Topic: [ANN] ETHASH Miner - Eminer v0.6.1-RC2 Released (Windows, Linux, MacOS) - page 9. (Read 24702 times)

At the end of the batch file put pause, it won't close.

just open command promt (cmd)

Go to your eminer folder, for example:

cd C:\user\test\desktop\eminer
eminer.exe -h -> type this

There is no manual, only the comand "eminer -h" for help
If you use ethermine you can use this command (for me intensity 30 is the best value and I have the fan set at 75%)

eminer.exe -S eu1.ethermine.org:4444 -U your_address -P x -intensity 30,30 -fan-percent 75,75

Same with musicoin would be good.

Thanks, I will change this next release.

Thanks, thats just for OpenCL, the miner doesnt change any order, I will try map the correct order via PCI Bus ids.

A small remark.
I am currently mining etc, not eth. Noticed that devfee switches to Eth and generates new DAG each time it switches to devfee, please consider using etc devfee also.

Maybe a bug: sometimes the software reverses video cards, I noticed this because I did some updates today and when I restart the system the fan speed settings are applied to the wrong cards... I solved applying to all the cards the same fan speed for now.

This is the output of the command "eminer -L" when the cards are reversed (note "Device ID for mining" and "PCI bus id")

+--------------------------------------------------+
|                  OPENCL DEVICES                  |
+--------------------------------------------------+

===================  PLATFORMS  ====================

Platform ID                 0
Platform Name               AMD Accelerated Parallel Processing
Platform Vendor             Advanced Micro Devices, Inc.
Platform Version            OpenCL 2.0 AMD-APP (2442.10)
Platform Extensions         cl_khr_icd cl_khr_d3d10_sharing cl_khr_d3d11_sharing cl_khr_dx9_media_sharing cl_amd_event_callback cl_amd_offline_devices
Platform Profile            FULL_PROFILE

   ===  DEVICE #0  ===
   Device ID for mining     0
   Device Name              Ellesmere
   Vendor                   Advanced Micro Devices, Inc.
   Version                  OpenCL 2.0 AMD-APP (2442.10)
   Driver version           2442.10
   Address bits             64
   Max clock freq           1150
   Global mem size          8589934592
   Max constant buffer size 4244635648
   Max mem alloc size       4244635648
   Max compute units        36
   Max work group size      256
   Max work item sizes      [256 256 256]
   PCI bus id               2

   ===  DEVICE #1  ===
   Device ID for mining     1
   Device Name              Ellesmere
   Vendor                   Advanced Micro Devices, Inc.
   Version                  OpenCL 2.0 AMD-APP (2442.10)
   Driver version           2442.10
   Address bits             64
   Max clock freq           1150
   Global mem size          8589934592
   Max constant buffer size 4244635648
   Max mem alloc size       4244635648
   Max compute units        36
   Max work group size      256
   Max work item sizes      [256 256 256]
   PCI bus id               1

====================================================

Do you have a list of commands that we can use ?
update: Disregard I found it.

You can't, I wrote that.

Hashrate drops with about 3% after setting intensity to 28.
From 30.04 to 29.5 roughly, power consumption doesn't change much...about 1W roughly.

Well it works fine for me, results even more than some other miner.

Where do i get Gpustat for amd?
i want to check on simplemining os

Thanks for your feedback. like intensity, I can advise 28 for RX580, can you set the intensity on parameters?

I noticed something else:

Eminer power consumption hashrate +0.3% 30.04MH vs 29.92MH(Claymore 10.0) hynix 8G memory RX580
http://imgur.com/a/O15hj
Claymore power consumption:
http://imgur.com/a/2gFB4
A few watts up. Its either due to higher intensity or kernel needs polishing

So far so good. I love it! :3 Your OpenCL kernel is AWESOME! I've same hashrate as with CUDA (+/- 1%) currently on 1 rig testing. But the biggest advantge for me is that voltages are stable, that was what I hate on NVIDIA cards... Now I can try undervolt more.
Web stats are also very nice, that's why I also like XMR-STAK.
I will report in few days how it's working. Thanks for your work.

Test result: the shares are similar to claymore with RX580. 
I like the monitor. 
Is there a hot key to change intensity when mining software runs for fine tunning? The test was run with intensity to 28 (have you any suggest for this value?)
And just another question: can you explain better all the options? For example: the log, default is 3 but what is the range? 1-3, 1-5, 1-10

Great work. Looking forward to using this once features are ironed out.

I would of course like to see more support for Nvidia cards. Not everyone mines with AMD.

Thank you also for your advices,  I added the feature todo list already, I would like to finish next release.

Linux yes, what other minerS?
The comparison can be done only with claymore
As I can see the hashrate is improved 0.5% which is very good considering there was no other alternative to claymore's miner.
Keep up the good work, competition is good for all of us simple miners
Now I must think of rewriting my claymore monitor script to suit your API, or ...if you provide any ETA for multirig monitoring feature would simplify my work.
Thanks.
EDIT: No I don't want to call watchdog on incorrect share, probably only on stuck thread, but the point is watchdog is probably the most important feature for 24/7 work without or with less human interference.