I’ll defer to chipless then. 
Topic: T17 OC/OV. S17 Series OC/OV, Antminer B7 OC/OV, S9k, Z11 + others 100% FREE - page 11. (Read 10235 times)
July 01, 2019, 05:47:57 PM
Aye.. no worries. The description matches the condition I described at least on systems I’ve seen... I’ll defer to chipless then.
I’ll defer to chipless then. July 01, 2019, 05:45:45 PM
Likely the voltage setting is too high for your PSU, resulting in a reset.
Chipless May have a different answer for you though.
-j
Chipless May have a different answer for you though.
-j
hm i can't belive this because i use 2 PSU with more than enough power.
freq and volt- settings not changed first
but thanks for answer
July 01, 2019, 05:43:05 PM
Likely the voltage setting is too high for your PSU, resulting in a reset.
Chipless May have a different answer for you though.
-j
Chipless May have a different answer for you though.
-j
July 01, 2019, 05:38:34 PM
hi,
i tried your new version for z11(Antminer-Z11-Chipless-Nitro-v2.0-Public.tar.gz).
I removed SSH lock so far so good.
But after installing your firmware my miner boots up and after 1-2minutes he reboots ... and this again and again ... do you have an answer why?
Temp was not going over 80°C. First i didn't change frequency same problem.
i removed for now the firmware and with stock FW it works...
need some help please
Lars
i tried your new version for z11(Antminer-Z11-Chipless-Nitro-v2.0-Public.tar.gz).
I removed SSH lock so far so good.
But after installing your firmware my miner boots up and after 1-2minutes he reboots ... and this again and again ... do you have an answer why?
Temp was not going over 80°C. First i didn't change frequency same problem.
i removed for now the firmware and with stock FW it works...
need some help please
Lars
June 27, 2019, 02:10:54 AM
The X3 firmware is available for distribution. The file offers overclocking up to 875, .antminer malware protection, Voltage is enabled in the files but I do not know if cgminer is reading it or not I could not find any reason why it isnt. The voltage format is 0725 or 725 when you enter it. You will know if you set a voltage and get more heat without raising the freq. If it isnt working I will look into it more and try to link it otherwise it is like a Z9 voltage is untouchable. I do not know the true voltage range so you may have to experiment with that I would say a range from 0700-1500 which is 700mv to 1.5 volts. PM for purchase details
June 24, 2019, 10:48:50 PM
As I said it shows what type of person you are, childish
June 24, 2019, 09:21:34 PM
Again your childish posts.... You are one of them kind of people who just cant move on until you get your way. You are only hurting end users with it all.
What way is that? Inquiring minds, and all that.
I seem to do a lot of stuff from your perspective. I think the last time you accused me
Of something similar, I also asked for “one example”. You declined saying you didn’t have time for that.
Oh well.
-j
I am not going to sit and go back and forth with you giving examples. I told you I am moving on and you should too. Thats what is in the best interest of the end users here. From the first pm to you, you have been an asshole and threw out accusations towards me and you wonder why i react towards you the way I do. Nothing has changed and more then likely never will so just move on your an asshole. You aint worth arguing with.
“you’re”.
HTH.
HAND.
-j
June 24, 2019, 08:03:56 PM
Again your childish posts.... You are one of them kind of people who just cant move on until you get your way. You are only hurting end users with it all.
What way is that? Inquiring minds, and all that.
I seem to do a lot of stuff from your perspective. I think the last time you accused me
Of something similar, I also asked for “one example”. You declined saying you didn’t have time for that.
Oh well.
-j
I am not going to sit and go back and forth with you giving examples. I told you I am moving on and you should too. Thats what is in the best interest of the end users here. From the first pm to you, you have been an asshole and threw out accusations towards me and you wonder why i react towards you the way I do. Nothing has changed and more then likely never will so just move on your an asshole. You aint worth arguing with.
June 24, 2019, 05:48:33 PM
Again your childish posts.... You are one of them kind of people who just cant move on until you get your way. You are only hurting end users with it all.
What way is that? Inquiring minds, and all that.
I seem to do a lot of stuff from your perspective. I think the last time you accused me
Of something similar, I also asked for “one example”. You declined saying you didn’t have time for that.
Oh well.
-j
June 24, 2019, 05:44:43 PM
Again your childish posts.... You are one of them kind of people who just cant move on until you get your way. You are only hurting end users with it all.
June 24, 2019, 04:39:34 PM
Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.
Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?
The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.
Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.
After hearing back from a couple users the X1 will get between 15.5 and 17gh after oc. I do not have a x1 and am going by reported results.
Sounds great. I'm going to have to wait for some more feedback. Please post more when you get it. I link to a miner would be awesome, so we can watch it.
I doubt my clients would allow a link to their miners. Sorry. I will post any feedback I get. I will also ask them to post public their results but as you can see not many want to post here due to the ongoing issue with epudd
blaming me for that seems to be to quite a made up stretch. but good poo! still flinging it, I see.
-j
No not realy they have other business with you and dont want to post here and then getting crap from others because of the issues between the two of us. Your calling me a monkey seems a bit racist if you ask me but thats my opinion. You really need to grow up some and move on like I have moved on. Your a little two-faced if you ask me one minute you try being nice then talk shit behind my back to others. So childish, it all really shows what type of person you are, many have already stated to me that you need to move on. The only thing you are hurting is the end users because there are many who are looking for other images and you dont support those images and all you do is talk out your ass on this thread which discourages people from posting and requesting images. You may think your the king but you are nothing more then a person who when things dont go your way you become vindictive and show your ass. Have a nice day
LOL. Nope, no shit talked behind your back-- it's in public, for all to see. Find me *ONE* place where I have "talked shit behind [your] back". Honestly, anyone who has engaged me in that manner, I've declined to participate with. Keep dreamin' stuff up over there big boy.
I'll leave you with another wonderful song: https://www.youtube.com/watch?v=UrgpZ0fUixs
-j
June 24, 2019, 03:48:06 PM
Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.
Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?
The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.
Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.
After hearing back from a couple users the X1 will get between 15.5 and 17gh after oc. I do not have a x1 and am going by reported results.
Sounds great. I'm going to have to wait for some more feedback. Please post more when you get it. I link to a miner would be awesome, so we can watch it.
I doubt my clients would allow a link to their miners. Sorry. I will post any feedback I get. I will also ask them to post public their results but as you can see not many want to post here due to the ongoing issue with epudd
blaming me for that seems to be to quite a made up stretch. but good poo! still flinging it, I see.
-j
No not realy they have other business with you and dont want to post here and then getting crap from others because of the issues between the two of us. Your calling me a monkey seems a bit racist if you ask me but thats my opinion. You really need to grow up some and move on like I have moved on. Your a little two-faced if you ask me one minute you try being nice then talk shit behind my back to others. So childish, it all really shows what type of person you are, many have already stated to me that you need to move on. The only thing you are hurting is the end users because there are many who are looking for other images and you dont support those images and all you do is talk out your ass on this thread which discourages people from posting and requesting images. You may think your the king but you are nothing more then a person who when things dont go your way you become vindictive and show your ass. Have a nice day
June 24, 2019, 12:43:17 PM
Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.
Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?
The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.
Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.
After hearing back from a couple users the X1 will get between 15.5 and 17gh after oc. I do not have a x1 and am going by reported results.
Sounds great. I'm going to have to wait for some more feedback. Please post more when you get it. I link to a miner would be awesome, so we can watch it.
I doubt my clients would allow a link to their miners. Sorry. I will post any feedback I get. I will also ask them to post public their results but as you can see not many want to post here due to the ongoing issue with epudd
blaming me for that seems to be to quite a made up stretch. but good poo! still flinging it, I see.
-j
June 24, 2019, 12:35:17 PM
Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.
Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?
The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.
Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.
After hearing back from a couple users the X1 will get between 15.5 and 17gh after oc. I do not have a x1 and am going by reported results.
Sounds great. I'm going to have to wait for some more feedback. Please post more when you get it. I link to a miner would be awesome, so we can watch it.
I doubt my clients would allow a link to their miners. Sorry. I will post any feedback I get. I will also ask them to post public their results but as you can see not many want to post here due to the ongoing issue with epudd
June 24, 2019, 12:31:30 PM
with power 1800w i can set frequency 762 ?
Yes you should be ok up to about 793m and 940mv. The free version goes to 775 higher frequencies and voltage require the private version.
June 24, 2019, 12:19:38 PM
with power 1800w i can set frequency 762 ?
June 24, 2019, 11:53:48 AM
Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.
Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?
The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.
Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.
After hearing back from a couple users the X1 will get between 15.5 and 17gh after oc. I do not have a x1 and am going by reported results.
Sounds great. I'm going to have to wait for some more feedback. Please post more when you get it. I link to a miner would be awesome, so we can watch it.
June 23, 2019, 12:10:42 PM
Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.
Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?
The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.
Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.
After hearing back from a couple users the X1 will get between 15.5 and 17gh after oc. I do not have a x1 and am going by reported results.
June 22, 2019, 12:24:13 PM
thancks for answer
if i use frequency 760 i give how ksol ?
and my chip temp is higher than orginal firmware ?
if i use frequency 760 i give how ksol ?
and my chip temp is higher than orginal firmware ?
There is no 760 ..762 should give in the 146-150+ range k/sol, Yes you will get more heat as you overclock or overvolt the heat does increase as with any other miner.
June 22, 2019, 08:47:02 AM
thancks for answer
if i use frequency 760 i give how ksol ?
and my chip temp is higher than orginal firmware ?
if i use frequency 760 i give how ksol ?
and my chip temp is higher than orginal firmware ?
Jump to: