RX 560 4GB Ethereum - page 10. | Bitcointalksearch.org

RX560 spn

newbie

Activity: 1

Merit: 0

Quote from: jongoslondo on February 02, 2018, 09:26:25 AM

my MSI rx560 aero 4gb oc (hynix) only got 10.9 - 11 mh/s and i saw a lot of users which has type same as mine can reach 12 mh/s or more? Huh

i've tried copy 1625 to 1750 and upper then on afterburner i set cclock 1196, mclock 2100, fan 80 and limit power +60.
if set core clock more lower, hashrate went down too and when temp reach 60 celcius core went down self:-[
i used claymore v10 to mining eth on nanopool
any trick that i can use to reach 12 Mh/s or more?

mobo GA gaming b8
Intel CPU G440 @3.30GHz
4gb DDR4 RAM
win 7 64bit
crimson relive 17.8.1

Hi! I have same G card (hynix memory BIOS mode timing patch) and until i install "Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23" drivers i didn't have more than 11'5 Mh/s.
Less that 7'7 Mh/s without Bios mode.

Now, whit this driver, i have ETH SOLO 13'9 with set cclock 1080, mclock 2015, limit power +0 (14'6 at mclock 2075 with minimal errors HWiNFO64).
In DUAL ETH-DCR mining Eth 13'5 Mh/s and Dcr 340 Mh/s with -dcri 25, same clocks but 12w more of consuption.
If you answer the question about drivers: Yes, i install some versions adrenalin but worst results.

MSI H110M PRO-VD
Intel CPU G4560 @3.50 GHz
8 Gb DDR4 RAM
PS RADIX IV 500W PFC active
Win 10 64 bit
Beta Blockchain Aug23
Claymore 10.6

bcoolmc

newbie

Activity: 2

Merit: 0

Hello guys... I have some questions and I hope I'm on right place... I just get a rig with x6 Asus Strix Rx560 O4G Evo Oc Gaming... On eth i get 10.xxx mhz,without oc etc... When i clock it a bit with afterburner I can get around 11,800 mhz... I tried to clock them in bios but when i open it with bios editor I dont have timers more then 1500... Is it possible that they cant be clocked more or I need to unlock some things etc?

PB_SilentMiner

newbie

Activity: 36

Merit: 0

Quote from: PB_SilentMiner on February 02, 2018, 02:12:48 PM

Quote from: kurjam on February 02, 2018, 12:16:03 AM

Quote from: PB_SilentMiner on February 01, 2018, 05:34:56 PM

Hey All,

Did you undervolt after you reached to -mclock 1900? Maybe it helps not to undervolt before you reached max stable frq.

Try those drivers: https://bitcointalksearch.org/topic/ethash-dag-epoch-rx470480570580-fix-2068446

How did you unlock shaders?

I'm running Win10x64 so no need for those drivers, these are for Windows 7, I might try the Official DAG fix driver from AMD though.

As for unlocking the shaders i used a combination of the below sites (even from my technical background, it took a few times to read through to understand how to do it)

For tutorial - https://www.reddit.com/r/Amd/comments/6gah41/how_to_unlock_your_xfx_rx_460_single_slot_4g_by/

For software needed - https://anorak.tech/t/anoraks-amd-vbios-hex-modification-tutorial/126/4

Once I had the unlocked shaders BIOS, I used 1 click timings in Polaris Bois Editor 1.6.7 and reflashed the BIOS with the unlocked shaders

Just need to figure out how to get the hashrate to get past 12.5-12.6!

****Update*****

Forget the Oneclick timing, found this timing in another thread for Micron (Hynix too)

Link - https://bitcointalksearch.org/topic/m.29489751

777000000000000022AA1C00315A5436A0550F15B68C1506004082007C041420CA8980A9020004C 01712262B612B3715

Now getting 13.5 Stable no errors @ 1189/925 1850/850

Not bad for a Gigabyte RX560 OC 4GD REV2 with Micron memory (GV-RX560OC-4GD/F60/0696)

r2b1

newbie

Activity: 3

Merit: 2

Quote from: jongoslondo on February 02, 2018, 02:27:30 PM

my memory is H5GQ8H24MJ ( SK Hynix )
when i tried to copy your timings, there is no enough space so it's only be like this "......xxxx0000001B162C31C0313F1". it should be "....xxxxx0000001B162C31C0313F17" right?
i only can find "vddc" Embarrassed

where i can find "mvdd" on polaris v3.3 ?
i just started mining so sorry for too many questions and bad english

No it's correct I just it checked again. For some weird reason copying that from the browser adds a space between two 0s. Remove that and you should be fine.

I don't know how you set mvdd on Windows. But you should be fine with default mvdd (1000mv). If you also use the GPU for display output it might be better to use more stable 2100 MHz on Ram anyways.

jongoslondo

full member

Activity: 420

Merit: 100

Quote from: r2b1 on February 02, 2018, 01:11:42 PM

Quote from: jongoslondo on February 02, 2018, 09:26:25 AM

my MSI rx560 aero 4gb oc (hynix) only got 10.9 - 11 mh/s and i saw a lot of users which has type same as mine can reach 12 mh/s or more? Huh

i've tried copy 1625 to 1750 and upper then on afterburner i set cclock 1196, mclock 2100, fan 80 and limit power +60.
if set core clock more lower, hashrate went down too and when temp reach 60 celcius core went down self:-[
i used claymore v10 to mining eth on nanopool
any trick that i can use to reach 12 Mh/s or more?

I'm getting around 14.5Mh/s with exactly that card! Try this memory timings: my memory is H5GQ8H24MJ (Hynix 2)
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17

Copy them to 2000 and 2250 only (because you will overclock memory anyway you don't have to change 1750 timings).

I'm running the card at
cclock 1200
vddc 900

memclock 2150
mvdd 1050

I didn't change the power limit. But you have to if you don't undervolt the core. My ethminer parameters are "--cl-local-work 64 --cl-global-work 32768", but default settings also work well. I'm mining on linux and your results may vary tough.

If you increase power limits and overclock the core instead it's possible to get close to 15Mh/s. But I wouldn't recommend that because efficiency will decrease and pulling more than 75W from the PCIe slot could damage your board. I'm measuring a power delta of ~60W at the wall with my settings compared to the same system with the card removed.

my memory is H5GQ8H24MJ ( SK Hynix )
when i tried to copy your timings, there is no enough space so it's only be like this "......xxxx0000001B162C31C0313F1". it should be "....xxxxx0000001B162C31C0313F17" right?
i only can find "vddc" Embarrassed

where i can find "mvdd" on polaris v3.3 ?
i just started mining so sorry for too many questions and bad english

PB_SilentMiner

newbie

Activity: 36

Merit: 0

Quote from: kurjam on February 02, 2018, 12:16:03 AM

Quote from: PB_SilentMiner on February 01, 2018, 05:34:56 PM

Hey All,

Did you undervolt after you reached to -mclock 1900? Maybe it helps not to undervolt before you reached max stable frq.

Try those drivers: https://bitcointalksearch.org/topic/ethash-dag-epoch-rx470480570580-fix-2068446

How did you unlock shaders?

I'm running Win10x64 so no need for those drivers, these are for Windows 7, I might try the Official DAG fix driver from AMD though.

As for unlocking the shaders i used a combination of the below sites (even from my technical background, it took a few times to read through to understand how to do it)

For tutorial - https://www.reddit.com/r/Amd/comments/6gah41/how_to_unlock_your_xfx_rx_460_single_slot_4g_by/

For software needed - https://anorak.tech/t/anoraks-amd-vbios-hex-modification-tutorial/126/4

Once I had the unlocked shaders BIOS, I used 1 click timings in Polaris Bois Editor 1.6.7 and reflashed the BIOS with the unlocked shaders

Just need to figure out how to get the hashrate to get past 12.5-12.6!

r2b1

newbie

Activity: 3

Merit: 2

Quote from: jongoslondo on February 02, 2018, 09:26:25 AM

my MSI rx560 aero 4gb oc (hynix) only got 10.9 - 11 mh/s and i saw a lot of users which has type same as mine can reach 12 mh/s or more? Huh

i've tried copy 1625 to 1750 and upper then on afterburner i set cclock 1196, mclock 2100, fan 80 and limit power +60.
if set core clock more lower, hashrate went down too and when temp reach 60 celcius core went down self:-[
i used claymore v10 to mining eth on nanopool
any trick that i can use to reach 12 Mh/s or more?

I'm getting around 14.5Mh/s with exactly that card! Try this memory timings: my memory is H5GQ8H24MJ (Hynix 2)
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17

Copy them to 2000 and 2250 only (because you will overclock memory anyway you don't have to change 1750 timings).

I'm running the card at
cclock 1200
vddc 900

memclock 2150
mvdd 1050

I didn't change the power limit. But you have to if you don't undervolt the core. My ethminer parameters are "--cl-local-work 64 --cl-global-work 32768", but default settings also work well. I'm mining on linux and your results may vary tough.

If you increase power limits and overclock the core instead it's possible to get close to 15Mh/s. But I wouldn't recommend that because efficiency will decrease and pulling more than 75W from the PCIe slot could damage your board. I'm measuring a power delta of ~60W at the wall with my settings compared to the same system with the card removed.

jongoslondo

full member

Activity: 420

Merit: 100

my MSI rx560 aero 4gb oc (hynix) only got 10.9 - 11 mh/s and i saw a lot of users which has type same as mine can reach 12 mh/s or more? Huh

i've tried copy 1625 to 1750 and upper then on afterburner i set cclock 1196, mclock 2100, fan 80 and limit power +60.
if set core clock more lower, hashrate went down too and when temp reach 60 celcius core went down self:-[
i used claymore v10 to mining eth on nanopool
any trick that i can use to reach 12 Mh/s or more?

mobo GA gaming b8
Intel CPU G440 @3.30GHz
4gb DDR4 RAM
win 7 64bit
crimson relive 17.8.1

kurjam

newbie

Activity: 8

Merit: 0

Quote from: PB_SilentMiner on February 01, 2018, 05:34:56 PM

Hey All,

Did you undervolt after you reached to -mclock 1900? Maybe it helps not to undervolt before you reached max stable frq.

Try those drivers: https://bitcointalksearch.org/topic/ethash-dag-epoch-rx470480570580-fix-2068446

How did you unlock shaders?

PB_SilentMiner

newbie

Activity: 36

Merit: 0

Hey All,

Been reading up on the RX560s and took a small bite I already have 2 bigger rigs running RX470s & RX480s but unable to find these anywhere (for a reasonable price), managed to get a couple of donkeys - Gigabyte RX560 OC 4G (Rev2) locked to 896 shaders, have managed to unlock these to get the full 1024 :-) micron memory

Modded BIOS using PBE 1.6.7 with One Click Timings

Getting between 12-12.5MH/s ETH using "-cclock 1189 -mclock 1900 -cvddc 900 -mvddc 850" if i push the clocks any higher it becomes unstable.

Card sits around 54 degrees @ 40% Fan

But is there any way of getting this higher with additional tweaks

Any ideas welcome, or is this the max?

MSI Z170a Gaming M5
Intel Celeron G3900
Win10Prox64
4GB DDR4 RAM
32GB Pagefile
Adrenalin 17.2.2 Drivers
ATIMDAGPatcher1.4.5

kurjam

newbie

Activity: 8

Merit: 0

Quote from: R0land on February 01, 2018, 03:46:10 AM

I´m sorry .
I am vacationing until monday.

No worries. Whenever you are ready. Your help is much appreciated.

R0land

jr. member

Activity: 208

Merit: 3

Quote from: kurjam on February 01, 2018, 01:27:45 AM

@R0land, that diddnt work. Im still at 896 shaders

I´m sorry .
I am vacationing until monday.

kurjam

newbie

Activity: 8

Merit: 0

@R0land, that diddnt work. Im still at 896 shaders

http://gpuz.techpowerup.com/18/02/01/6jw.png

bitminersfast

newbie

Activity: 1

Merit: 0

hi, I have a 460 with 4gb samsung memory but so far i havent been able to unlock it. could you help? i have not seen any unlock for this model anywhere, would be very helpful. i only get around 9 mhs stock.
https://www.techpowerup.com/vgabios/190917/190917

dzoni47

newbie

Activity: 1

Merit: 0

@R0land,
please do you have good BIOS for Sapphire RX560 4GB Hynix Memory: H5GQ8H24MJ P/N of my card is: 11267-11-10G
I tried many bios but all is bad, my best is 13 MH/s with few errors. Do you have for 15-16 MH/s?
Thank you sooo much!

Original BIOS:
https://anorak.tech/uploads/default/original/2X/d/d0222fff0c5c373d89ba598be7fdbe50b2296970.rom

R0land

jr. member

Activity: 208

Merit: 3

Quote from: kurjam on January 31, 2018, 12:47:35 PM

@R0land can you help me unlock shaders for my RX560? 896 to 1024

There are many guides how to unlock shaders on RX460, but i'am not sure the apply to RX560

Would like to see what are the impact to ETH mining speed.

RX570 amd RX580 have same type of hynix memory as my RX560 (H5GC8H24MJ) only difference is GPU and shaders. 896 vs 2048 vs 2304

There must be impact to mining speed.

Original BIOS: https://www.upload.ee/download/7968607/6c834c23777f12f89aa5/RX560_sapphire_hynix.rom

Congratulation, it´s the first RX560D card with normal memory

.
http://www120.zippyshare.com/v/8hMRtamc/file.html

Please report the result.

kurjam

newbie

Activity: 8

Merit: 0

@R0land can you help me unlock shaders for my RX560? 896 to 1024

There are many guides how to unlock shaders on RX460, but i'am not sure the apply to RX560

Would like to see what are the impact to ETH mining speed.

RX570 amd RX580 have same type of hynix memory as my RX560 (H5GC8H24MJ) only difference is GPU and shaders. 896 vs 2048 vs 2304

There must be impact to mining speed.

Original BIOS: https://www.upload.ee/download/7968607/6c834c23777f12f89aa5/RX560_sapphire_hynix.rom

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: docsave on January 30, 2018, 03:07:21 PM

Does any know how to mod asus rx560 4gb with Hynix memory?

Everybody?

docsave

newbie

Activity: 2

Merit: 0

Does any know how to mod asus rx560 4gb with Hynix memory?

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: kurjam on January 29, 2018, 03:07:43 PM

Bought Sapphire Pulse RX560 with 2 fans and additional 6pin power connector. Unfortunately 14CU and 6000mhz Hynix H5GC8H24MJ memory.

getting 13.8-14mh, with robinhood modded AMD drivers and modded bios 1500 straps to up. OC with 2000mhz memory and 1100mhz gpu. AMD latest official drivers and blockchain drivers (aug.23) performed worse.

Getting few memory errors, but no rejected shares and running good about 10hours.

How can i get to try to push it further? No Overclock options over 2000mhz for memory in AMD Wattman or MSI afterburner.

What else to change in BIOS editor after straps to help it to perform better? Will unlock to 16CU will help to push another 1-2MH out of it?

You need better timings, you can try my bios mod guide https://bitcointalksearch.org/topic/guidetutorialxmrethhow-to-mod-bios-rx470570480580-vega-mining-1954245 with some free performance timings.
This Hynix type is great for XMR or at least my timings for this type Cheesy

Topic: RX 560 4GB Ethereum - page 10. (Read 212719 times)