[ANN] ETHASH Miner - Eminer v0.6.1-RC2 Released (Windows, Linux, MacOS) - page 7.

E-Miner

newbie

Activity: 58

Merit: 0

Quote from: papasmurf1337 on September 14, 2017, 08:06:07 PM

Can you tell us what update will contain?

I am interested in this miner but do it little better for NVIDIA cards, specially for dual mining

Here the some subjects;

- Cloud monitor feature; miner can view and monitor all rigs on a website with statistics and alarms feature and this will be free service forever, if miner pay devfee.
- Reported bugs fixed
- Linux hashrate improved
- DAG intensity feature added
- Devfee coins selectable now.
- Intensity improved.

terrxysq

newbie

Activity: 27

Merit: 0

i think the AMD card code is pretty good after running for a few days. The displayed hashrate is slightly lower than claymore. But the average 24hr rate reported by the pools seems to be slightly more. When using claymore most of the time the average rate is only around 92-95% of the reported rate. When using eminer the average rate are mostly around 95-98% of the reported rate, and occasionally go over the reported rate for a while.

I think the N card code might need some improvement. At least it is not working properly for me.

papasmurf1337

newbie

Activity: 64

Merit: 0

Can you tell us what update will contain?

I am interested in this miner but do it little better for NVIDIA cards, specially for dual mining

E-Miner

newbie

Activity: 58

Merit: 0

Quote from: terrxysq on September 13, 2017, 10:55:50 AM

any updates to this?

it worked quite well for my amd cards but when it comes to nvidia cards it gets some invalid command error after a few min of mining.
also the speed is slightly less than claymore. 30.3 vs 31

not that really to compare the shares between eminer vs claymores but the effective hash rate from the pool seems to show higher rates for eminer. so a thumbs up for this.

I will announce new release in a few days. Thanks for your report.

terrxysq

newbie

Activity: 27

Merit: 0

any updates to this?

it worked quite well for my amd cards but when it comes to nvidia cards it gets some invalid command error after a few min of mining.
also the speed is slightly less than claymore. 30.3 vs 31

not that really to compare the shares between eminer vs claymores but the effective hash rate from the pool seems to show higher rates for eminer. so a thumbs up for this.

oli123

full member

Activity: 644

Merit: 100

I found a link to eminer at http://cryptomining-blog.com/. So I decided to try it out. First I tried the command: eminer -B 0. I tested and the result was 27 Mh/s. So I tried eminer to Pegascoin mining.
eminer -S eu.coin-miners.info:2222 -U wallet -P miner name
4xRX 480 8gb 1077/2200 core/mem no moded bios.
Nice graphic design and useful information during mining. I like Eminer and I will use it for ethash mining.

Here's the screen:

kuduirt

member

Activity: 304

Merit: 10

shit miner ) same like clamor )nothng interisting
Tongue

imho

aar

member

Activity: 67

Merit: 16

interesting, certainly would be nice to have more competition in the mining software space.

christianCoder

newbie

Activity: 13

Merit: 0

Quote from: smparo on September 09, 2017, 10:17:40 AM

I'm just talking about windows eminer
I notice that some times eminer write devfee on the log but I did not understand how often this is done (I seem to remember after a few hours that I had started it). You can search on your eminer console with CTRL+F.
Also for the profitability there is a problem: every day there are increase of difficulty!
https://www.coinwarz.com/difficulty-charts/ethereum-difficulty-chart

For me anyway the share is much more constant and with Claymore my average hashrate over the last 24 hours on ethermine was 57.4 and now with eminer is 59.2MH/s (2 x RX580)... your average is less than before?

Thanks for the reply and for checking.

Getting 5 to 6 MH/s more than Claymore can also do core underclocks and memory overclocks more agressively on Eminer. ~~However, not as stable as Claymore on Linux. Longest run w/o crashing was maybe 7 to 10 hours.~~ Redacting the stability issue. Looks like it'll be running for 24hrs non-stop in a few hours -- all with aggressive core underclocks and undervolts. However, IMO, The Eminer dev fee is still a black box.

Also want to encourage the E-miner guy (an AMD Employee perhaps) to keep innovating. I know a lot of work went into this and you have my support. But transparency is crucial.

smparo

newbie

Activity: 27

Merit: 0

Quote from: christianCoder on September 09, 2017, 08:08:09 AM

How can we verify this is only taking out a 1% dev fee? And what is the frequency of the 1% cut vs Claymore?

Even with the slightly higher hashrates, in comparison to Claymore, looks like Eminer profitability is much lower per my Ethermine.org Payout/Rounds dashboard. Also looks like Ether balance accumulates slower on this vs Claymore.

Has anyone else here noticed this? Taking "1%" every 10 minutes is very different from taking 1% every hour.

Please verify and respond.

I'm just talking about windows eminer
I notice that some times eminer write devfee on the log but I did not understand how often this is done (I seem to remember after a few hours that I had started it). You can search on your eminer console with CTRL+F.
Also for the profitability there is a problem: every day there are increase of difficulty!
https://www.coinwarz.com/difficulty-charts/ethereum-difficulty-chart

For me anyway the share is much more constant and with Claymore my average hashrate over the last 24 hours on ethermine was 57.4 and now with eminer is 59.2MH/s (2 x RX580)... your average is less than before?

christianCoder

newbie

Activity: 13

Merit: 0

How can we verify this is only taking out a 1% dev fee? And what is the frequency of the 1% cut vs Claymore?

Even with the slightly higher hashrates, in comparison to Claymore, looks like Eminer profitability is much lower per my Ethermine.org Payout/Rounds dashboard. Also looks like Ether balance accumulates slower on this vs Claymore.

Has anyone else here noticed this? Taking "1%" every 10 minutes is very different from taking 1% every hour.

Please verify and respond.

kcopcu

newbie

Activity: 23

Merit: 0

Quote from: laik2 on September 08, 2017, 07:48:12 AM

Enhancements request:
1. Ability to change API port.
2. Ability to use failover stratum.
3. Ability to see incorrect gpu solutions like accepted/rejected/incorrect.
4. DevFee switch notice and ETC devfee mining without DAG switch.
Feature request:
Watchdog on GPU failure
Thats it for now.

I tried yesterday on my laptop . They've already changing port API and failover stratum usage .

HTTP Port change :
eminer.exe -http :80

Stratum failover :

eminer -S eu1.ethermine.org:4444,us1.ethermine.org:4444

laik2

sr. member

Activity: 652

Merit: 266

Enhancements request:
1. Ability to change API port.
2. Ability to use failover stratum.
3. Ability to see incorrect gpu solutions like accepted/rejected/incorrect.
4. DevFee switch notice and ETC devfee mining without DAG switch.
Feature request:
Watchdog on GPU failure
Thats it for now.

OverEasy

sr. member

Activity: 301

Merit: 251

So whats the trick to use this with AMD?
Tried -kernel 0
-kernel amd
-kernel AMD

Maybe some better instructions?
Is it even AMD capable?

Thanks

laik2

sr. member

Activity: 652

Merit: 266

Quote from: Mind163 on September 08, 2017, 05:12:56 AM

Quote from: laik2 on September 07, 2017, 02:24:59 PM

Quote from: Mind163 on September 07, 2017, 02:10:49 PM

Quote from: laik2 on September 07, 2017, 01:10:13 PM

Quote from: Mind163 on September 07, 2017, 01:02:39 PM

I liked the program. Result with my personal timings: link. I make timings under the order. If anyone is interested, here's the link.
1250/2300 = 32.61+

Using nerdralph's strapmod is not "making" timings. I saw your timings, nothing special about those.

I use only my own modifications. Probably, someone has spied on them from me. My topic is quite old.

https://bitcointalksearch.org/topic/custom-ram-timings-for-gpus-with-gddr5-download-links-updated-1758267

Yeah, probably someone "stole" your work

EDIT: I just saw your Hynix timings. No offense but...man do you even know what you are doing. The trial and error part is supposed to be private and right after you have learned what is what you can *try* to sell?
999000000000000022C39C00AC595A3D90550F123CCF530C004006007E0514206A8900A00200312 0100F292F94273116 -> for example this one is complete mess, I have no idea how gpus modded with this strap even post.
EDIT2: Oh and by the way look at GPU2 add +0.4MH cuz its run on Linux ~33.4MH on windows @ ~130W ATW => http://imgur.com/a/6OrjW

On this set of timings my card did not work at all at 2200+. I think it's all clear on this. (Sapphire 580 8 GB Hynix).

You continue to amuze me, this isn't H5GC8H24MJ, the timing I quoted is from your own thread and its for MSI RX570 4G H5GC4H2AJ, suppose it has nothing to do with original and the mess is actually mixing a lot of shit.

Mind163

newbie

Activity: 79

Merit: 0

Quote from: laik2 on September 07, 2017, 02:24:59 PM

Quote from: Mind163 on September 07, 2017, 02:10:49 PM

Quote from: laik2 on September 07, 2017, 01:10:13 PM

Quote from: Mind163 on September 07, 2017, 01:02:39 PM

I liked the program. Result with my personal timings: link. I make timings under the order. If anyone is interested, here's the link.
1250/2300 = 32.61+

Using nerdralph's strapmod is not "making" timings. I saw your timings, nothing special about those.

I use only my own modifications. Probably, someone has spied on them from me. My topic is quite old.

https://bitcointalksearch.org/topic/custom-ram-timings-for-gpus-with-gddr5-download-links-updated-1758267

Yeah, probably someone "stole" your work

EDIT: I just saw your Hynix timings. No offense but...man do you even know what you are doing. The trial and error part is supposed to be private and right after you have learned what is what you can *try* to sell?
999000000000000022C39C00AC595A3D90550F123CCF530C004006007E0514206A8900A00200312 0100F292F94273116 -> for example this one is complete mess, I have no idea how gpus modded with this strap even post.
EDIT2: Oh and by the way look at GPU2 add +0.4MH cuz its run on Linux ~33.4MH on windows @ ~130W ATW => http://imgur.com/a/6OrjW

On this set of timings my card did not work at all at 2200+. I think it's all clear on this. (Sapphire 580 8 GB Hynix).

bitcoyim

member

Activity: 65

Merit: 10

Quote from: crpt01 on September 08, 2017, 04:31:31 AM

Quote from: bitcoyim on September 08, 2017, 04:26:46 AM

Quote from: crpt01 on September 08, 2017, 04:09:38 AM

Wich driver version is the best choice for 6 rx480 nitro OC (11260-01-20G) on win10 to use with eminer ?

tnks
crpt01

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Use this dag fixed driver

tnks, I'll try them right away

Dont forget to clean older drivers with DDU https://www.wagnardsoft.com/

crpt01

full member

Activity: 174

Merit: 105

Quote from: bitcoyim on September 08, 2017, 04:26:46 AM

Quote from: crpt01 on September 08, 2017, 04:09:38 AM

Wich driver version is the best choice for 6 rx480 nitro OC (11260-01-20G) on win10 to use with eminer ?

tnks
crpt01

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Use this dag fixed driver

tnks, I'll try them right away

bitcoyim

member

Activity: 65

Merit: 10

Quote from: crpt01 on September 08, 2017, 04:09:38 AM

Wich driver version is the best choice for 6 rx480 nitro OC (11260-01-20G) on win10 to use with eminer ?

tnks
crpt01

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

Use this dag fixed driver

crpt01

full member

Activity: 174

Merit: 105

Wich driver version is the best choice for 6 rx480 nitro OC (11260-01-20G) on win10 to use with eminer ?

tnks
crpt01

Topic: [ANN] ETHASH Miner - Eminer v0.6.1-RC2 Released (Windows, Linux, MacOS) - page 7. (Read 24702 times)