x221 squa algo on 0,13.4 if u set to mine that for some reason aergo algo it sets too may want to look into that this is on hive results it rejected shares only
Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 52. (Read 92264 times)
December 01, 2018, 10:21:59 AM
November 30, 2018, 04:31:33 PM
Hi andrucrypt
great miner seeing double Hash on HEX and big improvement for x16r
only question is why do you use winzip and not any other free Zip programs, my eval just run out on winzip and its not cheap to purchase
Thanks
O_O I use 7-zip for Windows builds and tar.gz for Linux great miner seeing double Hash on HEX and big improvement for x16r
only question is why do you use winzip and not any other free Zip programs, my eval just run out on winzip and its not cheap to purchase
Thanks
November 30, 2018, 02:57:59 PM
Hi andrucrypt
great miner seeing double Hash on HEX and big improvement for x16r
only question is why do you use winzip and not any other free Zip programs, my eval just run out on winzip and its not cheap to purchase
Thanks
great miner seeing double Hash on HEX and big improvement for x16r
only question is why do you use winzip and not any other free Zip programs, my eval just run out on winzip and its not cheap to purchase
Thanks
November 30, 2018, 07:55:00 AM
0.13.4 beta
- added algo x21s, dedal
- correct checking rejects from pools like suprnova
- improved speed of hex, hmq1725, x16r, x16s, x22i
NOTE: as always, check new optimal parameters.
- added algo x21s, dedal
- correct checking rejects from pools like suprnova
- improved speed of hex, hmq1725, x16r, x16s, x22i
NOTE: as always, check new optimal parameters.
November 30, 2018, 07:05:42 AM
Hey. When will support algorithm x21s ? Thanks
November 29, 2018, 01:23:04 PM
Have I gotten blind on the old kernel folder or is there really none for Pitcairn ?
Do you have found something I just discovered about this miner but I only have old cards here R7 370
* VERSIONS: WildRig/0.13.2 beta libuv/1.8.0 OpenCL/2.0 gcc/5.4.0
* CPU: Intel(R) Celeron(R) CPU G3930 @ 2.90GHz x64 AES-NI
* ALGO: x16r
* POOL #1: pool.minermore.com:4501
* COMMANDS: hashrate, pause, resume
[16:13:03] donation: 2%
[16:13:03] strategy: 0
[16:13:03] send-stale: no
[16:13:03] watchdog: disabled
[16:13:03] good-risers: default
[16:13:03] compiling code and initializing GPUs. This will take a while...
[16:13:03] GPU #0 [BusID: #3] [Pitcairn] AMD Radeon (TM) R7 300 Series
[16:13:03] threads: 1, intensity: 18, worksize: 0/256, cu: 8
[16:13:03] There is no suitable kernel for GPU #0: failed to open kernel-pitcairn.bin
[16:13:03] Failed to start OpenCL threads
November 28, 2018, 07:03:49 AM
Have I gotten blind on the old kernel folder or is there really none for Pitcairn ?
November 28, 2018, 06:36:24 AM
Does your miner order the GPUs according to their bus number?
wildrig orders gpu's by BusID.I do not understand because I can not understand dadal argo, but is algo equivalent to x16r, x16s argo etc?
Hash rate goes up and down. So, it became the hash rate posted in the previous post.
Yep, dedal is x16-like algo, where hashorder differ for each new job. Hash rate goes up and down. So, it became the hash rate posted in the previous post.
November 28, 2018, 03:46:08 AM
--multiple - instance --strategy 0 --send - stale --opencl - threads 2 --opencl - launch 18x0
RX 570 _ 4 G x 5
Average 30 to 40 M, maximum 64 M
I changed the setting, but since I did not see much change, I left it with the default settings.
By M you mean what, MH/s or share difficulty? RX 570 _ 4 G x 5
Average 30 to 40 M, maximum 64 M
I changed the setting, but since I did not see much change, I left it with the default settings.
People sometimes confuse speed and share difficulty.Hash rate goes up and down. So, it became the hash rate posted in the previous post.
In addition, there are times when send state or invalid share is large in less than 5 minutes from the start.
"Invalid share" or "Invalid job id"? Last one can be because of --send-stale parameter, or just because diff is low at start and you solve a lot of shares. If it really "Invalid share" - check your mem clocks. As I saw, some miners uses 2100-2200MHz for mem, which is too high and unstable for everything except Ethereum/Cryptonight(but even there this is bad).Because I did not change memory even though I raised it, I did it with the core 1300 Mhz memory 1000 MHz.
November 28, 2018, 03:37:17 AM
Does your miner order the GPUs according to their bus number?
I need to troubleshoot GPUs crashing (because yeah - they are crashing - your miner isn't being nice). Other miners have gpu reorder functionalities. I'm hoping WildRig sorts them correctly out of the box?
EDIT: just looked at the init sequence: looks like it does. +1 cookie for you!
I need to troubleshoot GPUs crashing (because yeah - they are crashing - your miner isn't being nice). Other miners have gpu reorder functionalities. I'm hoping WildRig sorts them correctly out of the box?
EDIT: just looked at the init sequence: looks like it does. +1 cookie for you!
November 28, 2018, 02:18:21 AM
--multiple - instance --strategy 0 --send - stale --opencl - threads 2 --opencl - launch 18x0
RX 570 _ 4 G x 5
Average 30 to 40 M, maximum 64 M
I changed the setting, but since I did not see much change, I left it with the default settings.
By M you mean what, MH/s or share difficulty? RX 570 _ 4 G x 5
Average 30 to 40 M, maximum 64 M
I changed the setting, but since I did not see much change, I left it with the default settings.
People sometimes confuse speed and share difficulty. In addition, there are times when send state or invalid share is large in less than 5 minutes from the start.
"Invalid share" or "Invalid job id"? Last one can be because of --send-stale parameter, or just because diff is low at start and you solve a lot of shares. If it really "Invalid share" - check your mem clocks. As I saw, some miners uses 2100-2200MHz for mem, which is too high and unstable for everything except Ethereum/Cryptonight(but even there this is bad). November 27, 2018, 10:38:22 PM
--multiple - instance --strategy 0 --send - stale --opencl - threads 2 --opencl - launch 18x0
RX 570 _ 4 G x 5
Average 30 to 40 M, maximum 64 M
I changed the setting, but since I did not see much change, I left it with the default settings.
In addition, there are times when send state or invalid share is large in less than 5 minutes from the start.
RX 570 _ 4 G x 5
Average 30 to 40 M, maximum 64 M
I changed the setting, but since I did not see much change, I left it with the default settings.
In addition, there are times when send state or invalid share is large in less than 5 minutes from the start.
November 26, 2018, 11:57:32 AM
Well done, master as always) 64 Mh/sec for 6 rx480
November 26, 2018, 09:47:08 AM
just for those who like risk, and searching new minable coins(or old one, but with changed algo)
WildRig Multi now can be used for mining coin NUMUS, with dedal algo. Right now before release of new t-rex/z-enemy AMD cards have an advantage, where RX580 equal to GTX1070Ti or so. Windows version is here
But as always - be careful and consider your risks, even old project can turn into scam or worth nothing.
WildRig Multi now can be used for mining coin NUMUS, with dedal algo. Right now before release of new t-rex/z-enemy AMD cards have an advantage, where RX580 equal to GTX1070Ti or so. Windows version is here
But as always - be careful and consider your risks, even old project can turn into scam or worth nothing.
November 25, 2018, 04:16:40 AM
thank you for a good program!
November 24, 2018, 06:09:01 PM
Hello,
There is no xevan in TODO, but has it gone?
Hi, I keep it in mind, but don't know when I start implement it.There is no xevan in TODO, but has it gone?
Hello
OK.I would appreciate your favor if additions are possible.
November 24, 2018, 12:07:02 PM
Let me know if I can do some testing for you.
Try re-download version for Windows, it should work now. And please report back, so I will recompile versions for Linux and HiveOS.Working now:
Code:
* VERSIONS: WildRig/0.13.2 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
* CPU: Intel(R) Core(TM) i5-8600K CPU @ 3.60GHz x64 AES-NI
* ALGO: x16r
* POOL #1: x16r.eu.nicehash.com:3366
* API PORT: 4002
* COMMANDS: hashrate, pause, resume
[18:05:56] donation: 1%
[18:05:56] strategy: 0
[18:05:56] send-stale: no
[18:05:56] watchdog: disabled
[18:05:56] good-risers: default
[18:05:57] compiling code and initializing GPUs. This will take a while...
[18:05:57] GPU #1 [BusID: #5] [Baffin] AMD Radeon (TM) RX 560
[18:05:57] threads: 2, intensity: 18, worksize: 0/256, cu: 16
[18:05:57] use pool x16r.eu.nicehash.com:3366 172.65.195.195
[18:05:57] Stratum set difficulty to 8.0000
[18:05:57] new job from x16r.eu.nicehash.com:3366 diff 134.22M
[18:05:57] hash order: ShvSmdSmdBlkKckBmwEchHamGroWrlEchSmdShvSknShaShb
[18:06:17] GPU #1: 10s/60s/15m 2641 n/a n/a kH/s
[18:06:17] speed 10s/60s/15m 2641 n/a n/a kH/s max: 2639 kH/s
[18:06:18] new job from x16r.eu.nicehash.com:3366 diff 134.22M
[18:06:18] hash order: ShvSmdSmdBlkKckBmwEchHamGroWrlEchSmdShvSknShaShb
* CPU: Intel(R) Core(TM) i5-8600K CPU @ 3.60GHz x64 AES-NI
* ALGO: x16r
* POOL #1: x16r.eu.nicehash.com:3366
* API PORT: 4002
* COMMANDS: hashrate, pause, resume
[18:05:56] donation: 1%
[18:05:56] strategy: 0
[18:05:56] send-stale: no
[18:05:56] watchdog: disabled
[18:05:56] good-risers: default
[18:05:57] compiling code and initializing GPUs. This will take a while...
[18:05:57] GPU #1 [BusID: #5] [Baffin] AMD Radeon (TM) RX 560
[18:05:57] threads: 2, intensity: 18, worksize: 0/256, cu: 16
[18:05:57] use pool x16r.eu.nicehash.com:3366 172.65.195.195
[18:05:57] Stratum set difficulty to 8.0000
[18:05:57] new job from x16r.eu.nicehash.com:3366 diff 134.22M
[18:05:57] hash order: ShvSmdSmdBlkKckBmwEchHamGroWrlEchSmdShvSknShaShb
[18:06:17] GPU #1: 10s/60s/15m 2641 n/a n/a kH/s
[18:06:17] speed 10s/60s/15m 2641 n/a n/a kH/s max: 2639 kH/s
[18:06:18] new job from x16r.eu.nicehash.com:3366 diff 134.22M
[18:06:18] hash order: ShvSmdSmdBlkKckBmwEchHamGroWrlEchSmdShvSknShaShb
Thank you for the quick fix.
November 24, 2018, 11:40:50 AM
Hello,
There is no xevan in TODO, but has it gone?
Hi, I keep it in mind, but don't know when I start implement it. There is no xevan in TODO, but has it gone?
November 24, 2018, 11:21:13 AM
Hello,
There is no xevan in TODO, but has it gone?
There is no xevan in TODO, but has it gone?
November 24, 2018, 11:01:34 AM
Let me know if I can do some testing for you.
Try re-download version for Windows, it should work now. And please report back, so I will recompile versions for Linux and HiveOS. Jump to: