SRBPolaris V3.5 - BIOS editor for AMD RX4XX and RX5XX cards - page 21.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Wolf0 on July 04, 2017, 09:51:25 AM

Quote from: doktor83 on July 04, 2017, 09:49:52 AM

Quote from: Wolf0 on July 04, 2017, 09:36:15 AM

Quote from: doktor83 on July 04, 2017, 08:27:44 AM

V2.66

- Just added support for a few 5XX and 4XX cards

https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g

Just a question, are you having issues finding the timing "straps" (the clock dependent memory parameters) for some VBIOSes?

I mean, in an automated fashion.

No, it's not because of the straps, it's because of the default gpu/mem freq. values, and a pointer for the vddc value. Their offsets differ depending is the card a 460/560 etc.
Probably there is a more elegant way of finding these values, but i really did not spend much time on finding it

Not what I was asking - I'm asking in general, not because of the new support.

Oh, i think i don't have issues with finding straps, it works in an "automated" fashion , i mean im not defining it for every card by hand or something.
Now i don't check every timing if it is valid, if it looks good, it must be good Cheesy

bardacuda

sr. member

Activity: 430

Merit: 254

What's the best (fastest) OS/driver/miner combo for dagger/hashimoto on these cards (assuming all your voltage and timing mods have already been done on the bios)?

I am guessing it is linux/gpupro/sgminer, but what about xorg or fglrx drivers or claymore's miner?

Or is there even a noticable difference from win+claymore or win+ethminer?

AlainC

member

Activity: 91

Merit: 10

Quote from: Wolf0 on July 04, 2017, 09:51:05 AM

You need to edit VoltageObjectInfo such that you tell the driver to send the correct I2C codes (see your VRM controller's datasheet for which.)

hum, it seems I have to use "AtomBiosReader"... new to me, I will investigate . I'm now comfortable with PBE/SRBPolaris, but AtomBiosReader seems less noob friendly. Last time I disassembled a binary image, 1 Tflops was a dream to install in a secret military building. Grin

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Wolf0 on July 04, 2017, 09:36:15 AM

Quote from: doktor83 on July 04, 2017, 08:27:44 AM

V2.66

- Just added support for a few 5XX and 4XX cards

https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g

Just a question, are you having issues finding the timing "straps" (the clock dependent memory parameters) for some VBIOSes?

I mean, in an automated fashion.

No, it's not because of the straps, it's because of the default gpu/mem freq. values, and a pointer for the vddc value. Their offsets differ depending is the card a 460/560 etc.
Probably there is a more elegant way of finding these values, but i really did not spend much time on finding it

AlainC

member

Activity: 91

Merit: 10

Quote from: Wolf0 on July 02, 2017, 08:10:46 PM

You need to do a PROPER undervolt to the VBIOS if you want it to work in Linux. I can do these, usually.

What is proper undervolt ?
My numerous tentatives show MaxPower and TBP (110->90W) have great effect on power consumption, but undervolting with SRBPolaris of PBE is not visible on the plug...
It seems it is advised to put same voltage for VDDCI and VDDC for the GPU. is it ?
I've tested recently VDDCI950/VDDCGPU950mV (but increased TBP/Maxpower)... not so huge, but very stable. Am I on the good direction?

doktor83

hero member

Activity: 2548

Merit: 626

V2.66

- Just added support for a few 5XX and 4XX cards

https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g

zhangyx1

newbie

Activity: 9

Merit: 0

@doktor83

new bios powercolor amd rx 460 2g (elpida )

http://www.filedropper.com/462

thx

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: blissz on June 29, 2017, 06:24:42 AM

Great editor! I finally managed to set the correct voltage on my msi rx480 without having to set it in the claymore miner. This means I can now run my rig undervolted in linux (I guess). Will send some "support" when it runs ok in linux. Thanks for this!

hmmz cheered too early. Still got no succes: when I set 800mv as voltage it runs at about 880mv. (consumes upto 100watt more for 5 cards). Any idea howto fix this?

880mV is great, i don't believe you could get it mining at 800mV.
Anyways, if static voltage isn't working for you, try putting in a pointer value (like 65285)

Branko

sr. member

Activity: 2632

Merit: 328

There is also Gigabyte RX 560 card with hynix memory, this is bios for it:

https://www.techpowerup.com/vgabios/192228/192228

Funny part is, it has strap for 2250, but you can't OC it that high
through Wattman

I wonder which version is better, one with micron, or hynix memory

blissz

sr. member

Activity: 336

Merit: 258

Great editor! I finally managed to set the correct voltage on my msi rx480 without having to set it in the claymore miner. This means I can now run my rig undervolted in linux (I guess). Will send some "support" when it runs ok in linux. Thanks for this!

hmmz cheered too early. Still got no succes: when I set 800mv as voltage it runs at about 880mv. (consumes upto 100watt more for 5 cards). Any idea howto fix this?

doktor83

hero member

Activity: 2548

Merit: 626

V2.65

- Added support for PowerColor RX460 2G
- Fixed a bug with VDDC pointer change

https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: zhangyx1 on June 28, 2017, 06:56:03 AM

@doktor83

new bios powercolor amd rx 5460 2g (hynix )

http://www.filedropper.com/dilan462hy

thx

This is a red dragon 460 2g, not 560.
Will add support soon.

zhangyx1

newbie

Activity: 9

Merit: 0

@doktor83

new bios powercolor amd rx 5460 2g (hynix )

http://www.filedropper.com/dilan462hy

thx

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: cougarmaster on June 25, 2017, 07:16:25 AM

Hi all,

Just to update on the tuning of the cards running at 15.xx MH/s with GPU at 1000Mhz RAM at 1990Mhz Power limit set to -5 fan speed set to 60% temps are at about 57c at 40watts all using MSI Afterburner.

Sshot or it didn't happen

exofun

newbie

Activity: 2

Merit: 0

Thanks for reply man. But with original bios works all fine. This problem is only if i update edited bios. Sad

doktor83

hero member

Activity: 2548

Merit: 626

you don't have a problem with the bios editor, you have a problem with the video drivers you are using.

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: doktor83 on June 11, 2017, 12:07:15 PM

Quote from: niko2004x on June 11, 2017, 11:57:23 AM

Quote from: Wolf0 on June 11, 2017, 08:03:45 AM

and then you need to go to the padding between the legacy VBIOS & the UEFI one, and remove enough such that the VBIOS image remains the same size

There are very rare bioses where it (remove part of the padding) is not possible.

so how do you add anything extra in those kind of bioses?

You get real creative. Find anything that you can remove. ANYTHING that can be thrown out must go.

exofun

newbie

Activity: 2

Merit: 0

Hello,
please can someone add support to bios editor for "Gigabyte Radeon RX 560 GAMING OC 4G"
http://imgur.com/l8To1gF
I can open bios file. But if i try to change memory clock and that flash bios something is wrong with drivers after reboot. There is a yellow exclamation mark in devices manager on Radeon rx560. GPU running like in safemode.

My original bios backup https://www.techpowerup.com/vgabios/193045/193045

Realy thanks for any solutions

sedde

newbie

Activity: 43

Merit: 0

I am willing to pay someone to undervolt my cards to my specifications so i can run a cool linux rig.

Anyone interested even the op, hit me up.

cougarmaster

newbie

Activity: 3

Merit: 0

Hi all,

Just to update on the tuning of the cards running at 15.xx MH/s with GPU at 1000Mhz RAM at 1990Mhz Power limit set to -5 fan speed set to 60% temps are at about 57c at 40watts all using MSI Afterburner.

Topic: SRBPolaris V3.5 - BIOS editor for AMD RX4XX and RX5XX cards - page 21. (Read 125165 times)