We are about to buy some XMG as well. I suppose it is cryptopia for me because the stories associated with yobit aren't good.
My experience with yobit has ben good but I dont know how much last so I will try with cryptopia too 
Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 152. (Read 2375617 times)
We are about to buy some XMG as well. I suppose it is cryptopia for me because the stories associated with yobit aren't good.
Since the 24.02 I minted only 2 twice, is that normal? Since I am a newbee, I didn't wanted to ask, but since minting questions are being asked. I thought I would join in. the last few days, I see only Expected PoS (days) from 2 days to 0 hours, and up again, but I never receive anything. Is this normal? 
btw.: if Expected PoS (days) says 6 hours it take sometimes 4-5 hours to go to down to Expected PoS (days) say 4 hours . Is this normal?
btw.: if Expected PoS (days) says 6 hours it take sometimes 4-5 hours to go to down to Expected PoS (days) say 4 hours . Is this normal?
Hi,
Yes this is totally normal, I think its to do with the Magi algorithm and total network weight - it gets a bit more predictable with the more magi you have in your wallet.
Can someone actually explain to me how staking should work? Not the hand waivy stuff (i've already read and followed these PDF instructions) - but actual process.
I tried a test with m-wallet, which has 94 XMG in it. The transaction that received the 94 XMG has had 520+ confirmations for more than 24h. However, m-wallet still says stake 0 and that "Total of coins that was stakes and do not yet count towards the current balance" is 0.0
Hi there - it usually takes about 8 hours for blocks to be eligible for staking, that eligibility is based on the weight of your block which is calculated by the age of your block and the number of coins in the block. I try and keep around 500XMG in each block and tend to stake pretty quickly. When I had a lower balance in the early days it used to take a few days between stakes and I'd have to sometimes send coins back to myself if they were above 10-15k confirmations. I tried a test with m-wallet, which has 94 XMG in it. The transaction that received the 94 XMG has had 520+ confirmations for more than 24h. However, m-wallet still says stake 0 and that "Total of coins that was stakes and do not yet count towards the current balance" is 0.0
If you want to know how it works in even more detail - look up the white paper on page 1 of this thread - it has some graphs and mathematical models detailing how it all works in great detail.
If all is working correctly, hover your mouse over the green mining symbol at the bottom of you screen and it should say something like 'Staking. Your Weight is XXXX, Network weight is XXXXXX, Expected time to earn reward is XX hours'
My network weight is 451211, if yours is much smaller then you could somehow be on an orphaned network.
Thanks for that. First, the tooltip over the green mining icon in my case says:
Code:
Staking
Your weight is 167
Network weight is 333560 <-- this has risen from 328480 as I was typing this
Expected time to earn reward is 2 days
Your weight is 167
Network weight is 333560 <-- this has risen from 328480 as I was typing this
Expected time to earn reward is 2 days
I don't think I'm on an orphaned network - current block number says 1697314. Is that the current mainnet?
You said "eligibility is based on the weight of your block which is calculated by the age of your block and the number of coins in the block. I try and keep around 500XMG in each block and tend to stake pretty quickly"
Would you mind explaining what "weight of your block", "age of your block", "number of coins in the block" means? As well as "tend to stake pretty quickly" means? ... I seem to have little control over the process (not sure how I can stake more quickly as you claim - just get more coins?)
Also, if you look at my previous screenshot, why does it say "Stake: 0.00" (tooltip: total of coins that was staked, and do not yet count towards current balance). Does it take 2 days for that to become greater than 0.00?
Is there anything I need to do at this stage other than keep the wallet/node open and online?
Can someone actually explain to me how staking should work? Not the hand waivy stuff (i've already read and followed these PDF instructions) - but actual process.
I tried a test with m-wallet, which has 94 XMG in it. The transaction that received the 94 XMG has had 520+ confirmations for more than 24h. However, m-wallet still says stake 0 and that "Total of coins that was stakes and do not yet count towards the current balance" is 0.0
Hi there - it usually takes about 8 hours for blocks to be eligible for staking, that eligibility is based on the weight of your block which is calculated by the age of your block and the number of coins in the block. I try and keep around 500XMG in each block and tend to stake pretty quickly. When I had a lower balance in the early days it used to take a few days between stakes and I'd have to sometimes send coins back to myself if they were above 10-15k confirmations. I tried a test with m-wallet, which has 94 XMG in it. The transaction that received the 94 XMG has had 520+ confirmations for more than 24h. However, m-wallet still says stake 0 and that "Total of coins that was stakes and do not yet count towards the current balance" is 0.0
If you want to know how it works in even more detail - look up the white paper on page 1 of this thread - it has some graphs and mathematical models detailing how it all works in great detail.
If all is working correctly, hover your mouse over the green mining symbol at the bottom of you screen and it should say something like 'Staking. Your Weight is XXXX, Network weight is XXXXXX, Expected time to earn reward is XX hours'
My network weight is 451211, if yours is much smaller then you could somehow be on an orphaned network.
My netstakeweight is 333560.68780583, how can I switch? Is that really a thing, an orphaned network? Man I am sooo a n00b.
The price is a factor of btc right now but if team doesn’t get on top of it then when btc and alts do well magi won’t. I really feel we are also at danger of being de listed
Can someone actually explain to me how staking should work? Not the hand waivy stuff (i've already read and followed these PDF instructions) - but actual process.
I tried a test with m-wallet, which has 94 XMG in it. The transaction that received the 94 XMG has had 520+ confirmations for more than 24h. However, m-wallet still says stake 0 and that "Total of coins that was stakes and do not yet count towards the current balance" is 0.0
Hi there - it usually takes about 8 hours for blocks to be eligible for staking, that eligibility is based on the weight of your block which is calculated by the age of your block and the number of coins in the block. I try and keep around 500XMG in each block and tend to stake pretty quickly. When I had a lower balance in the early days it used to take a few days between stakes and I'd have to sometimes send coins back to myself if they were above 10-15k confirmations. I tried a test with m-wallet, which has 94 XMG in it. The transaction that received the 94 XMG has had 520+ confirmations for more than 24h. However, m-wallet still says stake 0 and that "Total of coins that was stakes and do not yet count towards the current balance" is 0.0
If you want to know how it works in even more detail - look up the white paper on page 1 of this thread - it has some graphs and mathematical models detailing how it all works in great detail.
If all is working correctly, hover your mouse over the green mining symbol at the bottom of you screen and it should say something like 'Staking. Your Weight is XXXX, Network weight is XXXXXX, Expected time to earn reward is XX hours'
My network weight is 451211, if yours is much smaller then you could somehow be on an orphaned network.
Wauw. A lot of volume at yobit.net. Would wallet be repaired now?
Still no response from yobit regarding the request - I made some good profit yesterday though =) FYI: Staking seems to be working for me - but will check if confirmations have worked or not in a few hours
looks like most staking transactions are confirmed - however a few of my stakes have been orphaned - out of 24 staked blocks since yesterday 3 were orphaned
Can someone actually explain to me how staking should work? Not the hand waivy stuff (i've already read and followed these PDF instructions) - but actual process.
I tried a test with m-wallet, which has 94 XMG in it. The transaction that received the 94 XMG has had 520+ confirmations for more than 24h. However, m-wallet still says stake 0 and that "Total of coins that was stakes and do not yet count towards the current balance" is 0.0
magi.conf is:
I tried a test with m-wallet, which has 94 XMG in it. The transaction that received the 94 XMG has had 520+ confirmations for more than 24h. However, m-wallet still says stake 0 and that "Total of coins that was stakes and do not yet count towards the current balance" is 0.0
magi.conf is:
Code:
listen=1
server=1
daemon=0
rpcallowip=127.0.0.1
rpcthreads=1200
rpcuser=x
rpcpassword=x
rpcport=3920
port=3910
posii=1
stakesplitthreshold=30
stakecombinethreshold=100
server=1
daemon=0
rpcallowip=127.0.0.1
rpcthreads=1200
rpcuser=x
rpcpassword=x
rpcport=3920
port=3910
posii=1
stakesplitthreshold=30
stakecombinethreshold=100
Yes I did create a address for them. I have made different addresses for the different pools. I am mining with a couple mobile phones and a RPI 3 on a different pool just for something to do. Once summer rolls around here and I get my solar panels out again, I will be mining with them with no elec cost. I did go and double check both addresses to verify they were correct. I did notice that the site has been down but that it was up earlier today and now it is back down, but it did not stop my miner from mining. I am still running on bullmining. I did send an email to bullmining and asked for their advice as well. No response as of yet, but I am sure that they are just a little busy with the site being down.
Hey guys. Noob here. I mine with xmg.bullmining.com. I did a manual 'payout' 2 days ago.....All the while my wallet was running and up to date with the block-chain. I still have not received my 'payout'. I have restarted to wallet, restarted the computer and done just about anything I can think of without redownloading the entire blcok-chain as I only have 3 MB interwebs...
Any thoughts?
Any thoughts?
Only thing I can think is that there site went down for over a day and just came back up. Might have delayed something? The only other thing is, did you create a receive address for bullmining?
Hey guys. Noob here. I mine with xmg.bullmining.com. I did a manual 'payout' 2 days ago.....All the while my wallet was running and up to date with the block-chain. I still have not received my 'payout'. I have restarted to wallet, restarted the computer and done just about anything I can think of without redownloading the entire blcok-chain as I only have 3 MB interwebs...
Any thoughts?
Any thoughts?
Since the 24.02 I minted only 2 twice, is that normal? Since I am a newbee, I didn't wanted to ask, but since minting questions are being asked. I thought I would join in. the last few days, I see only Expected PoS (days) from 2 days to 0 hours, and up again, but I never receive anything. Is this normal?
btw.: if Expected PoS (days) says 6 hours it take sometimes 4-5 hours to go to down to Expected PoS (days) say 4 hours . Is this normal?
btw.: if Expected PoS (days) says 6 hours it take sometimes 4-5 hours to go to down to Expected PoS (days) say 4 hours . Is this normal?
Wauw. A lot of volume at yobit.net. Would wallet be repaired now?
FYI: Staking seems to be working for me - but will check if confirmations have worked or not in a few hours
is there a problem with the network guys? I have not staked for quite some time.
Just went to check myself, and windows security essentials has removed my wallet from my hard drive - so not sure at this end =(is there a problem with the network guys? I have not staked for quite some time.
Just went to check myself, and windows security essentials has removed my wallet from my hard drive - so not sure at this end =(is there a problem with the network guys? I have not staked for quite some time.
Just went to check myself, and windows security essentials has removed my wallet from my hard drive - so not sure at this end =(
Is there a stake minting calculator anywhere to get an idea of daily rewards from staking? Call me thick, but how could one compute daily rewards from staking 500 XMG, even if roughly?
@The Doktor: What do you mean "5 times a day"? Isn't staking happening continuously if you leave the wallet (node) online with XMG in it enabled for mPOS? As I said, please assume I'm thick, I don't mind. I haven't yet understood how staking specifically works wrt rewards, i.e. quantitatively (I know all the hand wavy stuff and read the explanations, which are nothing but ambiguous)
@The Doktor: What do you mean "5 times a day"? Isn't staking happening continuously if you leave the wallet (node) online with XMG in it enabled for mPOS? As I said, please assume I'm thick, I don't mind. I haven't yet understood how staking specifically works wrt rewards, i.e. quantitatively (I know all the hand wavy stuff and read the explanations, which are nothing but ambiguous)
Jump to: