Topic: [WTS] USB Style PCI-E 1x - 16x Powered Riser Cables !! $5.95 ea 25k + Sold! - page 7. (Read 48138 times)
February 14, 2014, 05:03:55 PM
thanks!
February 14, 2014, 03:08:19 PM
The first big batch of orders will ship out TUESDAY. When I first said monday I didn't realize it was a holiday. Holidays really disrupt people that have lots of work to do! Then I will be shipping daily, should be current in 2-3 days with my orders arriving daily again.
February 14, 2014, 02:24:14 PM
hi wondering if any of the 1m preorders have shipped yet? thanks
February 14, 2014, 10:46:16 AM
I have huge amounts coming in next week. It will just be an issue of how many packages I can actually pack and ship each day. Taruntj, there is nothing USB related on these cards, it just uses the cable. You have a driver issue. Try Linux!
How would one solve these problems on windows? February 14, 2014, 01:20:14 AM
I have huge amounts coming in next week. It will just be an issue of how many packages I can actually pack and ship each day. Taruntj, there is nothing USB related on these cards, it just uses the cable. You have a driver issue. Try Linux!
Linux is so hard to use, can anyone help me set it up??These instructions will get you far.
http://rumorscity.com/2013/12/08/headless-linux-litecoin-miner-setup/
February 14, 2014, 01:15:38 AM
I have huge amounts coming in next week. It will just be an issue of how many packages I can actually pack and ship each day. Taruntj, there is nothing USB related on these cards, it just uses the cable. You have a driver issue. Try Linux!
Linux is so hard to use, can anyone help me set it up?? February 13, 2014, 01:41:46 PM
I have huge amounts coming in next week. It will just be an issue of how many packages I can actually pack and ship each day. Taruntj, there is nothing USB related on these cards, it just uses the cable. You have a driver issue. Try Linux!
February 13, 2014, 12:55:02 PM
I'll post it the day I get them in stock. I don't want people getting mad or going to the site and not seeing the product in my list, and assume that something is wrong. Once I get these in stock, they will always be in stock. I'll have other style cables and power supply products soon as well.
I cant get them to work, the card doesnt show up in Afterburner or cgminer, just "Usb Controller" in device manager under other Devices 
February 13, 2014, 07:19:09 AM
Hello again. How many are you going to have in stock on the 20th? Not sure yet, but I might need 10-20 or more of them, shipped to Sweden. Would it be possible to have that many to be shipped in one order? Also, any rebate for a larger amount?
February 13, 2014, 12:46:34 AM
I know what you are talking about. It also just replaces the molex plug on the adapter cable with a floppy drive power plug. All the ones I sell terminate in SATA as well. I don't like that style because it puts the cables on opposite sides of the board, which will eventually pull them away from each other if they aren't bound well. I'll see if I can get the 1x boards that point that way, but it is unlikely. Unfortunately the pci card slots just aren't designed to hold something in place. A drop of hot glue will make sure they never move yet can be removed if needed.
February 13, 2014, 12:39:10 AM
I actually would like to buy the narrow ones, with the PCI-E plug that goes parallel to the motherboard rather than up. I have an application where I mount the MB vertically.
Does anyone know where I can get some of these? 50 qty?
Does anyone know where I can get some of these? 50 qty?
I'll ask about them, they go the wrong way and I don't see them often. Having the cables head out the back side of the card was making it difficult for the little cards to stay in the slots because of the weight of the cables.
I would like risers exactly like this: https://ip.bitcointalk.org/?u=http%3A%2F%2Fi.ebayimg.com%2Ft%2FPCI-e-express-1X-to-1X-16x-Riser-Extender-Card-with-extra-power-1M-USB-3-0-Cable-%2F00%2Fs%2FNDQxWDYwMA%3D%3D%2Fz%2FDwMAAMXQdGJRzwCz%2F%24T2eC16JHJHEFFl1d5l%2CJBRzwCzSVzw~~60_3.JPG&t=537&c=bbGDOUda9yPqYg
Narrow PCB that mounts to card (for better airflow)
Sata power connectors under the USB )keeps it narrow plus I get to BANISH crappy molex connectors from my life!!! :-) )
Horizontal orientation on the USB cable at the 1X PCI-E plug
60cm USB Cable
When you mount the motherboard vertically (like on a wall) it is easier to secure the USB cable when it runs parallel to the MB (whether it be up or down) rather than poke straight out from the wall. I can see where a straight out (90° from the MB) might be preferred when the MB is laid flat. Although none of the 1X plugs have been very tight, meaning that that move with any movement of the USB cable. I shorted out one of yours Rick this way, with only a small USB cable movement. It was enough for the pins to cross and ZAP! Didn't ruin the MB but was out a riser plug. Melted the traces.
February 12, 2014, 11:45:04 PM
I actually would like to buy the narrow ones, with the PCI-E plug that goes parallel to the motherboard rather than up. I have an application where I mount the MB vertically.
Does anyone know where I can get some of these? 50 qty?
Does anyone know where I can get some of these? 50 qty?
I'll ask about them, they go the wrong way and I don't see them often. Having the cables head out the back side of the card was making it difficult for the little cards to stay in the slots because of the weight of the cables.
February 12, 2014, 11:10:09 PM
I actually would like to buy the narrow ones, with the PCI-E plug that goes parallel to the motherboard rather than up. I have an application where I mount the MB vertically.
Does anyone know where I can get some of these? 50 qty?
Does anyone know where I can get some of these? 50 qty?
February 12, 2014, 06:21:56 PM
Did the PCB on the amazon ones change? If I order through the site will it still be the wider blue colored PCB with the 4 screw holes on them? Curious because I changed my design so that I could screw the PCB boards onto a frame. Let me know, thanks!
You really shouldn't be screwing the riser cards to a frame. I don't think they can support the weight of a gpu hanging off of them. You should support the gpu, and just let the riser cards hang from them.
The design hasn't changed, almost all of the cards I've been selling have been the wider ones, with the molex connector. Amazon doesn't let me control images on some items at this time. The color of the pcb can vary though, I get what I get. They will all work the same.
Thanks!
Oh definitely. It's only to prevent the back side of the card from moving anywhere, the pcb isn't holding the hole card by itself, like this:
http://i.ebayimg.com/00/s/MTE0OVgxNjAw/z/N2kAAOxy4dNS8Efn/$_57.JPG http://i.ebayimg.com/00/s/MTYwMFgxMDg4/z/~hcAAOxyVaBS8Efm/$_57.JPG
http://i.ebayimg.com/00/s/MTYwMFgxMDg1/z/ofMAAMXQVT9S8Efn/$_57.JPG
February 12, 2014, 06:17:52 PM
Ok, there is now a "Shop With Bitcoin" menu option, which opens up a completely different shopping cart with perfect Bitcoin processing through Coinbase. It's slick, it works, and the shopping cart looks terrible because I haven't really had a chance to mess with themes and appearances yet. However, it has shipping logic for every international destination!!! Finally, no more orders through PM and email. Please make sure to include correct details in your account, otherwise your customs invoice won't be correct, and there may be delays.
February 12, 2014, 05:31:59 PM
Did the PCB on the amazon ones change? If I order through the site will it still be the wider blue colored PCB with the 4 screw holes on them? Curious because I changed my design so that I could screw the PCB boards onto a frame. Let me know, thanks!
You really shouldn't be screwing the riser cards to a frame. I don't think they can support the weight of a gpu hanging off of them. You should support the gpu, and just let the riser cards hang from them.
The design hasn't changed, almost all of the cards I've been selling have been the wider ones, with the molex connector. Amazon doesn't let me control images on some items at this time. The color of the pcb can vary though, I get what I get. They will all work the same.
Thanks!
February 12, 2014, 05:20:19 PM
Did the PCB on the amazon ones change? If I order through the site will it still be the wider blue colored PCB with the 4 screw holes on them? Curious because I changed my design so that I could screw the PCB boards onto a frame. Let me know, thanks!
February 11, 2014, 11:15:27 PM
Sweet!!! Cheers.
February 11, 2014, 11:12:16 PM
Can we still order directly from you? Amazon does not ship to Canada.
Yes, and in a few minutes / hours I'll have my brand new Bitcoin only shopping cart up and running as a subsite for the main shopping cart. This will let international orders make normal accounts and place orders without having to do it via PM.
February 11, 2014, 10:57:36 PM
Can we still order directly from you? Amazon does not ship to Canada.
Jump to: