Just updated my signature to support VC.
Topic: ✪✪✪ VIRTUAL COIN ✪✪✪ | P2P VIRTUAL MONEY | VC | X11 | ReLaunch: Date Feb 2017 ✪✪ - page 81. (Read 192571 times)
June 05, 2014, 03:58:52 PM
June 05, 2014, 02:57:23 PM
If people are interested I could make a few signatures that link to this thread like the one below for promotion of this coin on this or any forum. Colours and wording can of course be changed, the one below is just an example.
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
at what level do i have to be to be able to use a sug like this one?
For a colourful signature like the one I made above you would need to be a full member or higher. I can make a simple one for members whose rank is lower than that.
- Newbie: No styling (including links) allowed. Max 50 characters.
- Jr. Member: Links allowed. Max 150 characters.
- Member: Unlimited length.
- Full: Color allowed.
- Sr. Member: Size allowed
- Hero: Background color allowed
I did not realise how restricted lower level members were until I found out the above information just now
June 05, 2014, 01:58:33 PM
so this just effects ubuntu? bloody figures. I switched to mint a few months back and I've been in love ever since. Screw ubuntu
[edit] hmmm no dice. Commented out the code and still stuck at 1611
[edit] hmmm no dice. Commented out the code and still stuck at 1611
Delete block chain data from virtualcoin folder.
only leave wallet.dat & virtualcoin.conf files in the folder.
rerun it, if you can't wait 5-10 mins, add following
/.virtualcoind addnode 83.145.61.172:49748 add
/.virtualcoind addnode 8.220.18.202:6761 add
/.virtualcoind addnode 62.21.3.96:59096 add
it should sync in no time
Did that, even tried on a fresh vps just to make sure. I get connections just fine.
June 05, 2014, 01:44:50 PM
I have updated my Signature with VC coin.
hoping others will join too.
hoping others will join too.
June 05, 2014, 01:35:42 PM
so this just effects ubuntu? bloody figures. I switched to mint a few months back and I've been in love ever since. Screw ubuntu
[edit] hmmm no dice. Commented out the code and still stuck at 1611
[edit] hmmm no dice. Commented out the code and still stuck at 1611
Delete block chain data from virtualcoin folder.
only leave wallet.dat & virtualcoin.conf files in the folder.
rerun it, if you can't wait 5-10 mins, add following
/.virtualcoind addnode 83.145.61.172:49748 add
/.virtualcoind addnode 8.220.18.202:6761 add
/.virtualcoind addnode 62.21.3.96:59096 add
it should sync in no time
June 05, 2014, 12:50:39 PM
so this just effects ubuntu? bloody figures. I switched to mint a few months back and I've been in love ever since. Screw ubuntu
[edit] hmmm no dice. Commented out the code and still stuck at 1611
[edit] hmmm no dice. Commented out the code and still stuck at 1611
June 05, 2014, 12:44:55 PM
ahhh I see what happened... when I did that commit last night your main.cpp didn't have it commented out... I need to keep a closer eye on these damn things.
I tested some versions of Linux, but noticed ubuntu 32/64 both have this bug, hope they fix it. Windows does not have this issue.
meanwhile I was able to come up with a workaround that fixes it.
This was what caused forking in the past for VC coin.
June 05, 2014, 12:41:52 PM
ahhh I see what happened... when I did that commit last night your main.cpp didn't have it commented out... I need to keep a closer eye on these damn things.
June 05, 2014, 12:22:02 PM
nope this is ubuntu 14.04 x64
yep, it is a known bug with some versions of linux including ubuntu.
comment out
"
/*
else {
if (nBits != GetNextWorkRequired(pindexPrev, this))
return state.DoS(100, error("AcceptBlock() : incorrect proof of work"));
}
*/
"
in main.cpp & recompile it.
Also delete everything in .Virtualcoin folder except wallet.dat & virtualcoin.conf file.
run new /.virtualcoind again.
June 05, 2014, 12:18:12 PM
nope this is ubuntu 14.04 x64
June 05, 2014, 12:16:48 PM
sooo struggling with the daemon and I have an issue
No matter what I do, my client keeps getting stuck @ 1611
I've tried deleting the blockchain and retrying but to no avail. Any ideas?
No matter what I do, my client keeps getting stuck @ 1611
Code:
{
"version" : 90108,
"protocolversion" : 70002,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 1611,
"timeoffset" : 0,
"connections" : 6,
"proxy" : "",
"difficulty" : 21.81917496,
"testnet" : false,
"keypoololdest" : 1401983957,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00001000,
"errors" : ""
}
I've tried deleting the blockchain and retrying but to no avail. Any ideas?
Are you using Windows client 9.1.8?
June 05, 2014, 11:51:35 AM
sooo struggling with the daemon and I have an issue
No matter what I do, my client keeps getting stuck @ 1611
I've tried deleting the blockchain and retrying but to no avail. Any ideas?
No matter what I do, my client keeps getting stuck @ 1611
Code:
{
"version" : 90108,
"protocolversion" : 70002,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 1611,
"timeoffset" : 0,
"connections" : 6,
"proxy" : "",
"difficulty" : 21.81917496,
"testnet" : false,
"keypoololdest" : 1401983957,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00001000,
"errors" : ""
}
I've tried deleting the blockchain and retrying but to no avail. Any ideas?
June 05, 2014, 12:00:56 AM
If people are interested I could make a few signatures that link to this thread like the one below for promotion of this coin on this or any forum. Colours and wording can of course be changed, the one below is just an example.
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
at what level do i have to be to be able to use a sug like this one?
For a colourful signature like the one I made above you would need to be a full member or higher. I can make a simple one for members whose rank is lower than that.
- Newbie: No styling (including links) allowed. Max 50 characters.
- Jr. Member: Links allowed. Max 150 characters.
- Member: Unlimited length.
- Full: Color allowed.
- Sr. Member: Size allowed
- Hero: Background color allowed
I did not realise how restricted lower level members were until I found out the above information just now
June 04, 2014, 11:40:12 PM
If people are interested I could make a few signatures that link to this thread like the one below for promotion of this coin on this or any forum. Colours and wording can of course be changed, the one below is just an example.
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
at what level do i have to be to be able to use a sug like this one?
June 04, 2014, 11:25:58 PM
If people are interested I could make a few signatures that link to this thread like the one below for promotion of this coin on this or any forum. Colours and wording can of course be changed, the one below is just an example.
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
Nice ▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
June 04, 2014, 06:59:32 PM
If people are interested I could make a few signatures that link to this thread like the one below for promotion of this coin on this or any forum. Colours and wording can of course be changed, the one below is just an example.
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
◊◊◊◊◊ Virtual coin VGW X11 3 million total coins NO PREMINE ◊◊◊◊◊
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Depending on what member level you are will also affect what you can have as a signature too. I can make signatures depending on member level if needed.
June 04, 2014, 06:15:15 PM
ok, github "should" be current (ffs double check me though I am very new to this)
Tonight, if my head does not explode first, I will get back tackling the block explorer
Tonight, if my head does not explode first, I will get back tackling the block explorer
June 04, 2014, 03:17:17 PM
Please update github with these updated source files.
https://mega.co.nz/#!DdBSDJSb!t0V6y5_SasEu1Hn0GQbuxdpriKAmFLz7EY3-iQtXNRs
Also comment out following code in main, as some Linux OS have issues & end up causing forking, but MAC OS or Windows OS builds should NOT be commented out.
https://mega.co.nz/#!DdBSDJSb!t0V6y5_SasEu1Hn0GQbuxdpriKAmFLz7EY3-iQtXNRs
Also comment out following code in main, as some Linux OS have issues & end up causing forking, but MAC OS or Windows OS builds should NOT be commented out.
Code:
else {
if (nBits != GetNextWorkRequired(pindexPrev, this))
return state.DoS(100, error("AcceptBlock() : incorrect proof of work"));
}Rightio.
One thing though, I am not a programmer so bare with me, there are two instances of that code in main.cpp, do they both need to be commented out? And wouldn't said commenting effect mac and win builds ?
In your current code: line 2325-2329 needs to be commented (it is already commented out in your source), but if building Windows or MAC builds, comment needs to be removed. I hope it makes sense.
ha yeah, thats what was kinda screwing with me as I thought it already was.
Ok, so let me see if I have this straight, if someone wanted to pull and build this source on win they would have to modify main.ccp?
yes, so that's why I am building Windows build myself. For some reason as I mentioned some time back in this thread that some versions of Linux OS have a bug that caused it to fail & thus cause forking.
June 04, 2014, 02:23:39 PM
Please update github with these updated source files.
https://mega.co.nz/#!DdBSDJSb!t0V6y5_SasEu1Hn0GQbuxdpriKAmFLz7EY3-iQtXNRs
Also comment out following code in main, as some Linux OS have issues & end up causing forking, but MAC OS or Windows OS builds should NOT be commented out.
https://mega.co.nz/#!DdBSDJSb!t0V6y5_SasEu1Hn0GQbuxdpriKAmFLz7EY3-iQtXNRs
Also comment out following code in main, as some Linux OS have issues & end up causing forking, but MAC OS or Windows OS builds should NOT be commented out.
Code:
else {
if (nBits != GetNextWorkRequired(pindexPrev, this))
return state.DoS(100, error("AcceptBlock() : incorrect proof of work"));
}Rightio.
One thing though, I am not a programmer so bare with me, there are two instances of that code in main.cpp, do they both need to be commented out? And wouldn't said commenting effect mac and win builds ?
In your current code: line 2325-2329 needs to be commented (it is already commented out in your source), but if building Windows or MAC builds, comment needs to be removed. I hope it makes sense.
ha yeah, thats what was kinda screwing with me as I thought it already was.
Ok, so let me see if I have this straight, if someone wanted to pull and build this source on win they would have to modify main.ccp?
June 04, 2014, 01:48:54 PM
Please update github with these updated source files.
https://mega.co.nz/#!DdBSDJSb!t0V6y5_SasEu1Hn0GQbuxdpriKAmFLz7EY3-iQtXNRs
Also comment out following code in main, as some Linux OS have issues & end up causing forking, but MAC OS or Windows OS builds should NOT be commented out.
https://mega.co.nz/#!DdBSDJSb!t0V6y5_SasEu1Hn0GQbuxdpriKAmFLz7EY3-iQtXNRs
Also comment out following code in main, as some Linux OS have issues & end up causing forking, but MAC OS or Windows OS builds should NOT be commented out.
Code:
else {
if (nBits != GetNextWorkRequired(pindexPrev, this))
return state.DoS(100, error("AcceptBlock() : incorrect proof of work"));
}Rightio.
One thing though, I am not a programmer so bare with me, there are two instances of that code in main.cpp, do they both need to be commented out? And wouldn't said commenting effect mac and win builds ?
In your current code: line 2325-2329 needs to be commented (it is already commented out in your source), but if building Windows or MAC builds, comment needs to be removed. I hope it makes sense.
Jump to: