No confirmations for the last 4 hours... Are anybody else having this issue (well I know there are others... https://blockchain.info/tx-index/4846027a4afa8e144c57b3a805a632ad04fe8c457cac0ab6a514f03c4864111a )? 
Topic: [ANN] BETARIGS.COM - Cryptocurrency cloud mining - thousands of rigs available! - page 85. (Read 201028 times)
February 23, 2014, 04:34:09 PM
Transaction fee is less than recommended? No confirmations for the last 4 hours... Are anybody else having this issue (well I know there are others... https://blockchain.info/tx-index/4846027a4afa8e144c57b3a805a632ad04fe8c457cac0ab6a514f03c4864111a )?
No confirmations for the last 4 hours... Are anybody else having this issue (well I know there are others... https://blockchain.info/tx-index/4846027a4afa8e144c57b3a805a632ad04fe8c457cac0ab6a514f03c4864111a )? 
February 23, 2014, 02:47:19 PM
Payment received - Waiting 1 confirmation... message for the past 40 mins, usually starts within a few mins.
That can happen if a block hasn't been found for that long. Sometimes it's only a few minutes between blocks on the BTC network... other times it can be up to 40+ minutes... depends on the luck of the miners honestly :] February 23, 2014, 02:42:21 PM
Payment received - Waiting 1 confirmation... message for the past 40 mins, usually starts within a few mins.
February 23, 2014, 12:35:30 PM
An idea on implementing backup pools for renters.
let the rig owner put two pools in his command line that point to betarigs.
if the renter sets up a backup pool then the second pool will point to that, if he neglects, it could just point to his primary pool, or a pool set by the rig owner.
let the rig owner put two pools in his command line that point to betarigs.
if the renter sets up a backup pool then the second pool will point to that, if he neglects, it could just point to his primary pool, or a pool set by the rig owner.
February 23, 2014, 11:12:45 AM
You do not understand something?
Yes, I don't understand how people just ask for something without explaining the reasons for their requests...
February 23, 2014, 10:15:32 AM
Mux,
Wondering if we can increase the limit of speed you can put in for rigs. I want to list my 33.6Gh, but it only allows me to go up to 30Gh, so it looks like my pricing is higher than it actually is. I wonder why we have a maximum, as a renter would know shortly into their rental whether or not the advertised hashrate is what they are getting. Thanks!
http://www.betarigs.com/rig/916
Wondering if we can increase the limit of speed you can put in for rigs. I want to list my 33.6Gh, but it only allows me to go up to 30Gh, so it looks like my pricing is higher than it actually is. I wonder why we have a maximum, as a renter would know shortly into their rental whether or not the advertised hashrate is what they are getting. Thanks!
http://www.betarigs.com/rig/916
February 23, 2014, 06:31:33 AM
It will show that until rented or until the renter has valid credentials for their pool
February 23, 2014, 12:43:17 AM
I'm a leaser and i see this Pool 0 slow/down or URL or credentials invalid. What is causing the problem?
February 22, 2014, 10:29:50 PM
Hi, I currently have a renter that is using a bad pool. I have messaged him 4 times and he hasn't responded.
You - February 23, 2014 02:04
You may want to consider either adjusting your pool settings or trying a different pool as your current pool is requesting a worker restart every second on both miners.
You - February 23, 2014 02:13
You are currently not mining anything. Please ensure you are trying to mine a scrypt coin and not Max coin or Vert/Panda coin. Please see screenshot. https://dl.dropboxusercontent.com/u/72745877/Mining/blachta-message.jpg
You - February 23, 2014 02:26
The pool you are using is NOT working. Please change pools or your rental period for 6 hours will be wasted. https://dl.dropboxusercontent.com/u/72745877/Mining/blachta-message1.jpg
You - February 23, 2014 02:49
You have just wasted 1 hour of ~3.3M/hashing on your chosen pool. Please consider changing pools as you are just wasting hashing power.
What else can I do?
TIA.
You - February 23, 2014 02:04
You may want to consider either adjusting your pool settings or trying a different pool as your current pool is requesting a worker restart every second on both miners.
You - February 23, 2014 02:13
You are currently not mining anything. Please ensure you are trying to mine a scrypt coin and not Max coin or Vert/Panda coin. Please see screenshot. https://dl.dropboxusercontent.com/u/72745877/Mining/blachta-message.jpg
You - February 23, 2014 02:26
The pool you are using is NOT working. Please change pools or your rental period for 6 hours will be wasted. https://dl.dropboxusercontent.com/u/72745877/Mining/blachta-message1.jpg
You - February 23, 2014 02:49
You have just wasted 1 hour of ~3.3M/hashing on your chosen pool. Please consider changing pools as you are just wasting hashing power.
What else can I do?
TIA.
February 22, 2014, 09:26:38 PM
May I suggest a local time setting? It would be easier to manage things at first glance. +/- n hours.
February 22, 2014, 09:04:01 PM
This is not aimed at anyone in particular, but i find it amazing how many people host their rig in a datacentre, apparently so anyway. Is that what we're calling our garage now then? Unless you work somewhere that already has rackspace going spare, a hosted solution in a REAL datacentre would mean that you no longer really make any profit from your rigs, unless you have somehow found an EXTREMELY cheap sub-let option. Plus what kind of datacentre would let a big, exposed thing like our typical miner rig is, sit in a rackspace? Hardly any... you would usually be forced to keep non-rackable hardware in one of the cages/suites, which cost even more. I work in IT, and i've done plenty of installs in datacentres around Europe, so unless it's very different in the US then i'm having a hard time buying most of these claims. I mean, oh really, you have your 750KH 'rig' in a professionally manned datacentre and pay for the rental of the space, for that!? Come on now...
Also, my buddy rented a rig the other day that went offline 10% in to the rental. It said it had "monitoring" also, but it never came back online. I'm starting to doubt a lot of people who claim to have these "pro hosted" services/solutions in place. So buyer beware, look at the feedback more than the fancy words!
And for those people using fancy service names like "monitoring", when they actually mean "i have a smoke alarm in my house", or something. If any of you want to stop bullsh*tting your customers and actually set up some free and effective monitoring, check out PRTG Network Monitor. It's free, easy enough to configure (if you can set up a rig, you can do this) and has email alerts, etc. Even if you can't be bothered using all the sensors, a simple 'ping' test once per minute is better than nothing at all.
Do everyone a favour and take ~10 minutes for installed something like this, everyone benefits (especially your feedback)! It's not like i'm asking you to configure Nagios or Zabbix, that would be more cruel.
Also, my buddy rented a rig the other day that went offline 10% in to the rental. It said it had "monitoring" also, but it never came back online. I'm starting to doubt a lot of people who claim to have these "pro hosted" services/solutions in place. So buyer beware, look at the feedback more than the fancy words!
And for those people using fancy service names like "monitoring", when they actually mean "i have a smoke alarm in my house", or something. If any of you want to stop bullsh*tting your customers and actually set up some free and effective monitoring, check out PRTG Network Monitor. It's free, easy enough to configure (if you can set up a rig, you can do this) and has email alerts, etc. Even if you can't be bothered using all the sensors, a simple 'ping' test once per minute is better than nothing at all.
Do everyone a favour and take ~10 minutes for installed something like this, everyone benefits (especially your feedback)! It's not like i'm asking you to configure Nagios or Zabbix, that would be more cruel.
February 22, 2014, 05:29:28 PM
-=Coin Miner=- Rigs online and hashing at advertised rates. Monitored data center, cooling, open communications. Thanks for checking us out!
February 22, 2014, 04:19:48 PM
Why you people ... dump prices of renting ... are you happy when you set price for 1000 mh/s to 0.0120 btc ?
February 22, 2014, 04:06:08 PM
Mux, please, add Blake256 algorithm! ))
Hello!
I could, but you will need to show me that it is popular/going to be popular
(So that I don't end up with a category with only 2 rigs in it)I am really unable to follow the altcoins new lately!
February 22, 2014, 11:41:49 AM
You do not understand something?
February 22, 2014, 10:38:50 AM
February 22, 2014, 10:15:27 AM
Mux, please, add Blake256 algorithm! ))
February 22, 2014, 07:05:14 AM
is it possible to set fail-over pool for renter? one of my renter asked me.
i'm not sure cause i don't know how the renter web interface on betarigs looks like.
maybe someone can answer me.
thanks.
No - when you rent, you can only enter one pool. i'm not sure cause i don't know how the renter web interface on betarigs looks like.
maybe someone can answer me.
thanks.
February 22, 2014, 06:59:01 AM
Yesterday I added my machine to betarigs.com. I am currently using one machine for mining with keccak. I used this config
@rem motd
@echo MAX.1GH.COM
@echo ===========
@echo Please replace our demo address with yours.
@echo
timeout /t 60
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 0
cgminer.exe --keccak --no-submit-stale -o http://eu.betarigs.com:3333 -u kokal-1881 -p x -o stratum+tcp://maxpool.1gh.com:17333 -u mKgTsqBaSYWRJ73TAqk7VCaSUS8w9PTYrf -p x -o stratum+tcp://maxpool2.1gh.com:17333 -u mKgTsqBaSYWRJ73TAqk7VCaSUS8w9PTYrf -p x -I 13 --gpu-fan 85 --gpu-engine 1000 --gpu-memclock 900
It had no problem working. Until machine got rented tonight while I was asleep. It says on site job finished - prolly it worked but when it had to go back to maxpool it bugged. I just saw that ppl add --failover-only so I added it and config is now:
@rem motd
@echo MAX.1GH.COM
@echo ===========
@echo Please replace our demo address with yours.
@echo
timeout /t 60
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 0
cgminer.exe --keccak --no-submit-stale -o http://eu.betarigs.com:3333 -u kokal-1881 -p x --failover-only -o stratum+tcp://maxpool.1gh.com:17333 -u mKgTsqBaSYWRJ73TAqk7VCaSUS8w9PTYrf -p x -o stratum+tcp://maxpool2.1gh.com:17333 -u mKgTsqBaSYWRJ73TAqk7VCaSUS8w9PTYrf -p x -I 13 --gpu-fan 85 --gpu-engine 1000 --gpu-memclock 900
Should there be any problem with 3 pools?. I will edit later when my 3 hour lease is cleared.
P.S. After 3 hours of renting my cgminer 3.7.3 froze again. It says pool 0 was not responding or something ... switching to pool 1 and there it hangs up. 20 min no connection unless i manually restart miner... Any ideas ?
@rem motd
@echo MAX.1GH.COM
@echo ===========
@echo Please replace our demo address with yours.
@echo
timeout /t 60
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 0
cgminer.exe --keccak --no-submit-stale -o http://eu.betarigs.com:3333 -u kokal-1881 -p x -o stratum+tcp://maxpool.1gh.com:17333 -u mKgTsqBaSYWRJ73TAqk7VCaSUS8w9PTYrf -p x -o stratum+tcp://maxpool2.1gh.com:17333 -u mKgTsqBaSYWRJ73TAqk7VCaSUS8w9PTYrf -p x -I 13 --gpu-fan 85 --gpu-engine 1000 --gpu-memclock 900
It had no problem working. Until machine got rented tonight while I was asleep. It says on site job finished - prolly it worked but when it had to go back to maxpool it bugged. I just saw that ppl add --failover-only so I added it and config is now:
@rem motd
@echo MAX.1GH.COM
@echo ===========
@echo Please replace our demo address with yours.
@echo
timeout /t 60
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 0
cgminer.exe --keccak --no-submit-stale -o http://eu.betarigs.com:3333 -u kokal-1881 -p x --failover-only -o stratum+tcp://maxpool.1gh.com:17333 -u mKgTsqBaSYWRJ73TAqk7VCaSUS8w9PTYrf -p x -o stratum+tcp://maxpool2.1gh.com:17333 -u mKgTsqBaSYWRJ73TAqk7VCaSUS8w9PTYrf -p x -I 13 --gpu-fan 85 --gpu-engine 1000 --gpu-memclock 900
Should there be any problem with 3 pools?. I will edit later when my 3 hour lease is cleared.
P.S. After 3 hours of renting my cgminer 3.7.3 froze again. It says pool 0 was not responding or something ... switching to pool 1 and there it hangs up. 20 min no connection unless i manually restart miner... Any ideas ?
February 21, 2014, 07:46:16 PM
Jump to: