.Melb
Topic: [ANN] Technobit HEX16B(Bitfury based) 16 chip board design - page 17. (Read 56527 times)
The real problem is that the calculators can only make a guess at the potential increase in hashing power over the next few weeks and months.. This in turn also depends upon manufacturers sticking to claimed delivery times... Given that Terrahash+ units are not far away then the potential lifespan of < 100GH/S units has to be questioned - it may well be as mentioned that the most profitable option is to sell the equipment now whilst it still has value before these big guns hit the pools. But of course that is not much fun .
Melb
.Melb
I mean how much BTC are you guys getting a day? I was bought 2 of these machines and I am planning to overclock it to ge around 90GH/s from both ie. 45GH/s each. When I calculated, last month, I stand to gain 2.25 BTC a month, now based on the calculations, I stand to gain 1.14BTC a month... I mean I'm not sure if it is even worth it... If I did get this, I might well sell it on ebay to make a profit.
Please use a hash calculator like that http://btcinvest.net/en/bitcoin-mining-profit-calculator.php
Well... today is the last day of Dec...
Will my order (EVWMJYXQI 2013-11-20) be shipped today??
Will my order (EVWMJYXQI 2013-11-20) be shipped today??
Have you got 1 or 2 "pulse" component?? @ MArtin I've got 2 board it Work at 48 Gh, 52Gh it's a good job but All Bitfury chip is not in the same direction, and I have got 3,5% HW Error If I soldering All chip in same way I will have less HW Error? board will work better?
somebody Work at perfectionate Hex miner? a thread anywhere to get more information?
somebody Work at perfectionate Hex miner? a thread anywhere to get more information?
Your Hex16B sound like they won the silicon lottory. Mine has 2x WE744355122 power inductors and averages 41.5GH/s. @ 540/900mV
H/W error comes from how far you push the voltage. I've got 0.5% rejects. What is you mV set at?
Well... i'm not unlucky
Hex's set at 1,000V ( now at 0,950V and I have less HWError(2% for the same GH/s). Hex is powered by one of my blade backplane (long story.... surrounding 100W
I mean how much BTC are you guys getting a day? I was bought 2 of these machines and I am planning to overclock it to ge around 90GH/s from both ie. 45GH/s each. When I calculated, last month, I stand to gain 2.25 BTC a month, now based on the calculations, I stand to gain 1.14BTC a month... I mean I'm not sure if it is even worth it... If I did get this, I might well sell it on ebay to make a profit.
With one of my computer my firware Block Hexminer;
the reason : MSIL:BitCoinMiner-B [Trojan]
That is a false positive or your file is corupt
( downloaded on technobit website )
the reason : MSIL:BitCoinMiner-B [Trojan]
That is a false positive or your file is corupt
( downloaded on technobit website )Thats not a false positive! Many bot networks use CPU/GPU miners for mining btc with infected computers. Meantime the most virus scanner detect this kind of miner software. The current cgminer is without this sources and wouldn't detect.
Have you got 1 or 2 "pulse" component?? @ MArtin I've got 2 board it Work at 48 Gh, 52Gh it's a good job but All Bitfury chip is not in the same direction, and I have got 3,5% HW Error If I soldering All chip in same way I will have less HW Error? board will work better?
somebody Work at perfectionate Hex miner? a thread anywhere to get more information?
somebody Work at perfectionate Hex miner? a thread anywhere to get more information?
Your Hex16B sound like they won the silicon lottory. Mine has 2x WE744355122 power inductors and averages 41.5GH/s. @ 540/900mV
H/W error comes from how far you push the voltage. I've got 0.5% rejects. What is you mV set at?
@ Martin,
With one of my computer my firware Block Hexminer;
the reason : MSIL:BitCoinMiner-B [Trojan]
That is a false positive or your file is corupt ( downloaded on technobit website )
An over question to All miner with HeX
Have you got 1 or 2 "pulse" component?? @ MArtin I've got 2 board it Work at 48 Gh, 52Gh it's a good job but All Bitfury chip is not in the same direction, and I have got 3,5% HW Error If I soldering All chip in same way I will have less HW Error? board will work better?
somebody Work at perfectionate Hex miner? a thread anywhere to get more information?
With one of my computer my firware Block Hexminer;
the reason : MSIL:BitCoinMiner-B [Trojan]
That is a false positive or your file is corupt
( downloaded on technobit website )An over question to All miner with HeX
Have you got 1 or 2 "pulse" component?? @ MArtin I've got 2 board it Work at 48 Gh, 52Gh it's a good job but All Bitfury chip is not in the same direction, and I have got 3,5% HW Error If I soldering All chip in same way I will have less HW Error? board will work better?
somebody Work at perfectionate Hex miner? a thread anywhere to get more information?
hi Marto you say my orders are ready , please organize your transport
pls could payshipping charges to send it to me? the order reference: JSOFRXHZQ and TNYDUBSHI??
THX
pls could payshipping charges to send it to me? the order reference: JSOFRXHZQ and TNYDUBSHI??
THX
I contacted via site 12th of Dec for VAT deduction but never got reply 
As stated We are very busy with the production of current orders catching up, sorryMarto, can you please answer me - you always just reply 1 message when there are a few questions above these messages.
If your time frame is next week and it is too late for you we'll refund you.
It can be done with e-mail request from you or Paypal dispute, both work
I contacted via site 12th of Dec for VAT deduction but never got reply
As stated We are very busy with the production of current orders catching up, sorryMarto, can you please answer me - you always just reply 1 message when there are a few questions above these messages.
I contacted via site 12th of Dec for VAT deduction but never got reply
As stated We are very busy with the production of current orders catching up, sorry
I contacted via site 12th of Dec for VAT deduction but never got reply
Dear, firends,
We shipped out today most of early December Hex16a2 (c) and Hex16b orders.
Unfortunately we were not able to shipout all of the December orders yet.
We'll continue shipping on 30-th of December , but most probably there still be some late December orders that will be left for shipping in the 1-st week of January.
Hex16A ( avalon gen1) We did send out part of the last batch orders. There are some orders that will be out in the 1-st week of January too.
Nanofuries We send some orders today and due to some production delays , there are still orders that are late.
We are scheduling production in the first days of January
All customers with faulty units Just return them to sending addres and We'll send you replacement/repaired unit .
All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en
Wishing you Happy new year.
Technobit team
We shipped out today most of early December Hex16a2 (c) and Hex16b orders.
Unfortunately we were not able to shipout all of the December orders yet.
We'll continue shipping on 30-th of December , but most probably there still be some late December orders that will be left for shipping in the 1-st week of January.
Hex16A ( avalon gen1) We did send out part of the last batch orders. There are some orders that will be out in the 1-st week of January too.
Nanofuries We send some orders today and due to some production delays , there are still orders that are late.
We are scheduling production in the first days of January
All customers with faulty units Just return them to sending addres and We'll send you replacement/repaired unit .
All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en
Wishing you Happy new year.
Technobit team
Hi marto, if I do not get my ASIC shipped by next week, I want to cancel my order. How do I go about doing it? Are you going to issue a refund or do I need to open a file on paypal ?
Just to make it clear
We started accepting December delivery orders from 15-th of November and quantity was sold out around 12-th of December.
So order placed on 1-st of December is not early December shipment order
We started accepting December delivery orders from 15-th of November and quantity was sold out around 12-th of December.
So order placed on 1-st of December is not early December shipment order
I'm guessing order EVAEOQNVV 2013-11-22 is an 'early' shipment ?
I hope delivery my orders as soon as possible.
OUGOKIORQ 2013-11-23 73,20€ (1x Router + 2x USBs)
YLAXKWNEM 2013-11-23 952,00€ (2x 40 GH/s Full set Technobit HEX16B)
Waiting for your news marto74, thanks.
