Bought Sapphire Pulse RX560 with 2 fans and additional 6pin power connector. Unfortunately 14CU and 6000mhz Hynix H5GC8H24MJ memory.
getting 13.8-14mh, with robinhood modded AMD drivers and modded bios 1500 straps to up. OC with 2000mhz memory and 1100mhz gpu. AMD latest official drivers and blockchain drivers (aug.23) performed worse.
Getting few memory errors, but no rejected shares and running good about 10hours.
How can i get to try to push it further? No Overclock options over 2000mhz for memory in AMD Wattman or MSI afterburner.
What else to change in BIOS editor after straps to help it to perform better? Will unlock to 16CU will help to push another 1-2MH out of it?
Topic: RX 560 4GB Ethereum - page 11. (Read 212719 times)
Probably 6Ghz hynix memory card. These can do 13.5 tops with some mem. errors. I did not found any timing strings for it. I use 1625 strip in 1750 and that is best I can do with it. Mem string for standard hynix don't work, as it simply can't reach more then 1900mhz and all the timings target 2000+
Is it H5GC8H24MJ? For this type those free available aren't very good. Few months ago with some testers we've made good performance timing for XMR and a little bit worse timing for ETH (still need some love). But it was mainly for RX 570 that they had max 1500Mhz strap si I'm not sure about hashrate for RX 560 but RX 580 with this type can do 950H/s with pretty nice power consumption, ETH is weaker around 31MH/s.About 450H/s cryptonight, 14.5MH/s ethash with rx560, that Hynix memory is not good at all
Probably 6Ghz hynix memory card. These can do 13.5 tops with some mem. errors. I did not found any timing strings for it. I use 1625 strip in 1750 and that is best I can do with it. Mem string for standard hynix don't work, as it simply can't reach more then 1900mhz and all the timings target 2000+
Is it H5GC8H24MJ? For this type those free available aren't very good. Few months ago with some testers we've made good performance timing for XMR and a little bit worse timing for ETH (still need some love). But it was mainly for RX 570 that they had max 1500Mhz strap si I'm not sure about hashrate for RX 560 but RX 580 with this type can do 950H/s with pretty nice power consumption, ETH is weaker around 31MH/s.About 450H/s cryptonight, 14.5MH/s ethash with rx560, that Hynix memory is not good at all
Probably 6Ghz hynix memory card. These can do 13.5 tops with some mem. errors. I did not found any timing strings for it. I use 1625 strip in 1750 and that is best I can do with it. Mem string for standard hynix don't work, as it simply can't reach more then 1900mhz and all the timings target 2000+
Is it H5GC8H24MJ? For this type those free available aren't very good. Few months ago with some testers we've made good performance timing for XMR and a little bit worse timing for ETH (still need some love). But it was mainly for RX 570 that they had max 1500Mhz strap si I'm not sure about hashrate for RX 560 but RX 580 with this type can do 950H/s with pretty nice power consumption, ETH is weaker around 31MH/s.
mine also totally same with you guys. 2x xfx rx560 4gb cards stuck 10,5 mh/s. 1900mhz can't change. I tryed diffrent mods and nothing change. 10,5 mh/s.
these are the cheapest and best bang for bucks for ethash algorithm
Probably 6Ghz hynix memory card. These can do 13.5 tops with some mem. errors. I did not found any timing strings for it. I use 1625 strip in 1750 and that is best I can do with it. Mem string for standard hynix don't work, as it simply can't reach more then 1900mhz and all the timings target 2000+
So the card came stock at 1750 MHz so I don't think its a 6Ghz memory card. I actually have this running at 2000mhz for the memory right now. I haven't checked the errors but its still running 10.5mh/s according to claymore. As for the rest....lets pretend I have no idea what you are talking about.
Probably 6Ghz hynix memory card. These can do 13.5 tops with some mem. errors. I did not found any timing strings for it. I use 1625 strip in 1750 and that is best I can do with it. Mem string for standard hynix don't work, as it simply can't reach more then 1900mhz and all the timings target 2000+
So I kinda gave up on my Asus RX560 EVO OC as even @-10°c in the garage the card was still pushing 90°c with the fans at 100% and I was barely getting over 7MH/s. Anyway I bought a Gigabyte RX560 Gaming OC card and I managed to get it stable with 1100 / 850 timings and 1950 / 850 memory. It uses Hynix memory and at most it is hitting 40°c with no fan. The catalyst drivers let me change it to Compute so I thought I was well on my way! Still stuck at around 10.5 MH/s however and I don't know how to get it up past that? If I found a bios for this card what EXACTLY is that going to do that I haven't done? 
roland thank you for your bios, now my card working on 13-13,5 mh/s. but memory clock still lock at 1950 mhz. my other msi rx 560 4gb is working 15,5 mh/s at 2200mhz. can this card also work at 15 mh/s?
The memory on the budget cards (rx560D) normaly run @1500MHz(specification), 1950 is realy good.The better cards normaly run @1750(specification) and the best @2000 or 2100 (specification).
But I think with additional cooling of the memory and vrm, it can be faster.
my MSI Aero rx 560 4gb is working 15,8 mh/s at 2250 mhz(memory clock)
Nevermind, I figured out the idiot issue of 6000mhz memory that are in some 560s 
I have rx 560 pulse 4G sapphire with 2 fans.
Hynix memory.
Any usable timings to get to 14-15 range? And what frequency?
I tried the common ones:
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
999000000000000022559D0010DE5B4480551312B74C450A00400600750414206A8900A00200312 010112D34A42A3816
8mh/s stock. 11.5 with timings is best and still with mem errors. I'm in compute mode.
It does have
H5GC8H24MJ and not the usual H5GQ8H24MJ
Hynix memory.
Any usable timings to get to 14-15 range? And what frequency?
I tried the common ones:
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
999000000000000022559D0010DE5B4480551312B74C450A00400600750414206A8900A00200312 010112D34A42A3816
8mh/s stock. 11.5 with timings is best and still with mem errors. I'm in compute mode.
It does have
H5GC8H24MJ and not the usual H5GQ8H24MJ
Hi guys,
Can you tell me pls, i bought ASUS RX560-O4G-EVO and this card is locked on 896 SP. Exists universal "unlocked" BIOS? Can i download BIOS from previously post for xfx card? Or do I have to have a special bios for my card?
Thank you, Mat and sorry for my english.
Can you tell me pls, i bought ASUS RX560-O4G-EVO and this card is locked on 896 SP. Exists universal "unlocked" BIOS? Can i download BIOS from previously post for xfx card? Or do I have to have a special bios for my card?
Thank you, Mat and sorry for my english.
I uploaded a unlocked BIOS for your card:
https://www.techpowerup.com/forums/threads/unlock-shaders-asus-rx-560-rog-strix-evo-gaming-4gb.239154/
http://www58.zippyshare.com/v/iI389is0/file.html
Ty for help. I have problem with mismatch error. Here is my orig. BIOS (micron memory): http://www95.zippyshare.com/v/eGD6Hwm4/file.html
Matof
Hi Roland, can you please edit /unlock my BIOS? Thank you
http://www56.zippyshare.com/v/SPzZorqI/file.html
Good luck
Hi guys,
Can you tell me pls, i bought ASUS RX560-O4G-EVO and this card is locked on 896 SP. Exists universal "unlocked" BIOS? Can i download BIOS from previously post for xfx card? Or do I have to have a special bios for my card?
Thank you, Mat and sorry for my english.
Can you tell me pls, i bought ASUS RX560-O4G-EVO and this card is locked on 896 SP. Exists universal "unlocked" BIOS? Can i download BIOS from previously post for xfx card? Or do I have to have a special bios for my card?
Thank you, Mat and sorry for my english.
I uploaded a unlocked BIOS for your card:
https://www.techpowerup.com/forums/threads/unlock-shaders-asus-rx-560-rog-strix-evo-gaming-4gb.239154/
http://www58.zippyshare.com/v/iI389is0/file.html
Ty for help. I have problem with mismatch error. Here is my orig. BIOS (micron memory): http://www95.zippyshare.com/v/eGD6Hwm4/file.html
Matof
Hi Roland, can you please edit /unlock my BIOS? Thank you
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung),
thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type
Hello,
i watch witch gpuz all of my card have micron memory and there is my original bios
http://www100.zippyshare.com/v/Ubo6i4Fq/file.html
with new driver i can take 13,1 with original bios with overclock and this is stable pls can mod my original bios to take more mh
and one more qestion when i flash bios i do this with only one card in same time not more gpu in motherboard ?
thx for help me
13,1 is a good hashrate for your card.
I think you have the 6000MHz memory (1500x4), it only work up to 1950
.I can unlock the 16 shaders, but the bottle neck is the memory. The card will not hash faster.
Hello,
yes i have 6000Mhz memory i flash bios but in one card i use difrend bios they have memory set to 2200 after restar card dont work when is she in pc ther resrating again and again its gpu destroyed or i have litle chance to rescue this card
i know i fuck this up :-(
and another qestion if the card is death can i go back in the shop and use wariaty to repair card of get money back ?? can they recognize is in the card is flash bios ?
thanky for you reply
Uninstall drivers with ddu in windows safe Mode. Windows installs the standard driver.
Plug in the "destroyed" card.
Now you can flash the original VBIOS, if you are lucky.
Hi today is my lucky day card is back and mine stable 13,1 - 13,3 im sooo hapy Roland sooo much thank you
you are relly expert you make my day thx
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung),
thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type
Hello,
i watch witch gpuz all of my card have micron memory and there is my original bios
http://www100.zippyshare.com/v/Ubo6i4Fq/file.html
with new driver i can take 13,1 with original bios with overclock and this is stable pls can mod my original bios to take more mh
and one more qestion when i flash bios i do this with only one card in same time not more gpu in motherboard ?
thx for help me
13,1 is a good hashrate for your card.
I think you have the 6000MHz memory (1500x4), it only work up to 1950
.I can unlock the 16 shaders, but the bottle neck is the memory. The card will not hash faster.
Hello,
yes i have 6000Mhz memory i flash bios but in one card i use difrend bios they have memory set to 2200 after restar card dont work when is she in pc ther resrating again and again its gpu destroyed or i have litle chance to rescue this card
i know i fuck this up :-(
and another qestion if the card is death can i go back in the shop and use wariaty to repair card of get money back ?? can they recognize is in the card is flash bios ?
thanky for you reply
Uninstall drivers with ddu in windows safe Mode. Windows installs the standard driver.
Plug in the "destroyed" card.
Now you can flash the original VBIOS, if you are lucky.
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung),
thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type
Hello,
i watch witch gpuz all of my card have micron memory and there is my original bios
http://www100.zippyshare.com/v/Ubo6i4Fq/file.html
with new driver i can take 13,1 with original bios with overclock and this is stable pls can mod my original bios to take more mh
and one more qestion when i flash bios i do this with only one card in same time not more gpu in motherboard ?
thx for help me
13,1 is a good hashrate for your card.
I think you have the 6000MHz memory (1500x4), it only work up to 1950
.I can unlock the 16 shaders, but the bottle neck is the memory. The card will not hash faster.
Hello,
yes i have 6000Mhz memory i flash bios but in one card i use difrend bios they have memory set to 2200 after restar card dont work when is she in pc ther resrating again and again its gpu destroyed or i have litle chance to rescue this card
i know i fuck this up :-(
and another qestion if the card is death can i go back in the shop and use wariaty to repair card of get money back ?? can they recognize is in the card is flash bios ?
thanky for you reply
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung),
thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type
Hello,
i watch witch gpuz all of my card have micron memory and there is my original bios
http://www100.zippyshare.com/v/Ubo6i4Fq/file.html
with new driver i can take 13,1 with original bios with overclock and this is stable pls can mod my original bios to take more mh
and one more qestion when i flash bios i do this with only one card in same time not more gpu in motherboard ?
thx for help me
13,1 is a good hashrate for your card.
I think you have the 6000MHz memory (1500x4), it only work up to 1950
.I can unlock the 16 shaders, but the bottle neck is the memory. The card will not hash faster.
@xmanek:
If you flash the bios for one GPU it is only applied to one GPU.
If you flash the bios for one GPU it is only applied to one GPU.
Hello,
ok and pls can you help me to mob my original bios ?? or roland
thanks a lot
You only must copy the 1625 or lower straps to work well.
Hello,
sorry for spam but my englis is so bad i try find the bios to work with me card but i have fera to damage my card wrong bion pls can you post link for the good bios thank you so much
thank you for you time waste for me i know im noob
in my card bios i have last number 1:1500 and i must copry lower freqency 3 back ?? i have 1:1000, 1:1250, 1:1375, 1:1425, last 1:1500 right is to i copy from 1:1250 in to 1:1350 and 1:1375 and 1:1500 ?? this is all ?? and after pach the gpu ??
and when i open polaris bios edito this show me :
unsuported device 0x67EF continue ? this is show me when i load original bios this is ok ??
tkan you for reply me
@xmanek:
If you flash the bios for one GPU it is only applied to one GPU.
If you flash the bios for one GPU it is only applied to one GPU.
Hello,
ok and pls can you help me to mob my original bios ?? or roland
thanks a lot
You only must copy the 1625 or lower straps to work well.
Jump to: