Ufasoft Miner - Windows/Linux, x86/x64, SSE2/OpenCL, Open Source - page 3.

ufasoft

sr. member

Activity: 404

Merit: 251

Quote from: gavrilo77 on January 29, 2014, 02:57:25 AM

How to set "-a scrypt" ?

Code:

coin-miner -a scrypt

gavrilo77

hero member

Activity: 819

Merit: 502

How to set "-a scrypt" ?

Thanks

ufasoft

sr. member

Activity: 404

Merit: 251

Quote from: gavrilo77 on January 29, 2014, 01:39:30 AM

~8 MHash/s[/b]

So after several hours nothing happen.

When i make set up:

coin-miner -a scrypt -v -t 4 -u user -p x -o stratum+tcp://ltcbox.net:3333 -x http=IP_PROXY:PORT

i have accepted shares but only ~12 kHash/s

If you mine LTC you should set "-a scrypt" option. By default the miner uses SHA256 algorithm.

gavrilo77

hero member

Activity: 819

Merit: 502

My set up is:

stratum_proxy.exe -o ltcbox.net -p 3333
coin-miner -v -t 4 -gpu -u xxxxx.1 -p xxxx -o http://127.0.0.1:8332

Mining for http://127.0.0.1:8332
Using CPU (4 threads)
0 kHash/s
Switching to stratum+tcp://127.0.0.1:3333
New Stratum Data with Clean
New Stratum Data with Clean
New Stratum Data with Clean
New Stratum Data with Clean
...
~8 MHash/s

So after several hours nothing happen.

When i make set up:

coin-miner -a scrypt -v -t 4 -u user -p x -o stratum+tcp://ltcbox.net:3333 -x http=IP_PROXY:PORT

i have accepted shares but only ~12 kHash/s

Can somebody explain why i dont have share in the first case only reading?

I have Intel HD 3000 laptop

ufasoft

sr. member

Activity: 404

Merit: 251

Quote from: dstevens on January 24, 2014, 05:52:15 PM

5.04 MHash/s 2 CPU threads

It is low performance. You need to wait a few hours to get mine some shares

dstevens

newbie

Activity: 39

Merit: 0

i downloaded a few different versions attempting to resolve this issue.

i connect.
it mines.
but dashboard shows nothing and payouts are 0??

-------------dos window------------

D:\1\Coin\x64>coin-miner-64 -o stratum+tcp://darrelltstevens.2:[email protected]:4444
coin-miner 0.77 Copyright (c) 2011-2013 Ufasoft http://ufasoft.com/coin
Mining for stratum+tcp://darrelltstevens.2:[email protected]:4444
Using CPU (2 threads)
New Stratum data with Clean
New Stratum data with Clean reads
New Stratum data with Clean reads
New Stratum data with Clean reads
5.04 MHash/s 2 CPU threads

------ dos window end -------------

replacing stratum+tcp:// before username with http:// makes it fail

plz help?

ufasoft

sr. member

Activity: 404

Merit: 251

relace line with error to

Code:

std::swap(m_zz, x.m_zz);

old version of libgmp has not mpz_class::swap()

Zenitur

sr. member

Activity: 362

Merit: 250

I enjoy ufasoft miner in 2011! You made a good work, guys!

Tried to compile ufasoft miner on SteamOS (Debian 7.0).

Code:

CXX el/libext/http.o
CXX el/libext/stack-trace.o
CXX el/libext/binary-reader-writer.o
CXX el/libext/murmurhash.o
CXX el/libext/bignum.o
In file included from el/libext/bignum.cpp:18:0:
./el/bignum.h: In member function ‘void Ext::BigInteger::swap(Ext::BigInteger&)’:
./el/bignum.h:307:8: error: ‘mpz_class’ has no member named ‘swap’
make[1]: *** [el/libext/bignum.o] Error 1
make[1]: Leaving directory `/home/desktop/ufasoft_coin-0.76'
make: *** [all] Error 2
desktop@steamos:~/ufasoft_coin-0.76$

ufasoft

sr. member

Activity: 404

Merit: 251

Quote from: patica on January 04, 2014, 05:04:54 PM

And now half of my namecoins are in bitparking.exchange, the other half are in ufasosf -> bad luck Undecided

You can export your keys from Ufasoft Client to standard client wallet.dat format.
Use menu File.Export.
Then you will be able to control your coins

patica

newbie

Activity: 51

Merit: 0

Hi, I have e problem with the program. I use it for namecoin vallet, Win7 64 bit.
Here are some errors:
http://imagizer.imageshack.us/v2/150x100q90/850/b7tg.jpg http://imagizer.imageshack.us/v2/150x100q90/819/rzyb.jpg http://imagizer.imageshack.us/v2/150x100q90/812/kqj4.jpg http://imagizer.imageshack.us/v2/150x100q90/585/gqlb.jpg http://imagizer.imageshack.us/v2/150x100q90/59/mfpb.jpg

I have delete folder ....\AppData\Roaming\Ufasoft\Coin\ , add (or no - no differences) my vallet, restart pc, launch the program and the same and the same...
I think the problem file is Namecoin.udb - see the last picture. When I rename it, the process start from beginning, but stops on 536 870 912 bytes. Just ones it goes to 805... bytes

And now half of my namecoins are in bitparking.exchange, the other half are in ufasosf -> bad luck Undecided

gorgon666

member

Activity: 92

Merit: 10

Quote from: ufasoft on February 14, 2011, 10:14:08 PM

http://ufasoft.com/open/bitcoin/
Works under Windows and Linux with full GPL Source Code

Windows binary, version 0.39 (2012-Dec).

Linux binaries, compiled by K1773R

Last Changes:

Stratum protocol support
BIP22 protocol support

i have an acer netbook win 7 starter intel r graphics media accelerator 3600 series ive tried ming i know that my gpu is not accepted is there another miner program that i could use to mine bitcoin or would a laptop with a different gpu idk what it is be better or can you be nice enpough to tell me what i cand do/use to mine some bitcoins thanks

silajim

newbie

Activity: 8

Merit: 0

I am trying to compile the 0.76 version, but i always have this problem:

Code:

jwasm -DX64=1 -10 -elf64 -nologo -zcw -c -Focoin/miner/bitset-op.o -Iel/comp coin/miner/bitset-op.asm
coin/miner/bitset-op.asm(148) : Error A2170: Invalid use of register

any help? i am using the 2.11v of jwasm and the latest gcc.

LDA

newbie

Activity: 87

Merit: 0

Hi ufasoft,

I'm interested in begin working with BitCoin mining, I have good experience with computers but very few experience with BTC mining and I would be very thankful if you could help. I'm looking for a bitcoin mining application that meet my requirements:

1) I have several computers at my office and I would like to put them to work for BTCs. How should I do it? I mean, can I install a client and provide my login details to it? Each client will receive proper information to work on different crypto? Or all of them will do the same work and I will lose the advantage of multiple computers? What is the proper solution? A kind of concentrator? Clients suggestion?

2) Preferable I want a client for Windows (since all my computers are windows based) and that are able to be called / executed via command line (no graphical interface). This will help a lot to automate the process and waste time going box by box to install and configure it.

3) Also, is there a client with these requirements that allows both CPU and GPU? Preferable a client that is able to find all my CPU cores and GPUs and put them to work. Suggestions?

4) Another very important feature, is there a option to define at this client that it should only use idle time of these computers?

Thanks a lot.

Flowz

member

Activity: 114

Merit: 10

Bitcoin = Money for the people, by the people.

Quote from: ufasoft on October 25, 2013, 12:45:08 AM

Quote from: Flowz on October 24, 2013, 03:38:17 PM

Still on 0.29 by the way.

The main problem is your version 0.29.
It was released years ago. Many bugs are fixed already.
Use latest 0.75:
http://ufasoft.com/files/ufasoft_coin-0.75.tar.xz

I got it compiled, thank you for all your help!

ufasoft

sr. member

Activity: 404

Merit: 251

Quote from: Flowz on October 24, 2013, 03:38:17 PM

Still on 0.29 by the way.

The main problem is your version 0.29.
It was released years ago. Many bugs are fixed already.
Use latest 0.75:
http://ufasoft.com/files/ufasoft_coin-0.75.tar.xz

Flowz

member

Activity: 114

Merit: 10

Bitcoin = Money for the people, by the people.

Quote from: ufasoft on October 24, 2013, 02:16:27 PM

Use following defines

Code:

#define UCFG_BITCOIN_USE_CAL 0
#define UCFG_BITCOIN_USE_CUDA 0

CUDA and CAL IL are obsolete features of the miner. I don't support and test them anymore

Hi,

Still on 0.29 by the way.
I disabled miner-cuda.cpp as UFCG_BITCOIN_USE_CUDA is defined nowhere, disabling CAL just causes me to have more errors, I'd rather not deal with and just keep it in. I noticed that the CAL uses a pre-build event so it isn't dynamically loaded and should not cause any problems when kept in.

Pre-compiled binary works fine with my GPU (Nvidia GT9800) but my binary reports 0MH/s, doesn't crash tho.
On closing, a lot of BitFORCE threads close and the Win32 thread.

I've been posting a lot of question, I know your time is precious and you're doing this out of free will.
If you'd rather have shut up I understand and I take no offence if you want me to. Prioritizing is important in life, and I rather not feel guilty of causing you to waste time. You can expect a nice donation when I finally compile this tho!

ufasoft

sr. member

Activity: 404

Merit: 251

Use following defines

Code:

#define UCFG_BITCOIN_USE_CAL 0
#define UCFG_BITCOIN_USE_CUDA 0

CUDA and CAL IL are obsolete features of the miner. I don't support and test them anymore

Flowz

member

Activity: 114

Merit: 10

Bitcoin = Money for the people, by the people.

Quote from: ufasoft on October 24, 2013, 12:48:28 PM

Quote from: Flowz on October 24, 2013, 11:23:58 AM

Also, when looking over phatk.ptx (CUDA) I noticed a lot of local paths! Do these have to be present on the computer?

No local paths required at RunTime.
And .ptx can be generated dynamically from .cl file. So it is not necessary to save it as resource.

Hi,

When I compile without adding the .PTC file (extracted from your pre-compiled bitcoin-miner.exe) it seems to fail.
"ERROR 8000716: The specified resource name cannot be found in the image file"

Which has lead me to believe I need NVCC to compile this project correctly (for runtime).
Do I have to add some extra parameters somewhere (like -ptx)?

ufasoft

sr. member

Activity: 404

Merit: 251

Quote from: Flowz on October 24, 2013, 11:23:58 AM

Also, when looking over phatk.ptx (CUDA) I noticed a lot of local paths! Do these have to be present on the computer?

No local paths required at RunTime.
And .ptx can be generated dynamically from .cl file. So it is not necessary to save it as resource.

Flowz

member

Activity: 114

Merit: 10

Bitcoin = Money for the people, by the people.

Quote from: ufasoft on October 23, 2013, 01:55:50 PM

Quote from: Flowz on October 23, 2013, 01:52:50 PM

How would one go about adding them in the RCDATA?

You should have following lines in the .rc file:

Code:

PHATK.CL RCDATA "phatk.cl"
SCRYPT.CL RCDATA "scrypt.cl"

Hi,
I extracted the other RCData component (PHATK.PTX, and BTC.IL and BTC-EVERGREEN.IL) from a binary you built, with Resource Hacker.
I then saved them under the correct names (found in resource.h) and added them to the project.
I suppose this isn't the correct way of doing it but it should work right?

Also, when looking over phatk.ptx (CUDA) I noticed a lot of local paths! Do these have to be present on the computer?

Thanks a lot!

Topic: Ufasoft Miner - Windows/Linux, x86/x64, SSE2/OpenCL, Open Source - page 3. (Read 631037 times)