Yes, they work in any PCI-e slot.
As for canada, you can make a purchase directly from my bitcoin only website www.bitcoingrowing.com
Thanks!
Topic: [WTS] USB Style PCI-E 1x - 16x Powered Riser Cables !! $5.95 ea 25k + Sold! - page 5. (Read 48140 times)
February 21, 2014, 02:34:58 PM
February 21, 2014, 01:31:52 PM
Plug things in with the power off, wiggle the molex cable when inserting to make sure pins line up, if it fights you, don't force it as you'll push the pins out.... Make sure the small riser card is all the way on the end of the pci-e slot, with the notch hanging over the edge. DON'T PUT THAT IN BACKWARDS!!
That should be good.
That should be good.
Thanks! One more question. I only have two 1x PCI ports(didn't realized when i purchased 3 1x risers), is it possible to plug 1x riser into 8x or 16x port without messing anything up? I can live without doing it, just keeping one on mobo interferes with setup.
February 21, 2014, 08:24:30 AM
I'm from Canada and I sent you a PM. I'd like 20 risers asap. You didn't answer so I guess you either don't ship to Canada or cannot fullfill my order anytime soon ?
February 20, 2014, 11:07:51 PM
Plug things in with the power off, wiggle the molex cable when inserting to make sure pins line up, if it fights you, don't force it as you'll push the pins out.... Make sure the small riser card is all the way on the end of the pci-e slot, with the notch hanging over the edge. DON'T PUT THAT IN BACKWARDS!!
That should be good.
That should be good.
February 20, 2014, 09:18:34 PM
just recieved my three risers. going to be installing them to a 290 and (2) 290x with 1200w corsair asrock extreme4 970 mobo, 12 gb ram......
anything special i need to do before installing to avoid frying anything? also, is insalling just as simple as plugging everything in?
thanks
anything special i need to do before installing to avoid frying anything? also, is insalling just as simple as plugging everything in?
thanks
February 20, 2014, 01:56:08 PM
How would we know when our order is shipped? Do you update the tracking on PayPal?
Most orders will show tracking through paypal if they paid with paypal. You will also get a notice from my website directly when I change the order to shipped.
Thanks!
February 20, 2014, 01:15:05 PM
How would we know when our order is shipped? Do you update the tracking on PayPal?
February 20, 2014, 09:46:42 AM
I'm wondering how everyone here runs multiple of these?
I have a cable that goes to my PSU from my SSD that has 3-4 attachment sites for SATA... Can I attached 3 risers to one of these cables and then attach that single cable to my PSU? will it be fine drawing 3x75w though it? I'm having a tough time getting an actual clear answer and I just had to post this here
I have a cable that goes to my PSU from my SSD that has 3-4 attachment sites for SATA... Can I attached 3 risers to one of these cables and then attach that single cable to my PSU? will it be fine drawing 3x75w though it? I'm having a tough time getting an actual clear answer and I just had to post this here
I can confirm the same results as RickJames, you will have no problem attaching to 3 gpus on the same sata component cable. The risers work great.
February 20, 2014, 02:55:17 AM
I'm wondering how everyone here runs multiple of these?
I have a cable that goes to my PSU from my SSD that has 3-4 attachment sites for SATA... Can I attached 3 risers to one of these cables and then attach that single cable to my PSU? will it be fine drawing 3x75w though it? I'm having a tough time getting an actual clear answer and I just had to post this here
I have a cable that goes to my PSU from my SSD that has 3-4 attachment sites for SATA... Can I attached 3 risers to one of these cables and then attach that single cable to my PSU? will it be fine drawing 3x75w though it? I'm having a tough time getting an actual clear answer and I just had to post this here
You asked me multiple times by pm, which I answered. Your cards most likely do not draw 75 watts through that connection, none that I have tested have gone more than 40-45. Either way, lets assume each card draws 50 watts from the 12v line. That's 150 - 200 watts per power cable, which is 12-17 Amps. Well within the range of acceptable current for a single 18 gauge wire up to 5 feet.
February 19, 2014, 09:36:11 PM
I'm wondering how everyone here runs multiple of these?
I have a cable that goes to my PSU from my SSD that has 3-4 attachment sites for SATA... Can I attached 3 risers to one of these cables and then attach that single cable to my PSU? will it be fine drawing 3x75w though it? I'm having a tough time getting an actual clear answer and I just had to post this here
I have a cable that goes to my PSU from my SSD that has 3-4 attachment sites for SATA... Can I attached 3 risers to one of these cables and then attach that single cable to my PSU? will it be fine drawing 3x75w though it? I'm having a tough time getting an actual clear answer and I just had to post this here
February 19, 2014, 08:27:05 PM
I say lower the price. Free shipping only helps those in the US correct?
Phad.
Phad.
Yep. K, lower price next week when I've caught up on all the sizes.
February 19, 2014, 08:11:55 PM
I say lower the price. Free shipping only helps those in the US correct?
Phad.
Phad.
February 19, 2014, 05:27:16 PM
If you are ok with waiting, I can start doing free first class mail shipping. Or I can just lower the price more. What would people like?
February 19, 2014, 03:55:41 AM
More and more, hundreds of orders shipped today, hundreds more tomorrow ( I filled up the USPS truck on my daily pickup, and had to take a carload to the post office myself!!). ALL orders for 30 and 60 cm (12" and 24") will be shipped by tomorrow, people ordered thousands of the 1m version over the holiday break and I'm still working to catch up, I'll have the last of orders for those placed before now shipped by either friday or monday.
I'm also going to have 12" (30cm) ribbon cable powered risers in soon, cheaper than anyone else.
Thanks!
I'm also going to have 12" (30cm) ribbon cable powered risers in soon, cheaper than anyone else.
Thanks!
February 18, 2014, 04:51:54 PM
Shipping on new orders STARTS on the 20th, although some may go out before that. Shorter cables will ship faster, I'm a little behind on the 1m size and getting more every day.
February 18, 2014, 02:33:38 PM
If you ordered, you should be able to check your order status. If should say the expected ship date is Feb 20th, 2014.
February 18, 2014, 02:33:26 PM
PLaced an order with BTC. So far seems to be smooth sailing.
Phad.
When is estimated shipping date for the 24" model ordered today?
Phad.
When is estimated shipping date for the 24" model ordered today?
February 18, 2014, 02:07:57 PM
curious if orders that were placed on the website on the 14th are still going to ship on the 20th?
February 18, 2014, 02:04:38 PM
This guy is awesome! I just bought 4 risers from him with BTC and it went right through. It was my first time buying with BTC so I sent an email to the address that was listed for any questions or concerns just to confirm that he received it. He responded immediately and said that he received the order. Just wanted to give a shout out to him and that I will definitely be a repeat customer when I further expand my setup!
Just wanted to post this to give anyone peace of mind in case they may have been hesitant on buying from him!
Just wanted to post this to give anyone peace of mind in case they may have been hesitant on buying from him!
February 18, 2014, 02:04:24 PM
Hey man, I placed an order on your website for two cables somewheres last week, would they be shipping out this week?
Jump to: