Topic: [Ultracoin] [Est. Feb 2014] ~ ASIC Resistant & Ultrafast 6 Second Transactions! - page 158. (Read 381018 times)
February 16, 2015, 05:28:09 PM
worth to invest? any news coming?
February 16, 2015, 10:46:28 AM
UTC needs to wait as cryptsy is undergoing upgrade.
February 16, 2015, 10:45:30 AM
Its strange that for no reason they suspended UTC wallet. There were no recent updates whatsoever but still the message says - reason - updating to last version bla bla bla . Can someone from the dev team shed some light on what is going on with that problem?
Please be patient with Cryptsy- we need them. They take a awhile to do the upgrades. Part of the process is going over the changes that have been made to the wallet since the last upgrade. They have to be thorough as they are depending on our wallet and have a significant amount of UTC going through their system to protect. We are in contact with them and have been answering questions when needed. And we will keep pinging them until they have the wallet back online.
ok, ok... 
February 13, 2015, 03:16:13 PM
For like 2 hours I am trying to setup my 280X to mine UTC and it's a pain in the ass .
I tried all setups possible from Ultraminer or YACMiner
And ALL I GET is HW errors and Error -4: Enqueueing kernel onto command queue.
I even tried setups from this website : http://cfg.ultracoin.net
AND NOTHING . Is this coin minable ? Or only OP's are knowing how to mine ? :| What is this bs ?!
I don't know how this community expect support when they cannot give support on miners . It sucks .
I tried all setups possible from Ultraminer or YACMiner
And ALL I GET is HW errors and Error -4: Enqueueing kernel onto command queue.
Quote
-R 1280 -g 1 -w 128 --buffer-size 1295 --lookup-gap 24 --gpu-engine 1200 --gpu-memclock 1500 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600
- YACMINER CFG 1Quote
-R 2560 -g 1 -w 128 --buffer-size 2590 --lookup-gap 24 --gpu-engine 1200 --gpu-memclock 1500 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600
- YAC MINER CFG 2Quote
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 8 -w 128 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale
- UltraMiner CFG1Quote
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --worksize 128 -g 2 --lookup-gap 4 --thread-concurrency 16384 -I 10
Ultra Miner CFG 2Quote
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --worksize 256 -g 2 --lookup-gap 8 --thread-concurrency 16384 -I 10
ULTRAMINER CFG 3I even tried setups from this website : http://cfg.ultracoin.net
AND NOTHING . Is this coin minable ? Or only OP's are knowing how to mine ? :| What is this bs ?!
I don't know how this community expect support when they cannot give support on miners . It sucks .
try buffer-size 2590, R 1280, just to test if it works. Lookup gap... 16.
February 15, 2015, 09:26:32 PM
Its strange that for no reason they suspended UTC wallet. There were no recent updates whatsoever but still the message says - reason - updating to last version bla bla bla . Can someone from the dev team shed some light on what is going on with that problem?
Please be patient with Cryptsy- we need them. They take a awhile to do the upgrades. Part of the process is going over the changes that have been made to the wallet since the last upgrade. They have to be thorough as they are depending on our wallet and have a significant amount of UTC going through their system to protect. We are in contact with them and have been answering questions when needed. And we will keep pinging them until they have the wallet back online.
February 15, 2015, 05:08:38 PM
Yeah, there are much wallets on cryptsy in maintenance this time... But it takes a bit long now.
Has anyone more information about that?
Another IMHO important thing, who can update the website?
http://ultracoin.net/exchanges.html is *way* outdated.
Has anyone more information about that?
Another IMHO important thing, who can update the website?
http://ultracoin.net/exchanges.html is *way* outdated.
February 15, 2015, 03:01:16 PM
Its strange that for no reason they suspended UTC wallet. There were no recent updates whatsoever but still the message says - reason - updating to last version bla bla bla . Can someone from the dev team shed some light on what is going on with that problem?
February 15, 2015, 02:19:39 PM
ah - OK
well I guess Cryptsy will be open again soon.
Thanks
well I guess Cryptsy will be open again soon.
Thanks
It was shut down before because of wallet maintenance at Cryptsy during the retarget transition. No one came back after. And we're in the same situation now- wallet maintenance. The multipool depends on Cryptsy to have an operational UTC wallet to send UTC back to the pool for payouts.
Hi Kracko
I was planning to hit the UTC TumblingBloc multipool with some SHA256 in a couple of days time for a test.
I note that there is no activity on the MultiPool.
http://multi.tumblingblock.com/
Is there a problem here - or is it just simply nobody mining Multipool?
Thanks - usukan
I was planning to hit the UTC TumblingBloc multipool with some SHA256 in a couple of days time for a test.
I note that there is no activity on the MultiPool.
http://multi.tumblingblock.com/
Is there a problem here - or is it just simply nobody mining Multipool?
Thanks - usukan
February 15, 2015, 02:02:27 PM
It was shut down before because of wallet maintenance at Cryptsy during the retarget transition. No one came back after. And we're in the same situation now- wallet maintenance. The multipool depends on Cryptsy to have an operational UTC wallet to send UTC back to the pool for payouts.
Why Cryptsy...WHY?!? Hi Kracko
I was planning to hit the UTC TumblingBloc multipool with some SHA256 in a couple of days time for a test.
I note that there is no activity on the MultiPool.
http://multi.tumblingblock.com/
Is there a problem here - or is it just simply nobody mining Multipool?
Thanks - usukan
I was planning to hit the UTC TumblingBloc multipool with some SHA256 in a couple of days time for a test.
I note that there is no activity on the MultiPool.
http://multi.tumblingblock.com/
Is there a problem here - or is it just simply nobody mining Multipool?
Thanks - usukan
February 15, 2015, 12:13:20 PM
It was shut down before because of wallet maintenance at Cryptsy during the retarget transition. No one came back after. And we're in the same situation now- wallet maintenance. The multipool depends on Cryptsy to have an operational UTC wallet to send UTC back to the pool for payouts.
Hi Kracko
I was planning to hit the UTC TumblingBloc multipool with some SHA256 in a couple of days time for a test.
I note that there is no activity on the MultiPool.
http://multi.tumblingblock.com/
Is there a problem here - or is it just simply nobody mining Multipool?
Thanks - usukan
I was planning to hit the UTC TumblingBloc multipool with some SHA256 in a couple of days time for a test.
I note that there is no activity on the MultiPool.
http://multi.tumblingblock.com/
Is there a problem here - or is it just simply nobody mining Multipool?
Thanks - usukan
February 15, 2015, 12:11:36 PM
I would like to hire rig. anyone interested?
February 15, 2015, 02:36:14 AM
Hi Kracko
I was planning to hit the UTC TumblingBloc multipool with some SHA256 in a couple of days time for a test.
I note that there is no activity on the MultiPool.
http://multi.tumblingblock.com/
Is there a problem here - or is it just simply nobody mining Multipool?
Thanks - usukan
I was planning to hit the UTC TumblingBloc multipool with some SHA256 in a couple of days time for a test.
I note that there is no activity on the MultiPool.
http://multi.tumblingblock.com/
Is there a problem here - or is it just simply nobody mining Multipool?
Thanks - usukan
February 13, 2015, 04:07:24 AM
Hey Kracko - please keep the 3% fee
Its better for UTC in the long term
Thanks usukan
Ahhhhhhh complain, complain and complain more .... Everyone thinks only of himself!
Everywhere you have to pay.
At your banking institution
With your credit card company
For your mortgage.
At your car dealer.
Everywhere you have to pay and give interest.
Please remember one thing:
The current management team does everything out of love and with motivation for UTC.
They had never received any financial interest at the start. NON! ZERO !
The current management team spent a lot of private time for developments for UTC.
Private time they could spend easily on something else but they did spent it on UTC.
In addition the management team spent a lot of private money to UTC.
Please listen carefully !
They spend private money to UTC !!!!
To make UTC better !
For you ! For me ! For all of us !
So what we are complaining about ?
Pool fees are necessary.
Just see it as a bank or as your mortgage !
The pool fees are there to break even with all the cost the management team pays everytime from their own pockets.
Stop whining and complaining.
Or please, please go away !
Agreed +100
^^^This. This absolutely hurts UTC more than anything else.
Its better for UTC in the long term
Thanks usukan
[Show the miners mercy and make it 0% across the board (encourage donation)? 1% will make everyone happier, I promise
Ahhhhhhh complain, complain and complain more .... Everyone thinks only of himself!
Everywhere you have to pay.
At your banking institution
With your credit card company
For your mortgage.
At your car dealer.
Everywhere you have to pay and give interest.
Please remember one thing:
The current management team does everything out of love and with motivation for UTC.
They had never received any financial interest at the start. NON! ZERO !
The current management team spent a lot of private time for developments for UTC.
Private time they could spend easily on something else but they did spent it on UTC.
In addition the management team spent a lot of private money to UTC.
Please listen carefully !
They spend private money to UTC !!!!
To make UTC better !
For you ! For me ! For all of us !
So what we are complaining about ?
Pool fees are necessary.
Just see it as a bank or as your mortgage !
The pool fees are there to break even with all the cost the management team pays everytime from their own pockets.
Stop whining and complaining.
Or please, please go away !
Agreed +100
^^^This. This absolutely hurts UTC more than anything else.
February 12, 2015, 08:28:01 PM
[Show the miners mercy and make it 0% across the board (encourage donation)? 1% will make everyone happier, I promise
Ahhhhhhh complain, complain and complain more .... Everyone thinks only of himself!
Everywhere you have to pay.
At your banking institution
With your credit card company
For your mortgage.
At your car dealer.
Everywhere you have to pay and give interest.
Please remember one thing:
The current management team does everything out of love and with motivation for UTC.
They had never received any financial interest at the start. NON! ZERO !
The current management team spent a lot of private time for developments for UTC.
Private time they could spend easily on something else but they did spent it on UTC.
In addition the management team spent a lot of private money to UTC.
Please listen carefully !
They spend private money to UTC !!!!
To make UTC better !
For you ! For me ! For all of us !
So what we are complaining about ?
Pool fees are necessary.
Just see it as a bank or as your mortgage !
The pool fees are there to break even with all the cost the management team pays everytime from their own pockets.
Stop whining and complaining.
Or please, please go away !
Agreed +100
^^^This. This absolutely hurts UTC more than anything else.
February 12, 2015, 04:46:30 PM
[Show the miners mercy and make it 0% across the board (encourage donation)? 1% will make everyone happier, I promise
Ahhhhhhh complain, complain and complain more .... Everyone thinks only of himself!
Everywhere you have to pay.
At your banking institution
With your credit card company
For your mortgage.
At your car dealer.
Everywhere you have to pay and give interest.
Please remember one thing:
The current management team does everything out of love and with motivation for UTC.
They had never received any financial interest at the start. NON! ZERO !
The current management team spent a lot of private time for developments for UTC.
Private time they could spend easily on something else but they did spent it on UTC.
In addition the management team spent a lot of private money to UTC.
Please listen carefully !
They spend private money to UTC !!!!
To make UTC better !
For you ! For me ! For all of us !
So what we are complaining about ?
Pool fees are necessary.
Just see it as a bank or as your mortgage !
The pool fees are there to break even with all the cost the management team pays everytime from their own pockets.
Stop whining and complaining.
Or please, please go away !
February 12, 2015, 03:09:21 PM
when the 1-click miner is working - I am happy to pay 3% on any UTC it makes for me
If it goes back to dev work then its just a multiplier of value in my opinion
If it goes back to dev work then its just a multiplier of value in my opinion
February 12, 2015, 07:45:36 AM
Fair enough. I've actually given the orphan rate another look and I agree, it's been much higher than I like across all the pools this week. Something happened recently, but I'm at a loss to explain it. But, I'll see what I can do to alleviate it.
Show the miners mercy and make it 0% across the board (encourage donation)? 1% will make everyone happier, I promise
I must say though, I have no sympathy for those people who stay on utc.tumblingblock.com with a 13% orphan rate average in the last 7 days...
I was donating 1.5% before we had 3% fee. I will donate again if fee go away.
February 12, 2015, 07:39:37 AM
Do you have these commands in your .bat?
setx DISPLAY :0
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_HEAP_SIZE 100
I tried it and nothing I lowered buffer also . So it's kinda sick .... HW errors . Nada , nothing . Thanks for help . I tried every possibility .
Did you try diff 1 port on pool?
February 12, 2015, 04:15:26 AM
Do you have these commands in your .bat?
setx DISPLAY :0
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_HEAP_SIZE 100
I tried it and nothing I lowered buffer also . So it's kinda sick .... HW errors . Nada , nothing . Thanks for help . I tried every possibility .
February 12, 2015, 01:36:01 AM
For like 2 hours I am trying to setup my 280X to mine UTC and it's a pain in the ass .
I tried all setups possible from Ultraminer or YACMiner
And ALL I GET is HW errors and Error -4: Enqueueing kernel onto command queue.
I even tried setups from this website : http://cfg.ultracoin.net
AND NOTHING . Is this coin minable ? Or only OP's are knowing how to mine ? :| What is this bs ?!
I don't know how this community expect support when they cannot give support on miners . It sucks .
I tried all setups possible from Ultraminer or YACMiner
And ALL I GET is HW errors and Error -4: Enqueueing kernel onto command queue.
Quote
-R 1280 -g 1 -w 128 --buffer-size 1295 --lookup-gap 24 --gpu-engine 1200 --gpu-memclock 1500 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600
- YACMINER CFG 1Quote
-R 2560 -g 1 -w 128 --buffer-size 2590 --lookup-gap 24 --gpu-engine 1200 --gpu-memclock 1500 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600
- YAC MINER CFG 2Quote
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 8 -w 128 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale
- UltraMiner CFG1Quote
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --worksize 128 -g 2 --lookup-gap 4 --thread-concurrency 16384 -I 10
Ultra Miner CFG 2Quote
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --worksize 256 -g 2 --lookup-gap 8 --thread-concurrency 16384 -I 10
ULTRAMINER CFG 3I even tried setups from this website : http://cfg.ultracoin.net
AND NOTHING . Is this coin minable ? Or only OP's are knowing how to mine ? :| What is this bs ?!
I don't know how this community expect support when they cannot give support on miners . It sucks .
What driver version you are using? Try older one 13.. something. Or buy Nvidia.. much easier.
"What is this bs ?! It sucks ." If you cannot ask nicely go mining something else ..
I notice its hard to find any support for mining of UTC .
Might be so.. .
I will allways help, but ask nicely. I sold all my Ati cards about 3 month ago, so not fresh memory. I was having same problem than you after I updated drivers to new ones to give support UTC multipool. (use DDU uninstaller) So old 13.xx could work with Yacminer. Win7 should work better than 8.
+
"Beave162
setx DISPLAY :0
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_HEAP_SIZE 100"
Jump to: