan for a little more watts or run fanless
https://www.trcelectronics.com/ecomm/pdf/hsp300.pdf 87% vs your 78%

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: bronxnua on February 11, 2016, 02:53:47 PM

Quote from: sidehack on July 19, 2015, 08:19:30 PM

Yeah, I guess anyone wanting to drive to Missouri for pickup should pay the $25 per stick but not the shipping. And let me know in the message that you'll be picking up.

I wish I was close I would pick up my 53..

Did you see my post about the power supply it should power them up to at least 1.5a

that psu is okay I would not use it as it has low efficiency

these two are better

https://www.trcelectronics.com/ecomm/pdf/hrp450.pdf 84%
https://www.trcelectronics.com/ecomm/pdf/rsp500.pdf 83%

this is yours
https://www.trcelectronics.com/ecomm/pdf/se450.pdf 78%

your psu is noisy.

I would cancel the order and consider the fanless one then add a fan to it.

BTW if you use 49 ports the sticks will need a fan

I did 20 sticks on the 49 port I now do 13 on this psu

https://www.trcelectronics.com/ecomm/pdf/hsp150.pdf 90%

this one is fanless and does 250 watts in silence add a fan and it does 350 watts

https://www.trcelectronics.com/ecomm/pdf/usp350.pdf 84%

this is really the best choice add a fan for a little more watts or run fanless
https://www.trcelectronics.com/ecomm/pdf/hsp300.pdf 87% vs your 78%

Topic: [RUN 2 CLOSED][SIDEHACK STICK]GekkoScience Compac Official sales thread - page 4. (Read 69928 times)