Topic: Swedish ASIC miner company kncminer.com - page 1360. (Read 3050074 times)

Depends: Did it get delivered on time so that I could have used my 4k receiver and my PS with it? (Which I bought extra for it?)

Lol no one else here cares for or about our discourse, kid.

If you can't remember what was said 15 minutes ago no amount of patching up proper quotes is going to help you.

And btw, you accomplished nothing with your previous post. I very much doubt, however, that that worries you much based on your contributions thus far.

And every one of their customers CHOSE to buy into an unproven company in an unproven market. Do you cry to Best Buy when you bleed from buying a Cutting Edge 4k TV and there's no content widely available? Probably so, nm.

When you reply to something, it helps to include the previous message, so it's in context. Let me just fix that for you MrDampCock.





Nope. Only to keep calling you MrDampCock MrDampCock.

dampcock....isnt that a good thing? better than drycock?

@Bitcoinorama: the sad part about you getting nearly no btc in donation is that my first btc per Jupiter mined would have gone to you. Regrettably, I still don't have my day 2 oder.
@The guy who only mined 12 btc until now and thinks 1,5 btc per day compensatio is too much: screw yourself! If I had my unit in hand and had made 12 btc out of it I would certainly not be here complaining about compensation. Sad fact is I did not even have a chance at tweaking my unit and getting maybe more out of it.

KnC CHOSE to send all UPS info at once.(>15 days before shipping for some)
KnC CHOSE to state they can make an ASIC but can not edit a production que.
KnC CHOSE to avoid a logistical nightmare even if it made nightmare for paying customers.
KnC CHOSE to create a ToS that can contradict public statements made by Sam and repeated by 'others'.
KnC CHOSE to not refund until the unit shipped.
KnC CHOSE to bank as much profit as possible even if it affects some customers in a negative way.

Your implication seems to be that KnC has no choice.
They _DO_ have a choice.
They chose self and not customer in some situations.

The result of their choices MIGHT be argued but not by stating they had no choice.

IMneverHO
------------------------------------------------------------------
I have a quick tech question.
Do the PSU's that don't play nice violate the ATX spec for overcurrent or overvoltage?

Thx in advance!

EDIT spelling, 2 different spelling of same word in same sentence even

I don't threaten to use ignore, I just use it. I find children fascinating, so I enjoy watching you disassemble your own arguments. My comment was regarding how fast your tag will become yellow, and I stand by it. Anyone want to set up a 12 month BTC bet?

Altering a name in order to make fun of it? That is some seriously high-level kindergarten skills, I for one congratulate you. One day, your balls will drop and hopefully you'll grow out of your little-man syndrome. Or not.

"I'm not bothered by what you say. Well, only enough to respond and feign indifference."
Right on.

I thought you had me on ignore?

And let me remind you of the statement I made that inspired you to put me on ignore:

It still stands.

Bitcoinorama, let us know if we can buy more pre-loaded beagleboards so we can split up our Jupiters.

Don't worry, it is just cosmetics, I don't want to argue about performance issues with you ever again

May I ask how the custom control PCB is mounted to the BBB?  Or are you saying that the BBB is actually a custom board, e.g. USB and 5 volt connector removed.  If the latter, what other differences are there?

 Also, the BBB draws relatively low current on its 5volts.  KnC isn't providing a 12v to 5v buck converter onboard so was expecting to draw it from the BBB if initial photos are correct, those showing the BBB USB and 5v power connector.  But the 5v power connect would be an orphan looking to a typical computer switching supply at least without an adapter.  So, rather than a plugin adapter, 4 pin molex to the 5 volt barrel, they brought out a 4 pin molex and got rid of the 5 volt barrel connector saving a bit on that part.  Likely did away with the USB for more reasons than just saving a few cents on parts, like users hanging USB block erupters off the USB and generally screwing things up.  So, do you know if anything on the main board uses 5 volts or is the only thing using the 5 volts the BBB?

Darn, I wonder if my posts get a global ignore.

I believe the policy was refunds up to the point of your order shipping. I was denied a refund two weeks ago, and my order has yet to ship.

You go so far out of your way to show the community how infantile you are. Why?

And THAT somehow matters to you all of a sudden?

LMAO let he who is without off-topic FUD throw the first stone.

Firstly, they have proved a working product, so either you work for them or not, based on what you keep reiterating.

Secondly, STOP BEING A FUCKING PUSSY.

EITHER:
1. Tell them you will NOT handle communication
OR
2. Handle communications.

It's that simple.

Stop all this in-between bullshit. All this "It's not my responsibility, but here is the latest speculation" and the woeful "Poor me, poor me, everyone is treating me so harsh. Poor me, poor me..." posts.

It's far too easy for you to spout bs and then KNC can say "Oh but he's not our employee, nothing he said is official KNC statement".

It's all your own fault you are feeling pressure. Do either 1 or 2 to resolve it.

If 1, another thing you need to tell KNC is they need a person on this forum to handle communications and updates.

Frankly, as KNC are paying for your hotel and expenses, I think you owe it to them to take full responsibily for communications.

That way, if you decide not to work for them, at least you have provided a service and shouldn't feel bad about they money they are throwing at you in expenses. Otherwise you wil feel indebted to them. Not good.

See? Look at all this help I'm offering.

But the simple solution is - if it's too hot for you in here, get out of the kitchen.

Go back to the UK, move back in with your parents, go back to flipping burgers or whatever it is you do. I mean, it can't be serious, if you can take 2 weeks off on a whim can it?

Shit or get off the pot. Take the heat or retire. And stop whinging about how hard it is on you. That how jobs are.

thanks D&T

I will keep this in mind.  I have done some real cooling on the troubled miner (it now is in front of the airflow of an A/C unit and still fan on top and shrouding) which has them all running under 50C now.   Without cooling you easily see high 60's to 70

ASIC slot #1: 45.0 ℃
ASIC slot #2: -
ASIC slot #3: 49.5 ℃
ASIC slot #4: 42.5 ℃
ASIC slot #5: 48.5 ℃
ASIC slot #6: -


And yes, I would love to have just bought some more beagleboards but they will need to offer them to us.  Not sure why it would be a problem?  Better hashing and better cooling.. The big dips in my graphic shows when I was splitting them up and running them for 10-15mins each

yes if I can get that core back up, even with .95 lesser performance, that would be better situation and less total watts.  I may try again now that I know I have 420Gh to fall back on

solo mining is way off topic here and given what you just said it appears providing you with that address wouldn't help solve your skepticism anyways.

as far as what i've claimed about my soloing, it is absolutely the truth.  you just need to know how to do it.

Well, you may have used the address you used as a coinbase output for other purposes, you may not. I'm not really interested in what you spend your Bitcoins on. I just don't actually find you a credible source of "wisdom" when you claim to have recouped your costs of mining equipment via solo mining. Maybe you were lucky with your gamble, maybe you aren't telling the truth.

Without blocks, it didn't happen.

I was having a problem very similar to this with all the firmwares until I put on .95 again after trying .94, and doing a hard reset then a power cycle.  Before the hard reset, I had one board shutting off all its cores after a couple hours, dropping me into the 300 range.