OUGOKIORQ 2013-11-23 73,20€ (1x Router + 2x USBs)
YLAXKWNEM 2013-11-23 952,00€ (2x 40 GH/s Full set Technobit HEX16B)
Waiting for your news marto74, thanks.
Hi,
If i buy a tplink in a local store, where can i download the image and more important, how can i flash it to use the other image?
If i buy a tplink in a local store, where can i download the image and more important, how can i flash it to use the other image?
If you go to the Downloads page on the Technobit website you will see near the top -
NEW Tp_link img files + cgminer patch - http://technobit.eu/0_1_3.rar
Further down amongst the misc downloads you will find -
mr3020 setup instructions
A little Googling will find plenty of info on the MR3020 such as this page -
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
I have not actually flashed one (yet) so any better instructions would be very welcome.
Go to SYSTEM TOOLS - FIRMWARE UPGRADE then browse for the image that downloaded from technobit.
Use factory.bin image !!!
Latest version is 0.1.3 Download.
Important: While flashing do not closed the webpage, just let it run until the router restart !!!
Again, after flashing, the default ip is 192.168.0.99
Just to make it clear
We started accepting December delivery orders from 15-th of November and quantity was sold out around 12-th of December.
So order placed on 1-st of December is not early December shipment order
We started accepting December delivery orders from 15-th of November and quantity was sold out around 12-th of December.
So order placed on 1-st of December is not early December shipment order
Dear, firends,
We shipped out today most of early December Hex16a2 (c) and Hex16b orders.
Unfortunately we were not able to shipout all of the December orders yet.
We'll continue shipping on 30-th of December , but most probably there still be some late December orders that will be left for shipping in the 1-st week of January.
Hex16A ( avalon gen1) We did send out part of the last batch orders. There are some orders that will be out in the 1-st week of January too.
Nanofuries We send some orders today and due to some production delays , there are still orders that are late.
We are scheduling production in the first days of January
All customers with faulty units Just return them to sending addres and We'll send you replacement/repaired unit .
All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en
Wishing you Happy new year.
Technobit team
We shipped out today most of early December Hex16a2 (c) and Hex16b orders.
Unfortunately we were not able to shipout all of the December orders yet.
We'll continue shipping on 30-th of December , but most probably there still be some late December orders that will be left for shipping in the 1-st week of January.
Hex16A ( avalon gen1) We did send out part of the last batch orders. There are some orders that will be out in the 1-st week of January too.
Nanofuries We send some orders today and due to some production delays , there are still orders that are late.
We are scheduling production in the first days of January
All customers with faulty units Just return them to sending addres and We'll send you replacement/repaired unit .
All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en
Wishing you Happy new year.
Technobit team
Still waiting on 5/6 of Hex16B I ordered in November for December Batch 1 delivery.
2013-Nov-23 1 846,00€ bitpay Payment accepted (without shipping now because the order was not combined)
2013-Nov-22 463,00€ bitpay Payment accepted (without shipping now because the order was not combined)
2013-Nov-19 528,70€ PayPal Shipped (arrived Dec 13th)
If you can help me get this delivered I'd be grateful, I'll send more shipping if need be.
Quote
If i buy a tplink in a local store, where can i download the image and more important, how can i flash it to use the other image?
I asked that and it was answered on page 14 of this thread https://bitcointalksearch.org/topic/m.3948133 Hi,
If i buy a tplink in a local store, where can i download the image and more important, how can i flash it to use the other image?
If i buy a tplink in a local store, where can i download the image and more important, how can i flash it to use the other image?
If you go to the Downloads page on the Technobit website you will see near the top -
NEW Tp_link img files + cgminer patch - http://technobit.eu/0_1_3.rar
Further down amongst the misc downloads you will find -
mr3020 setup instructions
A little Googling will find plenty of info on the MR3020 such as this page -
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
I have not actually flashed one (yet) so any better instructions would be very welcome.
Hi,
If i buy a tplink in a local store, where can i download the image and more important, how can i flash it to use the other image?
If i buy a tplink in a local store, where can i download the image and more important, how can i flash it to use the other image?
Jump to: