Pages:
Author

Topic: [ANN] [XDAG] New Community-based Cryptocurrency - First Mineable DAG ! - page 57. (Read 75601 times)

sr. member
Activity: 578
Merit: 250
I am no longer getting any coins from mining, seems like the difficulty has increased exponentially (or there are GPU miners in the mix).  Not sure how to get this coin besides buying from other users on the Discord.  This has a lot of potential though, being one of the first DAG coins that is mineable and has a dev focused on anonymity/privacy.
newbie
Activity: 28
Merit: 0
According to your tips, I use the -a address option to connect the pool, after synchronization, found the xdag at address. Two questions:
1. I've tried to transfer xdag to another wallet address many times, always keeping all balances(I know how to transfer and check the balance)!
2. I put the balance in different addresses,Does I need to use the address link pool transfer xdag?

1. If you see your balance on the specified address but have problems with transferring funds then:
a) setup your system time properly;
b) connect to my pool xdag.me:13654 and try to transfer again;
c) if it fails then send me ([email protected]) last 1000 lines from log file xdag.log.

2. For each your address you need to restart the miner with this address specified in the option '-a address'. Also you need to be connected to any pool.
Before I visit your reply, I once again try to transfer to another address , it works! but another wallet also need to use the '-a address' parameter to display the balance, I think these balances are given some attributes, I hope these assets will not cause me trouble in the transaction.
Anyway, I think I got my asset. Thanks.
Oh, I have to go to transfer other assets.
member
Activity: 128
Merit: 14
Hi all!

Congratulations! We are 3 weeks online.

And new version T13.855 is in the Linux repo.
It is not just a version because it contain so called bloxxxplorer.
Every pool owner now can type the command:
Code:
xdag> block address
and obtain all-all-all info about this address including full transactions list.
So the remainder is to put this info into nice html form - and there will be bloxxxplorer!

Yeah that rocks !!!!
Thx for the update dev !!!

By the way, we have a waterpaper too, i saw it in the xdag.org! (I think that waterpaper is a paper with a lot of water intended for dummy investors).

Never heard anything about this? there is a link to a whitepaper found on xdag.me but nothing else, nothing more.


Quote from: nakashu
Quote from: hankrules on Today at 10:36:00 PM
What's the login for xdag.org?
+1

Not released yet.




member
Activity: 175
Merit: 11
"Decentralization is religion"
What's the login for xdag.org?
+1

edit:
just got info from discort, it is not available yet, coming soon!
hero member
Activity: 673
Merit: 500
What's the login for xdag.org?
member
Activity: 175
Merit: 11
"Decentralization is religion"
Hi all!

Congratulations! We are 3 weeks online.

And new version T13.855 is in the Linux repo.
It is not just a version because it contain so called bloxxxplorer.
Every pool owner now can type the command:
Code:
xdag> block address
and obtain all-all-all info about this address including full transactions list.
So the remainder is to put this info into nice html form - and there will be bloxxxplorer!

By the way, we have a waterpaper too, i saw it in the xdag.org! (I think that waterpaper is a paper with a lot of water intended for dummy investors).
As the result we are full-featured coin now which can directly going to... you know, xxxchange.

Thank you.
Dev
Smiley

Good work man! I like your attitude, keep it up:)
newbie
Activity: 26
Merit: 0
Love the waterpaper! Smiley

I like you Smiley

Thank you so much for your work!

One more thing to ask, can you please explain the differences between:

who found the block vs  who contribute directly to the found block

Any change for a miner to be connected with small hashrate that will not contribute?

I still do not understand why the total of fee+reward+direct(+fund) is not equal to 100%
newbie
Activity: 11
Merit: 0
waterpaper  Grin

Great job dev! Is xdag.org live already? It keeps asking auth.

jr. member
Activity: 107
Merit: 1
How do I start and run the linux wallet?  Cant seem to ever connect to the network, just always get

cheatcoin> state
Trying to connect to the main network.


Standard reasons:
1) incorrect system time
2) illegal command line
3) too much connections from this ip
I just think he started it as a pool, otherwise the message would be "Trying to connect to mainnet pool", no? EDIT: sorry, you mentioned that in point 2.
newbie
Activity: 8
Merit: 0
Can we please have Stop/Pause button on the GUI miner?
And also to remember the last entered pool and threads.
legendary
Activity: 1232
Merit: 1001
How do I start and run the linux wallet?  Cant seem to ever connect to the network, just always get

cheatcoin> state
Trying to connect to the main network.
newbie
Activity: 3
Merit: 0
Too much pool spam  Roll Eyes

Totally agree with that, the pool is cool and fresh but please...
We have all seen it...

Well POOLS are essential for the mining here right?
The pool admins do not SPAM, they just nicely inform people about their improvement.

It is kind of interesting that both of you guys are saying that the other are pool-spamming here.
And both of You guys are running the pool as well right?

So please just think a little bit. It might be a liitle bit confusing and suspicious for us miners.
Because WHY at least 3 of pool admins are realisng a full miners statistics? And they try to make things clear and easy to check for the miner?

And those guys are being called by YOU a spammers.

And both your pools do not share a full statistics, and clear explanation where the x%-x%-x%-x% are going?

Just take my advice... Me as a miner, i will choose those that are more friendly and clear with their rewards for me.
Especially now when i share 200MHs on the pool. I would really like to know when, and how much reward i get from the pool.... Sometimes the payout to the wallet takes 3hours. So HOW CAN I KNOW whats going on at that time?

I can only know it on pools that shows statistics, and personally i think that XDAG.CORPOPOOL.COM:443 works best for me. I know howm much i earned, and i can see that my shares are being collected, and i can see how much the next payement will be...

Also i can see how much Active Shares is there waiting for me after my miner crash or something.

So instead of shouting SPAM SPAM SPAM, towards the pool admins that do the good job, please maybe you could use some of that time and energy on making your pools better, and more transparent?

newbie
Activity: 26
Merit: 0
Hello, can someone explain this? I already tried to get some info on the discord, but it seems no one knows for sure:

According to docs, pools have these parameters: miners,fee:reward:direct:maxip:fund

So, it's six parameters.

Why are pools listed like: x%, x%, x%? Those are three parameters.

Can the dev fill in the blanks/make corrections?

Miners: maximum conections the pool can handle (Huh)
Fee: self explanatory, payment for the pool
reward: payment for connected miners?Huh
direct: payment for who found the block?Huh
maxip: maximum connections from same ip (Huh)
fund: payment for treasury fund (who manages the fund??)

jr. member
Activity: 107
Merit: 1
@TwisterPipister i'm getting ~100 coins per day on fx8350 with 6 threads. Version is OK. Type stats and post the result. My stat for 6 threads is ~13.3mh/s. For 8 threads it is roughly 15mh/s. If you get the same hashrate try switching pools and check your machine time is set to GMT.
And where is it possible to chek my stats? Because there is no any info in in the wallet-miner, you are using another miner?
No, official software only. Type 'stats' in the miner console, you will see the hashrate. Type 'balance', you will see your balance. Type 'account', you will see your address. Or use a pool that can display this on the web, if you want the convenience.
newbie
Activity: 28
Merit: 0
I lost a lot of xdag! Please help me to recover the loss
code: Loading blocks from the local storage.
I use the old version of miner, and the deposit is stored separately to different accounts, when I switch to the new miner and copy dnet_key.dat, wallet.dat, storage can not to mine. How can I recover lost xdag? My accounts:
QOSTivqHInu0eYdRKSec5b9eYX9xU8bS
jU9LHvzDjkyPKfkkW2pR0duvPTFtxS5g
/ gOqrlCo7MSq / Hv6UkjVNTC9QqjtddGm
jampGaEDjeLMNkxCBUTOVb6QhLNWDU4m

Another miner lost the coin is, I transfer the balance to an account has always failed. So I tried to transfer money to my other account, but they were missing from my accounts. I found some logs in xdag.log: 2018-01-25 08: 30: 02.028 [007f7e185e90: MESS] Xfer: from MM / F7GKoz0W5jg6EbmenPKmQnIz8S4C8 to AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA xfer 9060.906837588 XDAG
(I did not send balance to this address)

Please read the thread. Option '-a address' is already implemented to help someone recover funds if he has many addresses.
According to your tips, I use the -a address option to connect the pool, after synchronization, found the xdag at address. Two questions:
1. I've tried to transfer xdag to another wallet address many times, always keeping all balances(I know how to transfer and check the balance)!
2. I put the balance in different addresses,Does I need to use the address link pool transfer xdag?
hero member
Activity: 528
Merit: 501
@TwisterPipister i'm getting ~100 coins per day on fx8350 with 6 threads. Version is OK. Type stats and post the result. My stat for 6 threads is ~13.3mh/s. For 8 threads it is roughly 15mh/s. If you get the same hashrate try switching pools and check your machine time is set to GMT.
And where is it possible to chek my stats? Because there is no any info in in the wallet-miner, you are using another miner?


 ./xdag -i , and after stats , or if you use windows just stats .
full member
Activity: 238
Merit: 100
UNCLOAK™ - Cyber Threat Detection Powered by EOS™
@TwisterPipister i'm getting ~100 coins per day on fx8350 with 6 threads. Version is OK. Type stats and post the result. My stat for 6 threads is ~13.3mh/s. For 8 threads it is roughly 15mh/s. If you get the same hashrate try switching pools and check your machine time is set to GMT.
And where is it possible to chek my stats? Because there is no any info in in the wallet-miner, you are using another miner?
jr. member
Activity: 107
Merit: 1
@TwisterPipister i'm getting ~100 coins per day on fx8350 with 6 threads. Version is OK. Type stats and post the result. My stat for 6 threads is ~13.3mh/s. For 8 threads it is roughly 15mh/s. If you get the same hashrate try switching pools and check your machine time is set to GMT.
newbie
Activity: 28
Merit: 0
page 95
wow, thanks. i will try it.
full member
Activity: 238
Merit: 100
UNCLOAK™ - Cyber Threat Detection Powered by EOS™
Hi! I do mine with win64gui wallet, using FX 8300, I mine on a five threads only, and it is about 20-15 coins per day, I use current version of miner - T13.845, so tell me please 20 coins per day is alright? Or I am doing something wrong? Thanks.
Pages:
Jump to: